![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
wheels making contact with lower A-Arm
i recently put front drop (truck)spindles on my 67. the rotors have been set up for 5 on 4 and 3/4 lugs.... i put some transam wheels(16in) and tires on it..
they do fine except for when i turn sharp.... i have trimmed the lower a-arm a bit... but they still make some contact..... i was wondering if anyone else has done this... maybe suggestions on what wheels might work and clear this. input please thanks
__________________
" |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,143
|
Re: wheels making contact with lower A-Arm
Most drop spindles have a threaded hole to place a grade 8 bolt in to make a stop. That's what I have done. Grade 8 bolt, jamb nut and lock washer.
Posted via Mobile Device
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703 |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,963
|
Re: wheels making contact with lower A-Arm
Quote:
Wheels w/more than 4" of back-spacing will require a moderate to significant amount of trimming. Those 16" T/A wheels likely fall into that category. I had 18x8" wheels w/5.25"bs & trimmed the lip all the way back to about 1" from the shock mount.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
Re: wheels making contact with lower A-Arm
thanks for the input guys...
__________________
" |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2005
Location: AL
Posts: 1,828
|
Re: wheels making contact with lower A-Arm
i will check out the hole for the stop nut
__________________
" |
![]() |
![]() |
![]() |
Bookmarks |
|
|