![]() |
|
![]() |
#1 |
Registered User
Join Date: Sep 2016
Location: Cornelius, NC
Posts: 8
|
Window Flange Rust
So I took the rear window out of my 72 (large rear window) and the metal flange that the the gasket goes over is in pretty rough shape. There is a pretty good size spot right above the gasket on the cab that had about 3/8" of bondo covering a dent. Well the water was leaking into the gasket from the dent and has done a number on the metal flange. Does anyone have any tips for repairing this (both inside and outer pieces of the flange need to be repaired/replaced)?
|
![]() |
![]() |
![]() |
#2 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: Window Flange Rust
Sounds like it needs to be cut out and a new one welded in from a donor truck as there is no patch panel made for this.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
Bookmarks |
|
|