Anybody tried the newer style Impala rear brakes?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 03-11-2009, 06:31 PM

I'm talking about the 2000's style? Didn't know if they would work or not.

PanelDeland · 03-11-2009, 07:20 PM

They work,at least to stop Impala's.I don't know about on a custom Blazer Roadster.

*project 67 sub* · 03-11-2009, 08:09 PM

probably not because i think that the newer(2000+, could be wrong though) are front wheel drive

**mr48chev** · 03-11-2009, 08:29 PM

The rotors come off the hubs but from looking at what else they fit I think that they don't have a five on five bolt pattern.
Here is an Ebay link to a GM bot pattern guide. According to it the 2K Impalas have a 115 mm bolt pattern while the five on five equals 127 mm.
http://reviews.ebay.com/ebaymotors/W...00000009549901
Handy guide to save.

I'd take a look at rotors off the front or rear of a 77 Cad Eldorado .
As they are five on five and not real spendy. Being as they are two different part numbers they may have a different offset and or center hole diameter.
A lot of the guys doing rear disk conversions use the rear caliper from those year Eldo's to get the park brake setup. Brackets are readily available for the 4x4 brigade and may fit the two wheel drive housing also.

5150 · 03-11-2009, 11:26 PM

Quote:

They work,at least to stop Impala's.I don't know about on a custom Blazer Roadster.

It's not for my roadster, I bought the Blackbird Kit.

PanelDeland · 03-12-2009, 08:12 AM

Bryan,It's getting close to meets season.I was just giving you a hard time so's I would be in top form for that.

5150 · 03-13-2009, 08:47 AM

C'mon now Deland, like me, it doesn't take you long to get in that mode

03-11-2009, 06:31 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Anybody tried the newer style Impala rear brakes?? I'm talking about the 2000's style? Didn't know if they would work or not. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-11-2009, 07:20 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Anybody tried the newer style Impala rear brakes?? They work,at least to stop Impala's.I don't know about on a custom Blazer Roadster. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-11-2009, 08:09 PM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Anybody tried the newer style Impala rear brakes?? probably not because i think that the newer(2000+, could be wrong though) are front wheel drive

03-11-2009, 08:29 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Anybody tried the newer style Impala rear brakes?? The rotors come off the hubs but from looking at what else they fit I think that they don't have a five on five bolt pattern. Here is an Ebay link to a GM bot pattern guide. According to it the 2K Impalas have a 115 mm bolt pattern while the five on five equals 127 mm. http://reviews.ebay.com/ebaymotors/W...00000009549901 Handy guide to save. I'd take a look at rotors off the front or rear of a 77 Cad Eldorado . As they are five on five and not real spendy. Being as they are two different part numbers they may have a different offset and or center hole diameter. A lot of the guys doing rear disk conversions use the rear caliper from those year Eldo's to get the park brake setup. Brackets are readily available for the 4x4 brigade and may fit the two wheel drive housing also. Last edited by mr48chev; 03-11-2009 at 08:39 PM.

03-12-2009, 08:12 AM	#6
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Anybody tried the newer style Impala rear brakes?? Bryan,It's getting close to meets season.I was just giving you a hard time so's I would be in top form for that. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-13-2009, 08:47 AM	#7
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Anybody tried the newer style Impala rear brakes?? C'mon now Deland, like me, it doesn't take you long to get in that mode __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.