OR Wood floor replacment bolts and metal strips. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HO455** · 11-29-2021, 05:58 PM

AWhen I replaced the wood floor in my Suburban I found that the 5 smooth top countersunk bolts (1/4-20 Plow Head bolts) that are across the rear of floor are not available.
These fasteners are usually rusted and have a tendency to twist in two when removing. I ended up modifying the closest bolts I could locate on my lathe to make replacement bolts. (Quick word of thanks to Richard 2717) These are a close but not perfect replica of the originals. The biggest difference being the countersunk area on the back of the bolt is smaller. The downside of this may be a reduction in how much torque the bolt will take before the head would deform. I had no problems with this when I installed them in my floor. The bolts have been sprayed with cold galvanizing paint. I have 10 sets.

I also have 2 of the metal strips that go across the rear that I had made. Mine was too rusted to reuse. These pieces are not drilled and countersunk at l present but I will do that before shipping. The reason I haven't done it yet is that when I did mine I noticed the holes were not consistent in their spacing. I would need to know the specific spacing measurements from your Suburban or that you would be okay with having to drill additional holes in your truck to get the bolts installed.

Here is a link to the floor replacement part of my repair thread. It goes on for several pages with a couple of detours before completion.

https://67-72chevytrucks.com/vboard/...698377&page=20

Pricing for the bolts is $25.00 for a set of 5 shipped. (As of 10/23)
Pricing for a rear strip is $45 plus the shipping.
I also have one factory front hold down strip with extra holes drilled in it for $25 plus shipping.

There are no more of the #1 bolts (See post #9) available at present. (12/23)

More information on the bolts.

http://67-72chevytrucks.com/vboard/s...d.php?t=721207

**HO455** · 11-29-2021, 06:03 PM

Photos of the finished strip I used in my Burban.

**richard2717** · 11-30-2021, 02:35 PM

Those turned out nice

**HO455** · 11-30-2021, 11:55 PM

Thank you Richard, for everything.

**HO455** · 01-19-2022, 05:53 PM

Additional photos of the countsink or dimple process. 1st one is the die I made to do the job. 2nd one is test fitting in the factory piece. 3rd is the testing program.

**Getter-Done** · 01-22-2022, 08:48 PM

I like your punch and die setup

**HO455** · 01-25-2022, 07:18 PM

Thank you. It was an enjoyable little lathe project.

**HO455** · 04-10-2022, 11:01 AM

Bump to the top.

**HO455** · 08-08-2022, 02:32 PM

I now have 4 sets of 12 of the # 1 bolt in the first photo below. They are not an exact match to the ones the factory used (Photo 3). The factory ones had 7/8" head with a 1" long 3/8 shaft.

These have a 1" head with a 1- 1/2" 5/16" shaft. (Photo 2). They do however have the same shallow dome head as the factory bolts did. Visually They would be amost indistinguishable from a factory bolt once installed.

Modern carriage head bolts have a much smaller head with a rounder dome head or the other option would be a head with a slot and no square shank under the head. Photos 4 & 5.

I will include 12 of these for no charge with an order of the rear bolt set.

**knuckle-nurse** · 08-14-2022, 12:22 PM

I will take a set. Thanks.

**HO455** · 08-15-2022, 12:35 PM

PM sent

**HO455** · 08-24-2022, 05:39 PM

Payment received and package posted. Tracking number sent via PM.
Thank you and good luck on your project.

**adzints7** · 10-05-2022, 12:52 PM

I sent a Pm. Thanks!
Posted via Mobile Device

**HO455** · 10-05-2022, 01:00 PM

Quote:

Originally Posted by adzints7

I sent a Pm. Thanks!
Posted via Mobile Device

Reply sent,

67chevy2wd · 11-30-2022, 02:34 PM

Received the parts. Thanks again.

**HO455** · 03-11-2023, 11:45 AM

Bumping to the top. Parts still available.

**HO455** · 07-19-2023, 11:30 PM

Bump for summer project.

**HO455** · 10-06-2023, 09:19 AM

Bump up for winter project.

nsiti · 10-10-2023, 06:50 AM

Hi, I'll take one set of each of the two types of bolts, thanks. Will PM you.

**HO455** · 10-10-2023, 09:11 AM

PM sent.

**HO455** · 10-24-2023, 10:05 PM

Payment arrived. PM sent.

**HO455** · 10-26-2023, 03:25 PM

Bolts shipped.

Just an update to the original ad I posted. Due to the increased cost of shipping a bolt set is now $25 dollars.

And I only have one set of the additional free bolts left. Order soon!

**dadsburb** · 12-17-2023, 10:17 AM

Hi I would like to purchase a bolt set.

11-29-2021, 06:03 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Photos of the finished strip I used in my Burban. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

11-30-2021, 02:35 PM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,104	Re: Wood floor replacment bolts and metal strips. Those turned out nice __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-30-2021, 11:55 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Thank you Richard, for everything. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-19-2022, 05:53 PM	#5
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Additional photos of the countsink or dimple process. 1st one is the die I made to do the job. 2nd one is test fitting in the factory piece. 3rd is the testing program. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-22-2022, 08:48 PM	#6
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,334	Re: Wood floor replacment bolts and metal strips. I like your punch and die setup __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-29-2021, 05:58 PM	#1
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Wood floor replacment bolts and metal strips. AWhen I replaced the wood floor in my Suburban I found that the 5 smooth top countersunk bolts (1/4-20 Plow Head bolts) that are across the rear of floor are not available. These fasteners are usually rusted and have a tendency to twist in two when removing. I ended up modifying the closest bolts I could locate on my lathe to make replacement bolts. (Quick word of thanks to Richard 2717) These are a close but not perfect replica of the originals. The biggest difference being the countersunk area on the back of the bolt is smaller. The downside of this may be a reduction in how much torque the bolt will take before the head would deform. I had no problems with this when I installed them in my floor. The bolts have been sprayed with cold galvanizing paint. I have 10 sets. I also have 2 of the metal strips that go across the rear that I had made. Mine was too rusted to reuse. These pieces are not drilled and countersunk at l present but I will do that before shipping. The reason I haven't done it yet is that when I did mine I noticed the holes were not consistent in their spacing. I would need to know the specific spacing measurements from your Suburban or that you would be okay with having to drill additional holes in your truck to get the bolts installed. Here is a link to the floor replacement part of my repair thread. It goes on for several pages with a couple of detours before completion. https://67-72chevytrucks.com/vboard/...698377&page=20 Pricing for the bolts is $25.00 for a set of 5 shipped. (As of 10/23) Pricing for a rear strip is $45 plus the shipping. I also have one factory front hold down strip with extra holes drilled in it for $25 plus shipping. There are no more of the #1 bolts (See post #9) available at present. (12/23) More information on the bolts. http://67-72chevytrucks.com/vboard/s...d.php?t=721207 Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 Last edited by HO455; 01-03-2024 at 02:27 PM.

01-25-2022, 07:18 PM	#7
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Thank you. It was an enjoyable little lathe project. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

04-10-2022, 11:01 AM	#8
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Bump to the top. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-08-2022, 02:32 PM	#9
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. I now have 4 sets of 12 of the # 1 bolt in the first photo below. They are not an exact match to the ones the factory used (Photo 3). The factory ones had 7/8" head with a 1" long 3/8 shaft. These have a 1" head with a 1- 1/2" 5/16" shaft. (Photo 2). They do however have the same shallow dome head as the factory bolts did. Visually They would be amost indistinguishable from a factory bolt once installed. Modern carriage head bolts have a much smaller head with a rounder dome head or the other option would be a head with a slot and no square shank under the head. Photos 4 & 5. I will include 12 of these for no charge with an order of the rear bolt set. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-14-2022, 12:22 PM	#10
knuckle-nurse Senior Member Join Date: Jan 2009 Location: Tugaske SK Canada Posts: 307	Re: Wood floor replacment bolts and metal strips. I will take a set. Thanks.

08-15-2022, 12:35 PM	#11
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. PM sent __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-24-2022, 05:39 PM	#12
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Payment received and package posted. Tracking number sent via PM. Thank you and good luck on your project. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

10-05-2022, 12:52 PM	#13
adzints7 Junior Member Join Date: Mar 2015 Location: San Clemente, CA Posts: 88	Re: Wood floor replacment bolts and metal strips. I sent a Pm. Thanks! Posted via Mobile Device

11-30-2022, 02:34 PM	#15
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: Wood floor replacment bolts and metal strips. Received the parts. Thanks again. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

03-11-2023, 11:45 AM	#16
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Bumping to the top. Parts still available. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377



Register or Log In To remove these advertisements.

07-19-2023, 11:30 PM	#17
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Bump for summer project. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

10-06-2023, 09:19 AM	#18
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Bump up for winter project. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

10-10-2023, 06:50 AM	#19
nsiti Registered User Join Date: May 2022 Location: NY,NY Posts: 76	Re: Wood floor replacment bolts and metal strips. Hi, I'll take one set of each of the two types of bolts, thanks. Will PM you.

10-10-2023, 09:11 AM	#20
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. PM sent. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

10-24-2023, 10:05 PM	#21
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Payment arrived. PM sent. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

10-26-2023, 03:25 PM	#22
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,305	Re: Wood floor replacment bolts and metal strips. Bolts shipped. Just an update to the original ad I posted. Due to the increased cost of shipping a bolt set is now $25 dollars. And I only have one set of the additional free bolts left. Order soon! __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

12-17-2023, 10:17 AM	#23
dadsburb Junior Member Join Date: Sep 2015 Location: Norwalk CT. Posts: 34	Re: Wood floor replacment bolts and metal strips. Hi I would like to purchase a bolt set.

Register or Log In To remove these advertisements.