Painted Spid suggestions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

57taskforce · 05-01-2020, 10:12 PM

I recently aquired a ‘69 K10 and I’m wondering if anyone has any suggestions on how I can get the paint off the spid? I’m hoping this isn’t a lost cause.

**Getter-Done** · 05-01-2020, 10:21 PM

I would try something along this line of cleaner. Link below
I would test on a corner first with what ever you try.
Good luck

Link:https://www.acehardware.com/departme...UEUA&gclsrc=ds

.

weim55 · 05-01-2020, 10:41 PM

What I did: Take the door off and freeze it. I did mine in -5 degree weather in the winter. Used duct tape and peeled the paint right off. Clean. Nothing else I tried worked worth a darn. Might be worth a try.......

Steve weim55 Colorado

57taskforce · 05-01-2020, 11:11 PM

Quote:

Originally Posted by weim55

What I did: Take the door off and freeze it. I did mine in -5 degree weather in the winter. Used duct tape and peeled the paint right off. Clean. Nothing else I tried worked worth a darn. Might be worth a try.......

Steve weim55 Colorado

Very very interesting. Wonder how much trouble I’ll get in with Mrs.Taskforce if I put it in the freezer???

I’m going to try it.

**truckster** · 05-01-2020, 11:30 PM

Quote:

Originally Posted by 57taskforce

Very very interesting. Wonder how much trouble I’ll get in with Mrs.Taskforce if I put it in the freezer???

I’m going to try it.

She won't mind at all. Now, if you cure some fresh enamel-painted parts in the oven, you might get a reaction.

weim55 · 05-02-2020, 12:25 AM

Quote:

Originally Posted by 57taskforce

Very very interesting. Wonder how much trouble I’ll get in with Mrs.Taskforce if I put it in the freezer???

I’m going to try it.

Mine was a ‘71 that had the clear plastic lamination. I think the paint didn’t adhere well to that.

Steve weim55 Colorado

**too much stuff** · 05-02-2020, 09:10 AM

I don't think you will have much luck since 69 will be a paper spid. Good luck.

**HO455** · 05-02-2020, 12:51 PM

Quote:

Originally Posted by 57taskforce

Very very interesting. Wonder how much trouble I’ll get in with Mrs.Taskforce if I put it in the freezer???

I’m going to try it.

Just wrap it in that fancy freezer paper and write CHOPS on the outside and she may never know. And what she doesn't know....

05-01-2020, 10:12 PM	#1
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,443	Painted Spid suggestions I recently aquired a ‘69 K10 and I’m wondering if anyone has any suggestions on how I can get the paint off the spid? I’m hoping this isn’t a lost cause. Attached Images __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

05-01-2020, 10:21 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,312	Re: Painted Spid suggestions I would try something along this line of cleaner. Link below I would test on a corner first with what ever you try. Good luck Link:https://www.acehardware.com/departme...UEUA&gclsrc=ds . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

05-01-2020, 10:41 PM	#3
weim55 Registered User Join Date: Jan 2017 Location: Larkspur, Colorado Posts: 916	Re: Painted Spid suggestions What I did: Take the door off and freeze it. I did mine in -5 degree weather in the winter. Used duct tape and peeled the paint right off. Clean. Nothing else I tried worked worth a darn. Might be worth a try....... Steve weim55 Colorado

05-02-2020, 09:10 AM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Painted Spid suggestions I don't think you will have much luck since 69 will be a paper spid. Good luck. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.