![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
What did you get done- Memorial weekend edition
I'm sure a lot of you guys and gals took the weekend off and went somewhere with the family or friends. Normally I go to a car show every Memorial weekend. This year it was canceled, so I stayed at home and worked around the house. I actullay got quit a bit done for a change.
Saturday morning I get up and cleaned my wifes Denali. All I had done to it for a few weeks was give it a quickie wash when it was dirty. It was time for a detail, so I spent a couple of hours cleaning it up inside and out. Then I took it to Jiffy-Lube for a state inspection and an oil change. I found out the tranfer case has a leak at one of the seals, so it gets a trip to the dealer. Oh Joy! Got home and cleaned the swimming pool, scrubbed algae from the waterfall, and serviced the equipment. Cleaned the deck around the pool, and worked on the flower beds for a couple of hours. Long enough to fill 5 bags full of trimmimgs. Replaced the latch on my gate leading to my back yard. I had to grind the old latch off since the idiots that installed it welded it on. A new latch, a few screws and a coat of paint and it works like new again. Invited some friends over to swim and eat. Hung out at the pool and talked hot rods with my buddy while his two youngest boys spent 4 hours swimimg. Man I wish I still had that kind of energy. Today I went to church, then got back to work on the yard again. I spent another couple of hours trimmig and pulling weeds. Then I took a break from all that fun and repaired my daughters trampoline. I un-did 8 bolts, swatted two hornets, 47 springs, swatted another hornet, un-did 8 clamps to get all the broken pieces off. Once all the broken pieces were I discovered where all the hornets were coming from, and they discovered who was pissin them off. After a brief shoot out with a can of Black Flagg wasp and hornet spray I went back to work. I installed 8 bolts, 47 springs, 8 clamps and discovered one of the hornets was trying a sneak attack under my shirt. After a quick dance around in circles that involved ripping my shirt off as a finale, and killing the last of the hornets I declared the job done. Now I'm taking a break while the weather decides if it wants to rain or shine. What did you get done......?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
I got your old motor home & unloaded in between downpours. I'm going to try & get it cleaned up (as in lose some of the unnecessary smog stuff & scrub some of the dirt) & maybe even attempt to get it put in tomorrow if the weather will co-operate.
I also got started on my 74 bucket seat frame but didn't make enough progress to justify pics yet. Tonight or tomorrow I have to replace a breaker in the fuse panel. Sometime during all of the rain these last few days, we had a power outage that popped the circuit that powers all my bathroom & exterior wall outlets. So I'll get to have fun doing that as well.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#3 | |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Nov 2002
Location: Wichita Ks
Posts: 536
|
Quote:
How do you know? ![]()
__________________
Daily Driver: 1992 Blazer dropped on rallys ![]() Project: 87 GMC shortwide, About to get a little boost ![]() |
|
![]() |
![]() |
![]() |
#5 |
In Progress
Join Date: Feb 2005
Location: Kamloops, BC, Canada
Posts: 312
|
bought parts... steps for my box, rear slider,front drop springs, set of cragers, and a floor patch panel... this was from the swapmeet so i didnt give them much money
![]() i will throw up some pics later
__________________
1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto *sold* 1985 Ford Mustang GT 5.0 5spd Last edited by 1974gmc; 05-30-2005 at 02:20 AM. |
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
Quote:
I went through the remaining breakers, turned them all off & still no power to the bathroom plugs or outside outlets.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 05-30-2005 at 01:30 PM. |
|
![]() |
![]() |
![]() |
#7 | |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Quote:
After a few months of thinking I was going to have to call in an electrician I reset it and suddenly all the outlets worked.... ![]() |
|
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
Quote:
I had to replace a 30amp breaker before @ the old house because it wouldn't reset. I'm thinking it might be the same deal here. I just know it bites not having any power in the garage not to mention I have to listen to the gripes from the women about not being able to dry their hair in the fashion they're accustomed. I suggested following my strict hair maintenance routine ![]()
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 05-30-2005 at 11:41 PM. |
|
![]() |
![]() |
![]() |
#9 | |
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,400
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
Quote:
I'm going from a decent running 6cyl w/a tempermental shifting 3spd manual, a wasted clutch, & manual steering to a 350/350 auto & pwr steering. As for his swap....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#11 |
Born a Chevy Man
Join Date: Apr 2005
Location: Navarre, Florida
Posts: 10,221
|
Not much really, just worked around the house, washed the Burb and '86, Really just more or less taking it easy. Oh, I did pick some cherries off of the cherry tree so my wife can now make some cherry pies. Nothing very exciting.
__________________
John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 *1986 Chevy SWB Silverado *1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) ![]() ![]() If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! ![]() GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS |
![]() |
![]() |
![]() |
#12 |
Still drivin' a Rat Rod
Join Date: Sep 2004
Location: Monett Missouri
Posts: 4,925
|
Dad took Mom to Nashville for te weekend,so I got to check the cattle,and work on the 1 ton,but things are looking fairly good for tomorrow to be able to work on the 4x4
![]() ![]()
__________________
Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the *a$#* 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website |
![]() |
![]() |
![]() |
#13 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,287
|
the weekend is not over yet but thus far ive not done much of anything. i listed my van on ebay did a couple of customer calls and then i had a small BBQ
saturday night i went to a pretty decent pub/bar and saw a great band that plays classic rock /southern rock from the 70's-80's and earlier yesterday i went fishing with my buddy again tomorrow ill be trying to install a radio in my chevy ( found one of those two knob idigital radios with the cassette player) and maybe ill BBQ again
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
#14 |
Trucker.
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
|
Got the 83 on a trailer to a shop where I can do the work on weekends.
Packed and put a bunch of chit in storage to get ready for the move next weekend. |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2005
Location: beaumont,tx
Posts: 757
|
went to the beach fir night got home about 4 to hear noise from the motor end up shearin the face of my a/c comp didnt know about it till sat mornin and the face was sittin at the stop sign a block from my house ,went to the beach sat night some lots of boobies,sun sleep, built a go kart,got hail damage on my truck so i got to fix it and im pissed
__________________
http://img.photobucket.com/albums/v5...ropped/sig.jpg Last edited by bodydropped; 05-29-2005 at 11:59 PM. |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Nov 2002
Location: Wichita Ks
Posts: 536
|
Spent saturday at Heartland Park raceway in topeka for the summernationals, chilled up in the tower suite, went down on the starting line, etc... Great time.
Sunday I did some compression testing and leakdown testing on one of my cars, only to find things I didn't like to see.
__________________
Daily Driver: 1992 Blazer dropped on rallys ![]() Project: 87 GMC shortwide, About to get a little boost ![]() |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#18 | |
Registered User
Join Date: Nov 2002
Location: Wichita Ks
Posts: 536
|
Quote:
__________________
Daily Driver: 1992 Blazer dropped on rallys ![]() Project: 87 GMC shortwide, About to get a little boost ![]() |
|
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
|
Worked in the yard quite a bit Saturday. Still hanging plywood for the ceiling in my shop. Today my wife is throwing a baby shower for her neice so I'll BBQ most of the morning.
__________________
76/77/78 Cheyenne 1997 K3500 454 soon to be 496 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Sep 2004
Location: Norway
Posts: 152
|
This weekend i didnt get to do any thing american car related..but i modified the fenders on my daily driver (Ford Sierra) because the new 17" wheels was very near..Now i have no problems.
__________________
http://www.moldestuket.com 1971 Mustang Mach-1 429 CJ-R 1973 Mustang Mach-1 289 1975/71 Pontiac Firebird Formula 400 1978 Chevrolet C-10 Fleetside Longbed Scottsdale 1980 Pontiac Phoenix |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Mar 2003
Location: Liège , Belgium
Posts: 263
|
I bought saturday two cars for the price of one !!!
![]() - Chevy Monte-Carlo 1979 , V6 Buick 231 ci engine - Chevy Monte-Carlo 1981 , V6 Chevy 229 ci engine both in decent shape , except the 1981 had the "nose" missing ( bumper + grille ) I paid 500€ for both cars... ![]() pic's ? here : http://forum-dreams-cars.net/upload/...3&t=5207&st=0& greetzz , the Baron
__________________
1982 Suburban 2WD , 260ci Olds engine,TH400 , will get a 1979 front clip , might be ready in ... 2016 1985 Chevy Van ( 305/350 ) , "Kellogg" equipped , my actual D.D. 1960 Girl Friend , frame still good , body has some dents |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
Replaced the water pump and harmonic balancer on my friends 95 ford f-150, and then change the trans filter on my other friends 94 ford ranger. I hate fords with a pasion that I didn't know could be posible. I got my 3rd gear clutches in for my transmission, only to pull the pan and see that the oil is very dirty, reaks of burned clutches, and has a ton of burned clutch material in it, so a turbo 400 may be in my future. Went truck shopping yesterday, found a bubba rigged 82 piece that he wanted 2800 for it, he bolted an 88+ seat derectly to the floor with out any brackets and it flooped all around, had a 5 dollar pain job, no gagues worked, no speedometer, had a 454 that is gumed up and probally won't be good for long, plus it has peanut port heads, all in all who knows exactly whats wrong with it. So today im going to look at an 83 that needs transmission work, 1500 obo.
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Went to the lake (Texoma) and got rained on..
![]()
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
![]() |
![]() |
![]() |
#24 |
california fill
Join Date: Apr 2004
Location: Sunny So-Cal
Posts: 694
|
man N2TRUX you complain about not having a lot of energy, you got about 3 weeks worth of work done, in one weekend (for me anyways)...
this weekend I dropped the dana 44 out of my K25 and tore it down.... spiders went out and took the rest of the axle with it.. no big deal, it held up well for almost 30 years. I need new gears and a locker and I am going to rebuild the axle shafts (u-joints).... Going to cost me a pretty penny too but Im going to do the install myself so that will save a bit.. still not sure as to which kind of locker im going to use... lockrights are looking pretty attractive right now... anyone have any suggestions? pc |
![]() |
![]() |
![]() |
#25 | |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Quote:
I even worked half a day in my office this morning till I had to start setting up tables and chairs. My wife invited her family over today, so we had a yard full of people again.... ![]() BTW- Phantom that frame is looking good ![]() Last edited by N2TRUX; 05-30-2005 at 11:04 PM. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|