AZ 1969 1 ton for parts

[t korinek]

Tried selling this whole for a while, I guess nobody wants a 1 ton project.

Here's the specs on it
6 cylinder
turbo 400
12' flatbed with tommy lift

Here's whats sold already: Transmission,trans. linkage, drive shaft, doors.


Everything else is still available including:
Cab with marker light roof, real good shape $800, it is a low hump cab.

Grill is not perfect, just a decent driver $100

C30 emblems $45 shipped, it will be little bit before I get the front fenders off.

Anything else ask & I'll price it.
Thanks,
Tom

[1968aj]

how does gauge cluster look?

[CrewCab59]

If it gets torn down ,ship quote 37721

3 crossmembers : carrier bearing , middle in front of spring hangers and last.

4 leaf spring hangers.

Scott

[doo142]

I am looking for roof marker light lens . Would you happen to have any in good shape? Thanks

[waylonbud]

Hi Tom,
Did the mirrors go with the doors. If not I would like a shot at them. Shipped to 37303.
Thanks.

[southern parts]

Hey Tom, whats the condition and price of the hood emblem.

[ricks71pu]

Aux battery tray?

[cypressbog]

2nd on the outside mirrors pending closer pics.

[BLT gmc]

? Is this the 69 only really rare Blue interior? How is the heater core box and brackets? Bruce

[engairuph]

I need the dash wiring harness if this is a gauge cluster, not a bunch of splices and how much?

[gmclonghorn]

interested in front bumper . what is condition. dependent on price of shipping to 92683. thanks mike

[t korinek]

gmclonghorn, I'll get some pics of the bumper.

engairuph It was a gauge truck, I'll take a closer look at the harness condition.

BLT gmc Not sure about the rare blue, I'll check out the heater core box & which brackets?

This set of mirrors did go with the doors, I have another pair almost exact to these, in better condition, I'll get some pics (I have 2 pics that I'm posting) waylonbud & then cypressbog is up on them.

ricks71 no aux battery tray on this, I may have one from another truck, I'll take a look.

Southern parts, let me check out the emblem.

doo142, all roof lights in bad shape (broken)

CrewCab59, if you have some time, to wait on all the cross members & spring hangers, I'm working on getting the bed sold, before I can get at the frame.
I'll sell all of that for $150 + shipping

1968aj cluster is in good shape, has around 90K miles on it, it has the lower gauges, with no tach. $45 shipped, untested condition.
Thanks,
Tom

[doo142]

Originally Posted by t korinek

gmclonghorn, I'll get some pics of the bumper.

engairuph It was a gauge truck, I'll take a closer look at the harness condition.

BLT gmc Not sure about the rare blue, I'll check out the heater core box & which brackets?

This set of mirrors did go with the doors, I have another pair almost exact to these, in better condition, I'll get some pics (I have 2 pics that I'm posting) waylonbud & then cypressbog is up on them.

ricks71 no aux battery tray on this, I may have one from another truck, I'll take a look.

Southern parts, let me check out the emblem.

doo142, all roof lights in bad shape (broken)

CrewCab59, if you have some time, to wait on all the cross members & spring hangers, I'm working on getting the bed sold, before I can get at the frame.
I'll sell all of that for $150 + shipping

1968aj cluster is in good shape, has around 90K miles on it, it has the lower gauges, with no tach. $45 shipped, untested condition.
Thanks,
Tom

Thanks for checking, any chance the middle ones on this truck are any good?

[CrewCab59]

Tom,


CrewCab59, if you have some time, to wait on all the cross members & spring hangers, I'm working on getting the bed sold, before I can get at the frame.
I'll sell all of that for $150 + shipping


Time isn't a problem , I will stay in touch .

Thanks
Scott

[Jake1971]

Hey Tom, I am searching for:
1. A bottom seat foam for my '67 bench and
2. a couple of rear tail light harnesses in decent condition (the ones that go from the crossmember to the lights).
3. Firewall insulation pads (left and center ones)
Can we get a picture of the SPID?
LMK what you have shipped to 78602.
Thanks!

[Jake1971]

Originally Posted by Jake1971

Hey Tom, I am searching for:
1. A bottom seat foam for my '67 bench and
2. a couple of rear tail light harnesses in decent condition (the ones that go from the crossmember to the lights).
3. Firewall insulation pads (left and center ones)
Can we get a picture of the SPID?
LMK what you have shipped to 78602.
Thanks!

In post #15 I asked about these parts. Any luck?
Thanks for the SPID pictures.

[t korinek]

Firewall pads are deteriorated, seat cushion is tore up on driver side
I haven't checked on the rear harness yet

I'll take a look at the wheels to see if they're split rims or not

[engairuph]

Originally Posted by Jake1971

In post #15 I asked about these parts. Any luck?
Thanks for the SPID pictures.

I have a 67 bench seat right now, what would offer for the bottom foam?

[Jake1971]

Originally Posted by t korinek

Firewall pads are deteriorated, seat cushion is tore up on driver side
I haven't checked on the rear harness yet

Thanks for looking.

Originally Posted by engairuph

I have a 67 bench seat right now, what would offer for the bottom foam?

Just so we are not hijacking the OP's thread, I started a WTB thread of my own for it and other small parts. Here is the link:
http://67-72chevytrucks.com/vboard/s....php?p=7039066

[waylonbud]

Tom, those are ok with me. Still interested if brackets come apart easy to make shipping reasonable.
Thank you.

[into69z]

TOM-any tears or damage to the door panel vinyl? it appears dark blue-interested in the arm rests as well....condition and price please....also the defroster vents if they are dark blue and the seat belts as well....again looking for dark blue on this stuff pics if you can and price please.....

[6T7NCHVYC10]

Is there a front sway bar? If so how much shipped to 31321

[t korinek]

Pics of mirrors, driver mirror glass is broken $80 for the pair + shipping

[t korinek]

more pics

[bollybib]

Pics and a price for the blue hood bowtie if it's my turn.