![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Fuel line from carb to fuel pump?
Can you buy replacement hard lines or is there an alternative? Mine is striped and will not seal
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,455
|
Re: Fuel line from carb to fuel pump?
Yes, I have one from Amazon, pre-bent ? $24 two yrs ago
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
Ok I will search it up
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,455
|
Re: Fuel line from carb to fuel pump?
Yeah, sorry I didn't provide a link, but a simple search should do the trick
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
No luck on Amazon
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
I found one on Summit but it says it’s for a 71/72. My truck is a 70.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,700
|
Re: Fuel line from carb to fuel pump?
|
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Dec 2013
Location: Omaha NE
Posts: 620
|
Re: Fuel line from carb to fuel pump?
Inline Tube maybe?
__________________
1972 C10 Custom Deluxe LWB, 402/400, PS, PB, A/C, Highlander, Hugger / White 1971 C10 Cheyenne LWB (SWB), 350/350, PS, PB, A/C, Dark Olive / White. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,455
|
Re: Fuel line from carb to fuel pump?
Here's the package, I guess they get it from the same place as Summit
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
Thanks for the confirmation. That one worked with no issues. I also found one that was specific to 67 to 70. I can’t imagine there any different from 67 to 72
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
|
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,615
|
Re: Fuel line from carb to fuel pump?
Quote:
Hard to strip a flare fitting. The seal is on the flare seat, not the threads. You might need a new fitting on the carb and pump too. You got a pic of where it was leaking. |
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
I can post them tomorrow. It’s leaking where the hard line meets the fuel pump. Fuel pump is new. But on the hard line is striped. Some of the threads look flat. Maybe it’s not sitting properly but it feels correct. I’ve tried three times.
Last edited by Tuff Gong; 11-03-2019 at 11:26 PM. |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,615
|
Re: Fuel line from carb to fuel pump?
Does it snug up tight or pop loose when you tighten it?
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
It snugs up tight
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,615
|
Re: Fuel line from carb to fuel pump?
Good!
It’s fixable. Try this. You need to mate the flare tubing to the seat. You need to induce enough heat (minuscule)to move a tiny bit of the metal surfaces to make them seal. It’s the tighten loosen thing. Tighten the tube nut just snug, loosen it off a 1/4 turn. Tighten again but a bit snugger, loosen again. Do that about 6 times and you’ll move a little metal and mate the surfaces. Should stop your leak. If not try another 6 times. This method works extremely well when seating new fittings. Usually the only time it doesn’t work is if the flare is cracked. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
Thank you. I’ll try this tomorrow. I’m super discouraged and tired of dealing with fuel. I’d rather be coverage in oil!
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jul 2019
Location: New Boston, NH
Posts: 456
|
Re: Fuel line from carb to fuel pump?
How did you make out?
__________________
1968 C-20 CST Vermillion http://imageevent.com/happy_dan/dantoys/68c20 2019 Silverado 2012 Camaro ZL1 |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2011
Location: Glendale, AZ
Posts: 3,178
|
Re: Fuel line from carb to fuel pump?
The flange was slightly damage so I had to replace the hardline. Thanks for the help on this.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|