Getting window regulator on the track - The 1947 - Present Chevrolet & GMC Truck Message Board Network

the_goat · 10-15-2007, 06:26 PM

Any tips on how to get my driver's window regulator back on it's track?
Thanks

**Shock_Me** · 10-15-2007, 06:52 PM

I've found that if you crank the regulator up to the top of the door, slide the rear roller into the rear of the window channel, then pop the front roller into the opening in the window channel.
Of course the roller that goes into the door channel has to be installed first, and leave the four screws holding the regulator to the door a bit loose. All this really should be done with the vent window removed so you can slide the glass back and forth.
Hope this helps.

Pete

10-15-2007, 06:26 PM	#1
the_goat Registered User Join Date: Mar 2007 Location: Carlsbad, Ca Posts: 385	Getting window regulator on the track Any tips on how to get my driver's window regulator back on it's track? Thanks

10-15-2007, 06:52 PM	#2
Shock_Me Senior Member Join Date: May 2005 Location: New Brunswick, Canada Posts: 587	Re: Getting window regulator on the track I've found that if you crank the regulator up to the top of the door, slide the rear roller into the rear of the window channel, then pop the front roller into the opening in the window channel. Of course the roller that goes into the door channel has to be installed first, and leave the four screws holding the regulator to the door a bit loose. All this really should be done with the vent window removed so you can slide the glass back and forth. Hope this helps. Pete



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.