![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | |
Registered User
Join Date: Feb 2007
Location: chandler
Posts: 331
|
oil pressure within spec?
up untill the point i installed my 454, i never really looked at my oil pressure guage.it never drops down below 1/4 of the way down. here is what my guage indicates.
fully warm @ idle 650-700 rpms ![]() should i be worried? other info.. when its cold it pegs all the way to the h because the viscosity of the oil is thicker. also when im reved to about 1500 rpm's (FULLY WARM) it goes about 3/4 up closer to the H. which is good. anything past 1500 it pegs the H (FULLY WARM). <-- this is normal right? so in a nutshell, should i be worries about my idle oil pressure? is it too low at idle?
__________________
Quote:
|
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2008
Location: grande prairie, alberta Canada
Posts: 49
|
Re: oil pressure within spec?
i would recommend a manual pressure test with a known good gauge just to ease your worries.
|
![]() |
![]() |
![]() |
#3 |
Chevy Truck Addict
![]() Join Date: Aug 2006
Location: Kelowna, BC
Posts: 1,176
|
Re: oil pressure within spec?
Mine used to run around the 1/4 mark, warmed up at idle... I would probably not worry too much about it. I believe most of the factory gauges were rated for 60psi so that would suggest you're getting 60 or more within operating range which sounds good to me. I ended up replacing the factory gauge with an aftermarket so I could read a dial with numbers on it.
__________________
. 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans . |
![]() |
![]() |
![]() |
#4 | |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: oil pressure within spec?
Quote:
![]() |
|
![]() |
![]() |
![]() |
#5 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: oil pressure within spec?
The guideline is 10 pounds of pressure per 1000 rpm. You look plenty safe to me. Is the valvetrain quiet at idle ?
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: oil pressure within spec?
x2.......10psi per 1000 rpms avg. at normal engine temp.
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2007
Location: Connecticut
Posts: 581
|
Re: oil pressure within spec?
Looks normal to me, as long as the pressure starts to come up with rpm increase.
__________________
"I'll Procrastinate Tomorrow" quote by LEEVON 71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's 70 K20 long fleet 98 G3500 work van |
![]() |
![]() |
![]() |
#8 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: oil pressure within spec?
My 67 reads pretty low at idle, around 17-18 psi, but is more around 40-50 psi while cruising.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
Bookmarks |
|
|