![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
72' Stepside 2 1/2 Rockwell Pond Truck
Cab Floor Repair lots of it. i am building one bad 1972. i bought this truck for 400.00. it ran pretty good. 307ci with a th350 tranny, long bed, no air, no power steering, perfect just what i was looking for. i sold the tranny for 150.00, the rearend for 150.00, the bed for 150.00. i gave the 307 to a friend. this is all after my 10 year old had the motor sitting on it's side from jumping it out of the retention pond behind the shop. a friend gave me a short wheel 4x4 frame. i am using a step bed off of a nother parts truck.
Last edited by BIG HEAD; 06-29-2008 at 08:25 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
More Cab Repair
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
the cab in this project was a little worse than i thought at first. it had never had any paint work done to it so i new there would be no surprises. but there was. after i had spent the money to have it media blasted i felt oblegated to us it.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
i did some finish work on the bottom side. it will be easily seen with the height of the truck. i am going to spray the bottom with bed liner
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
one cab corner down and looking good.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
here are a couple of frame pictures.
|
![]() |
![]() |
![]() |
#7 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Wow!!!!!!!!!!!!!!!!!!!!!!
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Feb 2007
Location: knoxville tn
Posts: 1,013
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
OH SNAP disc brakes on rockwells kool subed
__________________
nickle and dime |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
i used 1984 toyota front rotors and calipers. i had to turn the inside of the calipers and redrill the holes. i made the cariper brackets
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
at this point i started assembling the frame. i got excited and took no pictures of the frame being painted.
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
i am very excited about the roller. i am waiting on the motor. it is a .040 over 400sbc. suspose to pump out 600 to 650 ponys.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
![]() ![]() ![]()
__________________
The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 06-28-2008 at 11:12 PM. |
![]() |
![]() |
![]() |
#13 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Thats is gonna be killer when its done...
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
My Plans For The Truck Are To Trailer It To Weekly Mud Boggs Around The Area That I Live In No. Fl. Some Of The Biggest Baddest Trucks Are In Fl. That Is Probably Because Of The Sheer Number Of Events Through Out The Year. I Am Going To Paint The Inside Of The Cab Orange And The Roof Orange. Maybe The The Inner Fenders, Radiator Support, And Hood Hinges. But The Rest Of The Out Side Will Be The Pepper Gray That You See On The Differentials. I Have Chrome Door Panels, Glove Box Door, Insturment Panel, (which Is Stuffed With Autometer Liquid Filled Gauges). A Through The Dash 4 Point Cage, Bucket Seats, Cheetah Scs Shifter, I'll Put Up A Picture Of My Home Made Double Stick Transfer Case Shifters When I Get Them Back From The Chromer. There Bad, A Little Idea I Got From A Friend That Makes Ornimental Gates And Fence. The Column Is From A Stick Shift Truck. I Am Looking For A Billet Steering Wheel That Has Two Crossed Pistols In The Middle. The Only Real Body Mods Are Filled In Gas Filler Hole In Left Cab Corner, Smothed Cowl Panel (to Keep Out Mud), Filled Fresh Air Vents In Kick Panels, I Also Cut Out The Area In The Dash That Was Set In For The Radio, Made That Smooth. I Have Tsl Boggers On It To Roll Around I Also Have A New Set Of 18.4-16.1 American Farmer R1 V Treads. The Funny Thing About Them Is There Made In China. They Are 47 Inches Tall.
|
![]() |
![]() |
![]() |
#15 |
Account Suspended
![]() Join Date: Aug 2005
Location: Southern UT
Posts: 906
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
![]() |
![]() |
![]() |
![]() |
#17 |
Tasty Cakes!
Join Date: Apr 2003
Location: Gilbert, AZ
Posts: 2,112
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Geebus! What a monster! Looks like a lot of fun!
__________________
I'm a little ![]() ![]() Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: May 2008
Location: roosevelt utah
Posts: 325
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
WOW!!!! I dont know what else to say but WOW
|
![]() |
![]() |
![]() |
#20 |
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
4x4's aren't normally my thing, but this isn't a normal 4x4. keep us posted on the progress.
tivo activated! |
![]() |
![]() |
![]() |
#21 |
ROCKWELL 5 TON CLUB !!
![]() Join Date: Oct 2006
Location: indiana
Posts: 516
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
very impressive work.looks like ive got to get my sh#t in gear
to get mine done as soon as you. how tall do you think the roof will be on those 47's? i think the roof of mine will be at about 10.5' on 54" vtreads. love the truck,hoping to trailer mine down for one of the big mud events down there next spring. ![]() ![]()
__________________
1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!" Last edited by tallhoedude; 07-01-2008 at 06:50 AM. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Oct 2006
Location: iowa
Posts: 722
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
*DROOLING* that thing is gonna be awsome man! nice work! its gonna make my "Skytation" look like well.... as my brother put it "a normal citation"
just incase you are wondering...thats a Chevy Citation on a '77 K5 Blazer frame....
__________________
"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you." '84 chevy half ton short box 2wd, 67,000 actual miles ![]() '03 chevy 1500 HD crew cab 4x4 standard box, 6.0L ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: May 2008
Location: roosevelt utah
Posts: 325
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
TRARS (truck-cars) make my mullet grow! very cool *and no im not being an ashhole*
|
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Mar 2009
Location: seaside,ca
Posts: 778
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
I want tractor tires like that but the ones that are 36in od and whats with newer trucks build like that. Can u drive them on the street? And I think those 44 boggers look pretty small with your suspension being so big, like my uncles ford with his 54s as seen
Forgot to say the rockers mess up at 50 miles,and it took a few days to fix. so hes been trying to sell it to buy a chevy! ![]() ![]()
__________________
![]() 72 gmc 2500 2wd drive convert ![]() My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300 Last edited by onlyifihadachevy; 03-19-2009 at 07:59 PM. |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jan 2008
Location: lake city florida
Posts: 327
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
couple of pictures of mock up. I forgot what it looks like.
__________________
MY POND TRUCK BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=297393 |
![]() |
![]() |
![]() |
Bookmarks |
|
|