Hey guys, I still have some stuff left for sale. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmanz69 · 09-12-2004, 09:19 PM

I need to get rid of my leftover parts. My new project is needing the room and the funds to help it along.

I have a set of front bumper brackets from a 69 1/2 ton. How about $10 shipped. SOLD

I have 2 5 lug center caps, have a few of the bolts that hold them on but not all. Driver quality, not show. Could use new center stickers (avail at dealer). $7 shipped. SOLD

I have a hydroboost setup from a mid 80's diesel. Has the firewall plate and rod that goes to pedal. Needs new hoses (avail at NAPA). $40 shipped.

I have 2 sets of shortbed stepside bedsides, not the fenders. Both are in fair shape. Could probably be fixed with very little effort, or use for your driver. Must be picked up at my house, I will not ship. $10 each

I have a straight stepside tailgate that needs blasted and painted. It has the Chevrolet stamped in it. Could be a very nice piece. I will not ship this either. All large items must be picked up here. $15

I also have a set of under bed rails for a short step side. I had them blasted and powder coated. I have all but the small rails that only connect to the wood. The frame rails are the ones I had cleaned. They must be picked up. $50

I have other stuff, just can't think of it now. If you want pics of any of it, let me know. I would rather let it go cheap than junk it.

70c10 · 09-12-2004, 09:50 PM

I'm interested in the front bumper brackets if they have the small brackets that bolt to the front of the frame rail. Those 2 small pieces are the only pieces I really need.

jmanz69 · 09-12-2004, 09:59 PM

Jim,

I know I have one of those brackets, I think the other is still attached to the bumper. The one I have is powder coated black, the other wouldn't be. The long brackets are just primed and painted black. Let me look tomorrow and see if the second bracket is still there.

70c10 · 09-12-2004, 10:06 PM

That sounds great. Let me know and I'll send payment immediately. Thanks

67ChevyC10Stepside · 09-12-2004, 11:54 PM

man i would like to have those sides and tailgate but that's quite a drive for me.

jmanz69 · 09-13-2004, 06:30 AM

67ChevyC10Stepside

I can send you pics if you want. The sides could, if nothing else, be used to make patches for your existing sides. I think they are in pretty good shape though, just need blasted and straightened a little.

jmanz69 · 09-13-2004, 11:43 AM

ttt

70c10 · 09-13-2004, 01:26 PM

Did you get a chance to check on those small brackets?

jmanz69 · 09-13-2004, 07:32 PM

I just got home, I will go look now.

Jmanz69

jmanz69 · 09-13-2004, 07:47 PM

I do have both small brackets. One is powder coated and the other isn't. I will have to cut the bolt out of the second one as it is still in the bumper. But it shouldn't be a problem. You want all 4 brackets?

jmanz69

billsbowtie · 09-13-2004, 09:04 PM

If You Still Have The 2 Five Lug Ralley Center Caps And What Bolts You Have Pm Me Your Address And I Will Take Them Thanks

70c10 · 09-13-2004, 11:10 PM

jmanz69, yes I'll take all 4 pieces. PM me with payment details. Thanks

jmanz69 · 09-14-2004, 06:31 AM

Bumper brackets are sold as well as the center caps. Thanks guys.

09-12-2004, 09:19 PM	#1
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Hey guys, I still have some stuff left for sale. I need to get rid of my leftover parts. My new project is needing the room and the funds to help it along. I have a set of front bumper brackets from a 69 1/2 ton. How about $10 shipped. SOLD I have 2 5 lug center caps, have a few of the bolts that hold them on but not all. Driver quality, not show. Could use new center stickers (avail at dealer). $7 shipped. SOLD I have a hydroboost setup from a mid 80's diesel. Has the firewall plate and rod that goes to pedal. Needs new hoses (avail at NAPA). $40 shipped. I have 2 sets of shortbed stepside bedsides, not the fenders. Both are in fair shape. Could probably be fixed with very little effort, or use for your driver. Must be picked up at my house, I will not ship. $10 each I have a straight stepside tailgate that needs blasted and painted. It has the Chevrolet stamped in it. Could be a very nice piece. I will not ship this either. All large items must be picked up here. $15 I also have a set of under bed rails for a short step side. I had them blasted and powder coated. I have all but the small rails that only connect to the wood. The frame rails are the ones I had cleaned. They must be picked up. $50 I have other stuff, just can't think of it now. If you want pics of any of it, let me know. I would rather let it go cheap than junk it. Last edited by jmanz69; 09-14-2004 at 06:31 AM.

09-12-2004, 09:50 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I'm interested in the front bumper brackets if they have the small brackets that bolt to the front of the frame rail. Those 2 small pieces are the only pieces I really need. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-12-2004, 10:06 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	That sounds great. Let me know and I'll send payment immediately. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-12-2004, 11:54 PM	#5
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	man i would like to have those sides and tailgate but that's quite a drive for me. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-13-2004, 01:26 PM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Did you get a chance to check on those small brackets? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-12-2004, 09:59 PM	#3
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Jim, I know I have one of those brackets, I think the other is still attached to the bumper. The one I have is powder coated black, the other wouldn't be. The long brackets are just primed and painted black. Let me look tomorrow and see if the second bracket is still there.

09-13-2004, 06:30 AM	#6
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	67ChevyC10Stepside I can send you pics if you want. The sides could, if nothing else, be used to make patches for your existing sides. I think they are in pretty good shape though, just need blasted and straightened a little.

09-13-2004, 11:43 AM	#7
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	ttt

09-13-2004, 07:32 PM	#9
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I just got home, I will go look now. Jmanz69

09-13-2004, 07:47 PM	#10
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I do have both small brackets. One is powder coated and the other isn't. I will have to cut the bolt out of the second one as it is still in the bumper. But it shouldn't be a problem. You want all 4 brackets? jmanz69

09-13-2004, 09:04 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	If You Still Have The 2 Five Lug Ralley Center Caps And What Bolts You Have Pm Me Your Address And I Will Take Them Thanks

09-13-2004, 11:10 PM	#12
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	jmanz69, yes I'll take all 4 pieces. PM me with payment details. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-14-2004, 06:31 AM	#13
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Bumper brackets are sold as well as the center caps. Thanks guys.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.