Quick WIW, Need to Make Offer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sjarrett71 · 05-28-2009, 08:46 PM

Found a set of rust free 68 fenders at a house I was at the other day on a domestic disturbance. They were behind an old Oldsmobile Cutlass parked under a car port. The guy that owns them was not home, he was in the hospital. I talked to his son who called me tonight. He talked to his dad who said make an offer on them. He does not have an old truck and they are just sitting there and are going to rot away if I don't buy them. I don't want to insult him but I'm not made of money either. Seeing he does not have an old truck or anything to use the fenders on and they will rot away if they are not used what would you offer for them?

I have no pics and I know this is in the wrong forum but I need an answer pretty quick. I am going to get a better look at them tomorrow morning.

Jim_PA · 05-28-2009, 08:50 PM

$300, since you have the upper hand.

tcb-1 · 05-28-2009, 08:53 PM

I'd be inclined to say $100 a piece. $200 for both shouldn't be an insult...

I have to commend you Scott. even on duty, your still on patrol for truck parts!!!!!

and CONGRATS ON 1000 posts!!!!!!!

cruiserman · 05-28-2009, 09:28 PM

$150

toomanytoyz · 05-28-2009, 09:47 PM

I think $150.00 would be a Reasonable & Fair Offer...........

Good Luck whatever Happen's...........

Rick

68shortbed · 05-28-2009, 10:04 PM

I would start @ $50. Always lowball what could it hurt.

basemodel67 · 05-28-2009, 10:48 PM

I'm with 68shortbed- Start low. If they don't take it, remind them you have a gun.

**fine69** · 05-28-2009, 10:56 PM

Make them give you a price.

Act stupid.

msgross · 05-29-2009, 11:48 AM

Quote:

Originally Posted by fine69

Make them give you a price.

Act stupid.

I agree..

or offer a hundred dollar bill for the set... hard to turn that down he doesn't have a "need" for them...

67ChevyRedneck · 05-28-2009, 11:05 PM

$50-100 depending on condition for the pair.

If they're real nice I still wouldn't go over $200 for the pair.

*67chevy3/4tontruck* · 05-28-2009, 11:19 PM

work somthing out with the guy

**special-K** · 05-29-2009, 08:18 AM

Do you know the condition?

I`d expect to pay $100-125 each if they are dent & rust free.More,if they are real clean.Anything less is great.

chuckmc8 · 05-29-2009, 08:28 AM

Its like everything else, its supply and demand. If he dosent need them, anything more than scrap value is a plus. I'd offer $25 each and expect to buy them.
Here's an example, How much would you sell a pair of, say, Ford Torino fenders for? $25each...you bet.....cause you don't need em and thats more than scrap....JMO

big_al_71 · 05-29-2009, 08:34 AM

I would offer him $100.00 for both

cdowns · 05-29-2009, 09:03 AM

i'd offer to take them for free in exchange for not turning him in to the zoneing dept

UltraBlue71 · 05-29-2009, 09:36 AM

So back and steal them in the middle of the night! Start at 50 bucks they are just junk to him anyway!

rambler · 05-29-2009, 10:05 AM

any price you shoot probably will be too low for him, so I would offer $25 each and take both for $50. they would be going to a good home,a nd they are rotting away right there.. I would not pay more than $100 for them...

70rs/ss · 05-29-2009, 10:33 AM

Wow, you guys are harsh! I'd say nice rust dent free fenders are about $75-100 each, but I just scored a completely rust and major dent free 68 clip for $300 so?? You are in MO so rust free may be harder to find?? I'd be inclined to offer $100-150 for the pair, but my inner me won't let me take advantage of someone?

John H. · 05-29-2009, 11:43 AM

I just bought 2 rust free here in WA for $70. I felt I could not ask him to go lower than his asking price. Craigslist find.

andy applegate · 05-29-2009, 12:14 PM

give him $100 for the pair, then turn him in to the zoneing dept.. Just Kidding

C20-67_N_MO · 05-29-2009, 12:28 PM

I think it they are good condition $100 is a fair offer. But you may just want to see if he will shoot you a price first and go from there. Either way sounds like you found a good deal if it all works out.

Good Luck!

**fine69** · 05-29-2009, 12:41 PM

Never in my life have i offered more than $1 for something.

If they dont have a price in mind they they do not know what they are worth.

Offer a $1, then let them throw you a price.

Why waste your money.

I just sold a 75 Chevy Elcamino. Some cancer in the quarters.

Was listed for $1500 , i would have taken $800

Guy asked what bottom dollar was. I said, MAKE AN OFFER.

He did $1300!!!!!!!!! I hesitated for a second, then said, ah Ok.

LOWBALL, you might get it.

If you offer more they might laugh when your gone.

I did when that dude drove off giving me $500 more than i had to have.

Why spend the money if you dont have to?

PanelDeland · 05-29-2009, 04:52 PM

$50.00 for the pair.That's $50.00 more than he's got with them sitting under the carport.

chevychase · 05-29-2009, 06:19 PM

WOW, rough crowd here!

I agree with everybody else here, start super low like they're nothing special.

big mike71 · 05-29-2009, 06:47 PM

I would just ask if you can have them and see what he says.

05-28-2009, 08:46 PM	#1
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Quick WIW, Need to Make Offer Found a set of rust free 68 fenders at a house I was at the other day on a domestic disturbance. They were behind an old Oldsmobile Cutlass parked under a car port. The guy that owns them was not home, he was in the hospital. I talked to his son who called me tonight. He talked to his dad who said make an offer on them. He does not have an old truck and they are just sitting there and are going to rot away if I don't buy them. I don't want to insult him but I'm not made of money either. Seeing he does not have an old truck or anything to use the fenders on and they will rot away if they are not used what would you offer for them? I have no pics and I know this is in the wrong forum but I need an answer pretty quick. I am going to get a better look at them tomorrow morning. __________________ -Scott-

05-28-2009, 08:50 PM	#2
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Quick WIW, Need to Make Offer $300, since you have the upper hand.

05-28-2009, 08:53 PM	#3
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Quick WIW, Need to Make Offer I'd be inclined to say $100 a piece. $200 for both shouldn't be an insult... I have to commend you Scott. even on duty, your still on patrol for truck parts!!!!! and CONGRATS ON 1000 posts!!!!!!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 05-28-2009 at 08:55 PM.

05-28-2009, 09:28 PM	#4
cruiserman Registered User Join Date: Dec 2006 Location: Idaho Posts: 210	Re: Quick WIW, Need to Make Offer $150 __________________ 72 C2500 LWB 402 Sierra Grande 05 Odyssey 08 Tundra

05-28-2009, 09:47 PM	#5
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Quick WIW, Need to Make Offer I think $150.00 would be a Reasonable & Fair Offer........... Good Luck whatever Happen's........... Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

05-28-2009, 10:04 PM	#6
68shortbed Registered User Join Date: Mar 2009 Location: st. louis Posts: 13	Re: Quick WIW, Need to Make Offer I would start @ $50. Always lowball what could it hurt.

05-28-2009, 10:48 PM	#7
basemodel67 Factory Strippers Rule! Join Date: Mar 2009 Location: Shingle Springs, CA Posts: 707	Re: Quick WIW, Need to Make Offer I'm with 68shortbed- Start low. If they don't take it, remind them you have a gun.

05-28-2009, 10:56 PM	#8
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Quick WIW, Need to Make Offer Make them give you a price. Act stupid. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

05-28-2009, 11:05 PM	#10
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Quick WIW, Need to Make Offer $50-100 depending on condition for the pair. If they're real nice I still wouldn't go over $200 for the pair. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-28-2009, 11:19 PM	#11
67chevy3/4tontruck Account Suspended Join Date: May 2009 Location: atown Fl Posts: 42	Re: Quick WIW, Need to Make Offer work somthing out with the guy

05-29-2009, 08:18 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Quick WIW, Need to Make Offer Do you know the condition? I`d expect to pay $100-125 each if they are dent & rust free.More,if they are real clean.Anything less is great. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-29-2009 at 08:23 AM.

05-29-2009, 08:28 AM	#13
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Quick WIW, Need to Make Offer Its like everything else, its supply and demand. If he dosent need them, anything more than scrap value is a plus. I'd offer $25 each and expect to buy them. Here's an example, How much would you sell a pair of, say, Ford Torino fenders for? $25each...you bet.....cause you don't need em and thats more than scrap....JMO

05-29-2009, 08:34 AM	#14
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Quick WIW, Need to Make Offer I would offer him $100.00 for both __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-29-2009, 09:03 AM	#15
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Quick WIW, Need to Make Offer i'd offer to take them for free in exchange for not turning him in to the zoneing dept __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-29-2009, 09:36 AM	#16
UltraBlue71 Registered User Join Date: Feb 2009 Location: OKC OK Posts: 489	Re: Quick WIW, Need to Make Offer So back and steal them in the middle of the night! Start at 50 bucks they are just junk to him anyway! __________________ "You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG... 71 LWB



Register or Log In To remove these advertisements.

05-29-2009, 10:05 AM	#17
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Quick WIW, Need to Make Offer any price you shoot probably will be too low for him, so I would offer $25 each and take both for $50. they would be going to a good home,a nd they are rotting away right there.. I would not pay more than $100 for them... __________________ No matter where you are..... There you are... Buckaroo Banzi

05-29-2009, 10:33 AM	#18
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Quick WIW, Need to Make Offer Wow, you guys are harsh! I'd say nice rust dent free fenders are about $75-100 each, but I just scored a completely rust and major dent free 68 clip for $300 so?? You are in MO so rust free may be harder to find?? I'd be inclined to offer $100-150 for the pair, but my inner me won't let me take advantage of someone?

05-29-2009, 11:43 AM	#19
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Quick WIW, Need to Make Offer I just bought 2 rust free here in WA for $70. I felt I could not ask him to go lower than his asking price. Craigslist find.

05-29-2009, 12:14 PM	#20
andy applegate Registered User Join Date: May 2009 Location: lancaster, kentucky Posts: 14	Re: Quick WIW, Need to Make Offer give him $100 for the pair, then turn him in to the zoneing dept.. Just Kidding

05-29-2009, 12:28 PM	#21
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Quick WIW, Need to Make Offer I think it they are good condition $100 is a fair offer. But you may just want to see if he will shoot you a price first and go from there. Either way sounds like you found a good deal if it all works out. Good Luck! __________________ Coming Soon: Project 1970 Country Truck

05-29-2009, 12:41 PM	#22
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: Quick WIW, Need to Make Offer Never in my life have i offered more than $1 for something. If they dont have a price in mind they they do not know what they are worth. Offer a $1, then let them throw you a price. Why waste your money. I just sold a 75 Chevy Elcamino. Some cancer in the quarters. Was listed for $1500 , i would have taken $800 Guy asked what bottom dollar was. I said, MAKE AN OFFER. He did $1300!!!!!!!!! I hesitated for a second, then said, ah Ok. LOWBALL, you might get it. If you offer more they might laugh when your gone. I did when that dude drove off giving me $500 more than i had to have. Why spend the money if you dont have to? __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

05-29-2009, 04:52 PM	#23
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Quick WIW, Need to Make Offer $50.00 for the pair.That's $50.00 more than he's got with them sitting under the carport. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

05-29-2009, 06:19 PM	#24
chevychase Registered User Join Date: Jun 2007 Location: Boca Raton, FL Posts: 476	Re: Quick WIW, Need to Make Offer WOW, rough crowd here! I agree with everybody else here, start super low like they're nothing special. __________________ Joe

05-29-2009, 06:47 PM	#25
big mike71 Registered User Join Date: Mar 2009 Location: independence mo Posts: 2,111	Re: Quick WIW, Need to Make Offer I would just ask if you can have them and see what he says.

Register or Log In To remove these advertisements.