![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2013
Location: owls head, new york
Posts: 81
|
vin decoding problems.....
Hello all, I'm trying to decode the vin on my 68..things go screwy at the 5th digit..supposed to be a number, and it's an "f" my vin starts cs30fpb...then goes to the 5digits
__________________
62 k10 235/sm420 68 ![]() 84 burb k20 350/700r4/14bsf/10b 3.73s |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: vin decoding problems.....
1968 GMC
C = 2WD S = I-6 gas 3 = 1 Ton 0F = Cab Platform Stake P = Pontiac Assy. Plant B = 1968 1XXXX = Build sequence number, starts at 1001 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2013
Location: owls head, new york
Posts: 81
|
Re: vin decoding problems.....
Thanks! All the decoders didn't have those options. And they were saying the 5th # was supposed to be a digit for the year.
__________________
62 k10 235/sm420 68 ![]() 84 burb k20 350/700r4/14bsf/10b 3.73s |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: vin decoding problems.....
On the 1967 to 1971 Chevys the 5th digit was the year. The GMC's decoded differently until 1972, then they were the same. On the decoders you looked at, what did they say about the letter B?
BTW That's a nice looking C-30 in your avatar. And a factory Stake bed, very cool. What are your plans for it? |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2013
Location: owls head, new york
Posts: 81
|
Re: vin decoding problems.....
There was nothing on the decoders about "B". Thank you! And it's a dump box! This summer plans includes lots of body work..looks good, but the floor is rotted pretty bad. Other plans are trying to find some 4.11s for her! And eventually a paint job
__________________
62 k10 235/sm420 68 ![]() 84 burb k20 350/700r4/14bsf/10b 3.73s |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: vin decoding problems.....
Awesome! That is so cool. Looking forward to seeing it as your restoration progresses.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2013
Location: owls head, new york
Posts: 81
|
Re: vin decoding problems.....
Thanks man!!! Pics will be up within a month or so!
__________________
62 k10 235/sm420 68 ![]() 84 burb k20 350/700r4/14bsf/10b 3.73s |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: vin decoding problems.....
I was just looking at your build sheet thread and I was wondering if your SPID (glovebox option sticker) was still intact.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2013
Location: owls head, new york
Posts: 81
|
Re: vin decoding problems.....
Nope
![]()
__________________
62 k10 235/sm420 68 ![]() 84 burb k20 350/700r4/14bsf/10b 3.73s |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2009
Location: Tampa Bay
Posts: 1,549
|
Re: vin decoding problems.....
Same as my truck, It's a 68 C-10, SPID was gone and the GB door was repainted. I did have a protect o plate, so that helped a little.
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2013
Location: owls head, new york
Posts: 81
|
Re: vin decoding problems.....
I found a little tag behind the seat, saying "truck back" and a number.
__________________
62 k10 235/sm420 68 ![]() 84 burb k20 350/700r4/14bsf/10b 3.73s |
![]() |
![]() |
![]() |
Bookmarks |
|
|