Rez Power Steering kit HELP PLEASE ASAP

[Pritchard1970]

I just got the Rez power steering kit from GMC Pauls and it seems me that it is not fitting right. I have attached some pics to help further explain my situacion and would appreciate anybody's help.....The problem #1- the top right hole is no aligned with solid metal, the pic and explanation in the directions show the bracket and the top hole aligned in a place on the frame that will allow you to drill it out. Not the case for me #2- the bolts included in the kit are not long enough to go through the frame. My frame is a stock 2wd but it is boxed from the factory in the spot were the bolts go through......anybody have this problem? Help please!!!!Thanks for the replies

[zenish]

if thats a 1960-62 chevy,cpp sells the correct kit for your truck.that frame is nothing like my 64.

[Pritchard1970]

It a 1962 Fleetside....hope to find a solution

[slepysal]

Originally Posted by zenish

if thats a 1960-62 chevy,cpp sells the correct kit for your truck.that frame is nothing like my 64.

Yup, our 60-62 frames are diffirent. Rez list one kit but CPP list a kit for 60-62 pn 6062PSK ( and pn6366PSK for 63-66 )
I would sugest calling REZ up and see what they say .

[Pritchard1970]

After I ran into the problem and tried to solve it I cleaned up the manual box and all the associated bolts....it is in great shape and the worst case scenerio is that I reuse my original box.......but I am holding out hope.....what is the full name of the other company I should check out...CPP stands for what? thanks for the help guys

[kdevore2]

Classic Performance Products http://www.classicperform.com/

[zenish]

id make pauls give me the right kit.

[slepysal]

Update ? What hapened?

[Pritchard1970]

I have solved the problem and will post some pics in the next couple of days.....It has been a process but I think it will work out great...

[slepysal]

So did it work out ok ?