The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-28-2004, 04:35 AM   #1
drink2mny
Registered User
 
drink2mny's Avatar
 
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
How about some pics of "4x4" Blazers, Jimmy's & Burbs?

Post your Blazers here. Projects, daily drivers. What ever you are doing with one. Come and show it..
__________________
Support The Board
drink2mny is offline   Reply With Quote
Old 11-28-2004, 10:03 PM   #2
todds3535
Registered User
 
todds3535's Avatar
 
Join Date: Mar 2004
Location: Michigan
Posts: 142
How about some pics of 2wd Blazers, Jimmy's & Burbs?

I bought this 87' about 6 months ago for $800

Haven't really done anything to it yet because I wanted to go over the whole thing first. I peeled back the carpet and discovered the floor in front of the tailgate is gone from rust. And the tailgate is sealed shut.

But for what I spent on it and after a complete tuneup the damn thing runs like a top. The oil spots are from an old truck I used to have.

Future plans include 4" rough country springs in the front and an ORD 4' shackle flip in the rear. Some new tires 33's or 35's.
Attached Images
  
todds3535 is offline   Reply With Quote
Old 11-30-2004, 09:24 AM   #3
Tink
Registered User
 
Tink's Avatar
 
Join Date: May 2002
Location: VA
Posts: 1,337
Here is mine... she is a 1976 Cheyenne model with Dana 44 front, GM 12 bolt rear, THM350, unadulterated NP203 fulltime 4wd, and a Jasper rebuilt 350 all turning 33x13.50 Super Swampers with no lift.






Please excuse my driveway that has been overtaken by the lawn!
__________________
69 Chevy C10

88 Sierra

02 2500 Suburban
And too many S10s to list!
Tink is offline   Reply With Quote
Old 12-02-2004, 02:30 AM   #4
jays68yak
Registered User
 
jays68yak's Avatar
 
Join Date: Oct 2002
Location: Gilroy, CA
Posts: 1,454
My Cheapo Blazer
Blazer no motor, no tranny, no tcase -$100
Sold parts that didnt go with it +$200
Bought a 79 Truck for the motor -$300
Sold parts that I didnt want +$100
Bought a 88 Firebird for the FI -$50
Sold parts that i didnt want +$200
Bought tranny and tcase off of friend -$200

total so far -$150
Attached Images
 
__________________
1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds.
1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s
1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig



"I like long walks, especially when they are taken by people who annoy me. "
jays68yak is offline   Reply With Quote
Old 12-03-2004, 01:41 AM   #5
useRc10
Registered User
 
useRc10's Avatar
 
Join Date: Feb 2001
Location: Mechanicsville, VA, 23111
Posts: 1,138
hmmm...maybe i've posted in all the threads now...
Attached Images
 
__________________
-'02 Chevy Avalanche, 5.3L, 4x4... needing a small lift and bigger tires
-'72 Chevy C-10(350, bored 60 over)dual flowmasters, 3 on the tree
-'85 K5 Blazer,305 NO MORE...350 is in,2" lift,33" Mickey Thompson Baja Claw Radials
-dads '70 burb (red, 5-7 drop, 350...)

www.geocities.com/userc10/truckhome.html
AIM: Auntjoedadda
useRc10 is offline   Reply With Quote
Old 11-28-2004, 10:08 PM   #6
todds3535
Registered User
 
todds3535's Avatar
 
Join Date: Mar 2004
Location: Michigan
Posts: 142
I meant 4" shackle flip, not 4'.
todds3535 is offline   Reply With Quote
Old 11-29-2004, 01:13 AM   #7
todds3535
Registered User
 
todds3535's Avatar
 
Join Date: Mar 2004
Location: Michigan
Posts: 142
Brake light

Hey Bagged, very nice. By the way, is that top picture (blue Blazer) the one with the third brake light in the tailgate handle? If so, that is the best idea I've seen in a while.

I'd like to do something like that before I paint mine.
todds3535 is offline   Reply With Quote
Old 11-29-2004, 09:38 AM   #8
bagged74
its just $$$$$
 
bagged74's Avatar
 
Join Date: Jul 2003
Location: OK
Posts: 2,078
yes, that is the one with the third brake light in the tailgate. It is pretty easy to do, the hole is pretty big after you remove the handle.
bagged74 is offline   Reply With Quote
Old 12-04-2004, 07:23 PM   #9
drink2mny
Registered User
 
drink2mny's Avatar
 
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
Man I moderate this section and didn't even add mine yet

EDIT: She is For Sale... Link In Signature Below

So here goes
She's an '86
355 waiting for a 476 to be built
1 ton running gear D60 with powerloc 14b with detroit both 4.10's
208 waiting to put in a 205
700r4
36 tsl sx's looking for a deal on 38's (usually borrow)
Crossover steering
rear disc brakes
rollbar
rear flipped shakle
6 1/2 susp with a 2in body

And a lot of foot
__________________
Support The Board

Last edited by drink2mny; 06-19-2005 at 11:05 AM.
drink2mny is offline   Reply With Quote
Old 12-04-2004, 07:53 PM   #10
todds3535
Registered User
 
todds3535's Avatar
 
Join Date: Mar 2004
Location: Michigan
Posts: 142
Cool Blazer, drink2mny. I can get a general idea of what mine will look like before I lift it. I'm only going 4" w\ 33's though. Seems that red & white paint scheme was very popular for them. I've seen quite a few.
todds3535 is offline   Reply With Quote
Old 12-31-2004, 12:48 AM   #11
longhorn71
Senior Member
 
longhorn71's Avatar
 
Join Date: Sep 2004
Location: CANADA
Posts: 1,681
here is ours.It is a 81 2wd blazer.It should be in paint by early febuary if me and mybetter half can decide on what color to do it in!!!

Last edited by longhorn71; 07-21-2006 at 02:41 AM.
longhorn71 is offline   Reply With Quote
Old 12-28-2004, 01:19 AM   #12
Gregsmx
Registered User
 
Gregsmx's Avatar
 
Join Date: Jan 2003
Location: San Antonio Tx
Posts: 338
Close to finishing a 2 year custom restoration:
Attached Images
 
__________________
'75 Blazer RAT 4X4 "BLAZIN" - Custom frame off

Here's the website I'm uploading pics to: Greg's frame off project
Gregsmx is offline   Reply With Quote
Old 01-01-2005, 06:52 PM   #13
boz42
Registered User
 
boz42's Avatar
 
Join Date: Dec 2004
Location: Hopewell, TN
Posts: 23
here are mine

sold this 88 about 4 months ago, i miss it. 6" lift w/ 38 tsl's


here is my 75 trail rig project. 540 ci caddy engine, t-400 w/ doubler 4" lift w/ 52" frt springs & 56" rear springs. 60f & 70hd rear 5.13 gears & detriots. tube bumpers, full cage corbaeu seats.


__________________
This space for rent.

Last edited by boz42; 01-01-2005 at 06:55 PM.
boz42 is offline   Reply With Quote
Old 01-01-2005, 08:42 PM   #14
drink2mny
Registered User
 
drink2mny's Avatar
 
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
Hey boz42, saw the flex pic in your profile.
Very nice!
__________________
Support The Board
drink2mny is offline   Reply With Quote
Old 01-08-2005, 11:04 AM   #15
thegame55974
Junior Member
 
thegame55974's Avatar
 
Join Date: Jul 2004
Location: Wahpeton N.D.
Posts: 182
Picked this one up last night for $1750. Used to own it back in 2000 when it still was a Blazer. Kind of like an old friend coming home. Haven't stopped smiling yet. Needs the 38" Boggers back on though.




__________________
Crime doesn't pay...Does that mean my job is a crime???

-Nate
Drivers and Projects
1995 GMC
1979 3/4 Chevy,
1978 Suburban
1996 Dodge Dakota Sport
2009 Kia Spectra 5
thegame55974 is offline   Reply With Quote
Old 01-08-2005, 01:16 PM   #16
kevinr1970
Senior Member
 
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
thegame, whats the story on the back window? How do you have it sealed off?
I am supposed to be getting one of those cab sealers made be Creative Products from a guy locally but its been a phone tag/time issue thing trying to get it. The way he had it set up was he made his own "bulk-head" using plywood and 2x4's instead of buying the one they offered. I can make one through work as we have full fabrication facilities, but would like some ideas of going about it.
__________________
2009 Honda Fit CfC (bsf 44.9 mpg)
2000 Tahoe Limited
1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below
1991 GMC CrewCab Dually 4x4, just going to fix things up for now
1982/1989 K5/GMC Jimmy 2wd
1987 GMC 1/2 ton swb 2wd Crew (sold)
kevinr1970 is offline   Reply With Quote
Old 01-08-2005, 03:16 PM   #17
thegame55974
Junior Member
 
thegame55974's Avatar
 
Join Date: Jul 2004
Location: Wahpeton N.D.
Posts: 182
I hope you can see these pictures. My camera is really getting bad. The back is actually the rear of a late seventies Chevy with some adding and trimming where needed. It has a 10 to 12in section cut and relocated basckward to provide some room in the interior down by the floor which I use for speaker placement and odds and ends. The whole thing was finally welded into place. The factory roll bar was extended to the frame and added on to get the height up. Still don't know what I will do for a tailgate. That would look alot better than the airgate. Just driving home last night, I couldn't believe the confused looks we were getting. Now, driving this thing again with the new lift kit, I wouldn't buy anything but BDS. I can direct you to the guy who did alot of this install. Now, off to melt some snow! Later, Nate


__________________
Crime doesn't pay...Does that mean my job is a crime???

-Nate
Drivers and Projects
1995 GMC
1979 3/4 Chevy,
1978 Suburban
1996 Dodge Dakota Sport
2009 Kia Spectra 5
thegame55974 is offline   Reply With Quote
Old 01-09-2005, 12:53 AM   #18
kevinr1970
Senior Member
 
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
So lets see if I got this straight.
You took the back of a cab from a PU, and then welded it in to cover the opening? So this is a permanent deal then?
I thought about doing something similar with cutting the rear of a cab, then making a plate to match up to the blazer cab. Weld the two together to make a removable cover. It would be a bolt on piece. Lots of work to do though.

As for your tailgate issue, my GF used to have an '81 2wd swb and I have a '81 GMC Jimmy. I measured her truck tailgate against my Blazer tailgate and came away convinced that you can bolt a truck tailgate in place of your Blazer tailgate. On my Jimmy the holes/weld nuts to mount the brackets for cable supports and latching mechanism were there. I don't remember exactly, but I remember thinking the tailgate hinges would bolt up as well? So much so I bought a nice tailgate when one came up to have for when I make this conversion.
You should check your Blazer against a truck, I bet its the same.

PS - Whats BDS?
__________________
2009 Honda Fit CfC (bsf 44.9 mpg)
2000 Tahoe Limited
1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below
1991 GMC CrewCab Dually 4x4, just going to fix things up for now
1982/1989 K5/GMC Jimmy 2wd
1987 GMC 1/2 ton swb 2wd Crew (sold)
kevinr1970 is offline   Reply With Quote
Old 01-09-2005, 02:19 AM   #19
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
A pickup tailgate will bolt right up on a Blazer. Grab the hinges and strap/striler as well, and bolt them right up. I have one on my Blazer right now. Since I got rid of the roof, I didn't need a window and all of teh other stuff. The holes are even where you need them.
__________________
1974 Jimmy- 5.3/4L80e/NP241
Jonboy is offline   Reply With Quote
Old 01-09-2005, 12:07 PM   #20
thegame55974
Junior Member
 
thegame55974's Avatar
 
Join Date: Jul 2004
Location: Wahpeton N.D.
Posts: 182
When I first saw my old Blazer after about five years, I was thinking, this thing used to have a sun roof. I didn't provide enough info in my last post. It actually has part of the roof section of the 77 pickup welded and smoothed out as well. Kind of wished they had left the sun roof there. They did an excellant job. Thanks for the info on the tailgate. Gonna have to give it a try. First nice tailgate that comes in to the salvage yard here is mine. BDS=Big Dicks Suspension. The Blazer has a 6 in. lift. Won't ever use a body lift. I also use Trailmaster shocks. Very happy with the whole setup.
thegame55974 is offline   Reply With Quote
Old 01-09-2005, 12:42 PM   #21
Fry
Registered User
 
Join Date: Dec 2003
Location: Sask, Canada
Posts: 169
heres my 75
was lifted 4" on 33s and 3/4 ton diffs but bought a daily driver 4x4 so converting it to 2wd laid out on bags. Not certain how far I'm going with it, its on hold right now till I get my 28 tudor sedan done.
Fry is offline   Reply With Quote
Old 01-26-2005, 09:54 PM   #22
goldwing2000
Registered User
 
goldwing2000's Avatar
 
Join Date: Nov 2004
Location: SE Michigan
Posts: 73
I'll post pics once it stops freaking snowing and I can wash all the salt off the damn thing but in the mean time, this is how I bought it:

1989 Blazer, black
350 carburetor motor (who knows how old it is)
TH350
NP205
Warn Hubs
6" susp lift (blocks rear, springs front)
10-bolt up front
12-bolt in back
SUCK-ASS 2.73 gears (wish I had known that before I bought it)
35x12.50-15 BFG MTs on 15x10 black steelies (just bought today)
no radio
heater direction door is malfunctioning
already rebuilt three or four wiring harnesses
needed a COMPLETE tune-up
rear of bed by tailgate rusted out from having the back window stuck open 6" for who knows how long
blown-out upper ball joints and pitman arm
Headers leaking

*sigh*

But fixing them is half the fun, right? Just wish I could have been the one to break it.

Have to say, it does look good, though. The tailgate area is the only bad rust and that's a frickin' miracle around here.

Oh, almost forgot... it's got a massive hillbilly front tube bumper with integrated... well... ramp bars, I guess. I'd call it a skid plate but it's so much more than that. Heh. You'll see.
__________________
~Kane

USMC
NRA
GWRRA
AMA

Remember:
Except for Slavery, Fascism, Nazism, Totalitarianism and Theocracies,
WAR HAS NEVER SOLVED ANYTHING!

Last edited by goldwing2000; 01-26-2005 at 09:59 PM.
goldwing2000 is offline   Reply With Quote
Old 01-28-2005, 01:45 AM   #23
Esteban86K5
Registered User
 
Esteban86K5's Avatar
 
Join Date: Oct 2003
Location: Bakersfield
Posts: 133
86 Blazer with a few mods.

Last edited by tvblazer78; 03-02-2009 at 05:12 PM.
Esteban86K5 is offline   Reply With Quote
Old 03-04-2005, 01:13 PM   #24
fulltop74
Registered User
 
fulltop74's Avatar
 
Join Date: May 2004
Location: Beaverton, OR
Posts: 50
__________________
1974 chevy blazer 2wd, 454, 22 inch wheels
1970 chevy c10, 350, no wheels yet
fulltop74 is offline   Reply With Quote
Old 03-04-2005, 02:52 PM   #25
ItsNotABlazer
The full convertible guy
 
ItsNotABlazer's Avatar
 
Join Date: Jul 2001
Location: Paris Texas
Posts: 728
Beautiful truck Fulltop74. Have any interior shots? Also those seem small to be 22's.

Brad
__________________
2012 Kawasaki Vaquero (Lime Green)
2000 BMW 740iL
1995 Chevy ECSB riding on air
1975 GMC Jimmy 2WD lowered 4/6
1972 Chevy Trazer soon to be roadster
1965 Mustang 289/3 speed (friends dad bought it new)
1964 Chevy C10 (dad bought it new)
ItsNotABlazer is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com