What did you get done 1/9/11 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 01-09-2011, 08:32 PM

I spent the weekend in Atlantic City celebrating my wife's birthday. Unfortunately I do not own any casinos due to my vast winnings so im still here as your moderator... As to trucks i didnt do anything except to still mull over the second C10 im thinking of buying
How about you all?

*87 chevy silverado* · 01-09-2011, 08:38 PM

did a lil painting on the new motor and brackets

S10Fan · 01-09-2011, 08:50 PM

Took my trucks out for a little exercise. Organized 1 drawer in my tool box and called it a day. LOL

Took the family to Bonefish Grill for a nice pig out session, time for a nap.

flamingbig10 · 01-09-2011, 08:50 PM

I finally got a good 4l80e and cleaned up the throttle body and belt tensionor then installed a new tensionor pulley the old one was broke. Saturday I started tearing down my truck and gutted out the interior and removed the patch panels, Then I swapped over the parts from my good frame to my truck so I can clean up and paint the good suspension parts, Today I didn't get any thing done because of the snow

I left the three inch drop springs in for a simple install

Benelli · 01-09-2011, 09:23 PM

found out i have a brake fluid leak

otherwise just a lot of goose hunting

D13 · 01-09-2011, 09:30 PM

Drove out to the family farm to finish getting my 35 years of collection. Put 2 engines(SBC and 455 Buick), 5 auto transmissions, a couple spare heads, intakes, and tin, on the 3/4 to Xcab. Weighted it down so bad I had to leave the trailer and engine hoist. But all that's left there are tools.
Today I finished cleaning up my new Monojet, then took all the parts off the truck, stashed some in my barn, had to drop the big BOOick out side as I ran out of time to shuffle stuff, came in and celebrated the little one's 14th with shicken soup and chocolate cherry skillit cake. Yum!

Next: I disassemble and scrap an S10 blazer to fund the replacment for my rod knocking 6.2 diesel in the 87.

BigRed76 · 01-09-2011, 09:35 PM

I started working on my 4" shackle flip kit on thursday, finished it up friday afternoon. Took a little while but I'm really pleased with the results

Worked all day Saturday and didn't get anything done today since it was dumping snow outside.

Justins76 · 01-09-2011, 09:37 PM

New upper control arm bushings.

bigblock73 · 01-09-2011, 10:34 PM

Well, I didn't get my 1 piece windows in or my headliner/sunvisors installed...for reasons out of my control. Anyone want to buy a partially finished 73 C10?

**PRattenbury** · 01-09-2011, 10:44 PM

I got my truck into my garage finally. That took weeks of cleaning and organizing. I can imagine how long it'll take me to do what needs done to it. It could be years.

f.monroe · 01-09-2011, 11:13 PM

Quote:

Originally Posted by bigblock73

Well, I didn't get my 1 piece windows in or my headliner/sunvisors installed...for reasons out of my control. Anyone want to buy a partially finished 73 C10?

None of that sounds good.

f.monroe · 01-09-2011, 11:16 PM

I intended to attend a local get together but the weather did not play along so the truck just sat. I did get some deer processed ans seasoned a batch of jerky. I hope to have a nice tasty snack soon.
Frank

**N2TRUX** · 01-10-2011, 12:13 PM

Quote:

Originally Posted by f.monroe

I intended to attend a local get together but the weather did not play along so the truck just sat.

Yeah, that sucked as I had plans of going too.

Saturday the weather was awesome, so I played in the garage. I finally got my e3 ECU installed and the display mounted. I recalibrated the system to run off bag pressure, and it works great. Now I have to reinstall the ride height sensors and get that part working correctly.

As mentioned I had plans of going to a Rod Run on Sunday, but the weather was horrible. Probably a good thing I didn't go because I noticed a leak at the base of my water pump while taking some motor shots Saturday evening.

Buick455 · 01-09-2011, 11:14 PM

Modified my rear shackles as posted yesterday. Today I ground and sanded by rear 3/4 ton leaf springs. I have 6 more to do before I prep them for paint. I had to quit to service my oil furnace in the house which I got done.

mongoose · 01-10-2011, 12:24 AM

Nothing much... Spent most of this weekend playing video games... Breaking in my new mouse and keyboard/steering wheel... bit nerdy? I think so..

other than that.. Picked up these... and some mdf to make some music with... should be decent enough... well for now.

AuggieStyle · 01-10-2011, 01:06 AM

http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEDWX:IT

took a nap and missed out on this tach i got out bidded ....

Big Port Jimmy 6 · 01-10-2011, 11:39 AM

Installed the new pumps on my meters, repaired my tank straps(the PO trimmed the bolts off) installed the tanks and plumbed up the switching valve. Put the truck on the floor for the first time since Aug. Reinstalled the dash cluster, bezel and radio. Painted the grille under the cowl panel and stuck it and the cowl back on. Re-flared the return line to 37°. Installed a new fuel filter and started routing the pressure line All in all not too bad for a ½ Friday and Saturday. Next stop the rack, so I can finish the fuel line, trans lines and do the exhaust. Starting to see some light at the end of the tunnel. Jay

ECU PIRATE · 01-10-2011, 04:27 PM

Nothing truck related besides breaking down my clutch / brake pedal assembly I picked up at Christmas so my buddy can sandblast it for me along with a couple of other parts. I did manage to pick up this fine little backyard toy from a buddy for free. A little rough but, nothing and angle grinder and some paint can't take care off

S10Fan · 01-10-2011, 04:51 PM

Quote:

Originally Posted by ECU PIRATE

A little rough but, nothing and angle grinder and some paint can't take care off

Sounds just like the trucks we love so much!

east1la · 01-10-2011, 06:26 PM

went joy riding my 1987 chevy pickup in town. Then surf the world wide web, looking for my parts for my pickup truck (rims, lowering kit, etc...). hope to get parts when tax time comes.

jitteryguy · 01-10-2011, 07:01 PM

travel'd 10'000 miles to see my girl and meet my Grandaughter !

rjn72 · 01-10-2011, 07:23 PM

Got some snow here in central arkansas. So I tried out my crew cab 4x4 dually. First snow since I got my truck. Needless to say I am way impressed. I pulled out a 4x4 dodge. and took my pastor some rocks for his truck so he could get home. Also moved a van so a woman could get it parked and then took her home. Then today, I went to uams, a hospital in arkansas, and picked up our good freinds and brought them and their new twin daughters home. I think I love my truck. My wife says it is the best money we have ever spent.

Jonboy · 01-10-2011, 08:01 PM

Quote:

Originally Posted by rjn72

My wife says it is the best money we have ever spent.

That's odd, my wife has yet to ever utter that phrase.

swb85 · 01-10-2011, 11:07 PM

Got new upholstery for my bench seat for xmas, finally got some time to install it. I have a whole new respect for the people that do upholstery for a living, that sucked. Luckily the foam was all in great shape, but had 2 broken springs from my fat butt that I had to repair. I'm satisfied with it for my first attempt at something like this.....but next time I'm dropping it off and writing a check.

Before:

After:

bmchevy1979 · 01-11-2011, 12:12 AM

Got cam and other parts for my blazer on Tuesday installed a Kenwood Sound system in my moms 96 Jeep Grand Cherokee on Wed/Thurs. Friday started working on cleaning parts to finish 400sb Sat. started on install on cam and Sunday afternoon got motor finished all but intake and today went back to school okay maybe this was my week but this what I did WINTER BREAK WAS TO SHORT HAVE TO WAIT 2 WEEKS BEFORE I CAN HERE IT RUN

01-09-2011, 08:32 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,302	What did you get done 1/9/11 edition I spent the weekend in Atlantic City celebrating my wife's birthday. Unfortunately I do not own any casinos due to my vast winnings so im still here as your moderator... As to trucks i didnt do anything except to still mull over the second C10 im thinking of buying How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-09-2011, 08:38 PM	#2
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: What did you get done 1/9/11 edition did a lil painting on the new motor and brackets

01-09-2011, 08:50 PM	#3
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done 1/9/11 edition Took my trucks out for a little exercise. Organized 1 drawer in my tool box and called it a day. LOL Took the family to Bonefish Grill for a nice pig out session, time for a nap. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

01-09-2011, 08:50 PM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done 1/9/11 edition I finally got a good 4l80e and cleaned up the throttle body and belt tensionor then installed a new tensionor pulley the old one was broke. Saturday I started tearing down my truck and gutted out the interior and removed the patch panels, Then I swapped over the parts from my good frame to my truck so I can clean up and paint the good suspension parts, Today I didn't get any thing done because of the snow I left the three inch drop springs in for a simple install __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 01-09-2011 at 08:56 PM.

01-09-2011, 09:23 PM	#5
Benelli Watchin the rust grow Join Date: Oct 2008 Location: Western Nebraska Posts: 950	Re: What did you get done 1/9/11 edition found out i have a brake fluid leak otherwise just a lot of goose hunting __________________ 1979 Chevy K10 (H/D Front end) - 350 w/ Holley Truck Avenger, Weinald Intake manifold, headers, bored .060 over, mild cam, Built up TH350 (TranStar Shift kit) with a part-timed NP203 t-case SOLD ($3,000) 1997 Chevy Silverado 1500 - 4.3 vortec, extended cab, 21 highway MPG, stock. "Red" SOLD ($3,000) 1987 Toyota 4wd Pick-up - work in progress, future DD SOLD ($1,850) 1998 Dodge Ram 2500 Cummins 5spd Quad cab - old 12 valve with some work done 2004 Chevy Silverado - Black, 4x4, 5.3L, stock for now Underneath that rust is a heart of gold

01-09-2011, 09:30 PM	#6
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done 1/9/11 edition Drove out to the family farm to finish getting my 35 years of collection. Put 2 engines(SBC and 455 Buick), 5 auto transmissions, a couple spare heads, intakes, and tin, on the 3/4 to Xcab. Weighted it down so bad I had to leave the trailer and engine hoist. But all that's left there are tools. Today I finished cleaning up my new Monojet, then took all the parts off the truck, stashed some in my barn, had to drop the big BOOick out side as I ran out of time to shuffle stuff, came in and celebrated the little one's 14th with shicken soup and chocolate cherry skillit cake. Yum! Next: I disassemble and scrap an S10 blazer to fund the replacment for my rod knocking 6.2 diesel in the 87. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors Last edited by D13; 01-09-2011 at 09:31 PM.

01-09-2011, 09:35 PM	#7
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: What did you get done 1/9/11 edition I started working on my 4" shackle flip kit on thursday, finished it up friday afternoon. Took a little while but I'm really pleased with the results Worked all day Saturday and didn't get anything done today since it was dumping snow outside. Attached Images __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

01-09-2011, 09:37 PM	#8
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: What did you get done 1/9/11 edition New upper control arm bushings. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

01-09-2011, 10:34 PM	#9
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: What did you get done 1/9/11 edition Well, I didn't get my 1 piece windows in or my headliner/sunvisors installed...for reasons out of my control. Anyone want to buy a partially finished 73 C10? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-09-2011, 10:44 PM	#10
PRattenbury Senior Member Join Date: Feb 2010 Location: Maumelle, AR Posts: 478	Re: What did you get done 1/9/11 edition I got my truck into my garage finally. That took weeks of cleaning and organizing. I can imagine how long it'll take me to do what needs done to it. It could be years.

01-09-2011, 11:16 PM	#12
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: What did you get done 1/9/11 edition I intended to attend a local get together but the weather did not play along so the truck just sat. I did get some deer processed ans seasoned a batch of jerky. I hope to have a nice tasty snack soon. Frank __________________ Born and proudly residing in a Red State !

01-09-2011, 11:14 PM	#14
Buick455 Registered User Join Date: Mar 2010 Location: Amherst VA Posts: 150	Re: What did you get done 1/9/11 edition Modified my rear shackles as posted yesterday. Today I ground and sanded by rear 3/4 ton leaf springs. I have 6 more to do before I prep them for paint. I had to quit to service my oil furnace in the house which I got done.

01-10-2011, 12:24 AM	#15
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: What did you get done 1/9/11 edition Nothing much... Spent most of this weekend playing video games... Breaking in my new mouse and keyboard/steering wheel... bit nerdy? I think so.. other than that.. Picked up these... and some mdf to make some music with... should be decent enough... well for now. Attached Images __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

01-10-2011, 01:06 AM	#16
AuggieStyle Registered User Join Date: Apr 2007 Location: Dallas,TX. Posts: 499	Re: What did you get done 1/9/11 edition http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEDWX:IT took a nap and missed out on this tach i got out bidded ....

01-10-2011, 11:39 AM	#17
Big Port Jimmy 6 Addicted to Rust Join Date: Dec 2009 Location: Abbeville SC Posts: 1,030	Re: What did you get done 1/9/11 edition Installed the new pumps on my meters, repaired my tank straps(the PO trimmed the bolts off) installed the tanks and plumbed up the switching valve. Put the truck on the floor for the first time since Aug. Reinstalled the dash cluster, bezel and radio. Painted the grille under the cowl panel and stuck it and the cowl back on. Re-flared the return line to 37°. Installed a new fuel filter and started routing the pressure line All in all not too bad for a ½ Friday and Saturday. Next stop the rack, so I can finish the fuel line, trans lines and do the exhaust. Starting to see some light at the end of the tunnel. Jay __________________ Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public.



Register or Log In To remove these advertisements.

01-10-2011, 04:27 PM	#18
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: What did you get done 1/9/11 edition Nothing truck related besides breaking down my clutch / brake pedal assembly I picked up at Christmas so my buddy can sandblast it for me along with a couple of other parts. I did manage to pick up this fine little backyard toy from a buddy for free. A little rough but, nothing and angle grinder and some paint can't take care off Attached Images __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

01-10-2011, 06:26 PM	#20
east1la Registered User Join Date: Sep 2010 Location: nc Posts: 16	Re: What did you get done 1/9/11 edition went joy riding my 1987 chevy pickup in town. Then surf the world wide web, looking for my parts for my pickup truck (rims, lowering kit, etc...). hope to get parts when tax time comes.

01-10-2011, 07:01 PM	#21
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: What did you get done 1/9/11 edition travel'd 10'000 miles to see my girl and meet my Grandaughter ! Attached Images __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

01-10-2011, 07:23 PM	#22
rjn72 Registered User Join Date: Mar 2010 Location: el paso, ar Posts: 139	Re: What did you get done 1/9/11 edition Got some snow here in central arkansas. So I tried out my crew cab 4x4 dually. First snow since I got my truck. Needless to say I am way impressed. I pulled out a 4x4 dodge. and took my pastor some rocks for his truck so he could get home. Also moved a van so a woman could get it parked and then took her home. Then today, I went to uams, a hospital in arkansas, and picked up our good freinds and brought them and their new twin daughters home. I think I love my truck. My wife says it is the best money we have ever spent. __________________ JESUS IS LORD 87 crew cab V30 454/400

01-10-2011, 11:07 PM	#24
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: What did you get done 1/9/11 edition Got new upholstery for my bench seat for xmas, finally got some time to install it. I have a whole new respect for the people that do upholstery for a living, that sucked. Luckily the foam was all in great shape, but had 2 broken springs from my fat butt that I had to repair. I'm satisfied with it for my first attempt at something like this.....but next time I'm dropping it off and writing a check. Before: After: __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

01-11-2011, 12:12 AM	#25
bmchevy1979 Registered User Join Date: Dec 2010 Location: Visalia, Ca Posts: 707	Re: What did you get done 1/9/11 edition Got cam and other parts for my blazer on Tuesday installed a Kenwood Sound system in my moms 96 Jeep Grand Cherokee on Wed/Thurs. Friday started working on cleaning parts to finish 400sb Sat. started on install on cam and Sunday afternoon got motor finished all but intake and today went back to school okay maybe this was my week but this what I did WINTER BREAK WAS TO SHORT HAVE TO WAIT 2 WEEKS BEFORE I CAN HERE IT RUN __________________ <Brandon> 1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15 81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in 1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096 1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195

Register or Log In To remove these advertisements.