I guess EVERYBODY knew this but me... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RustyBucket · 10-24-2021, 11:54 PM

SLANT NOSE hood for '69-'72 from LMC. Who's got one & how is it? I see they're $500 and backordered. I tried the search a couple of ways and didn't see a thread about 'em.

https://www.lmctruck.com/1967-72-che...72-custom-hood

SLANT NOSE HOOD FOR '69 -'72.... I thought it was a pretty BIG DEAL, I've had '67-'68's & have two "square fronts" currently.
I like the slant nose much better.... maybe not $1000 better for two of them.... but maybe if they're nicely turned out.

jjzepplin · 10-25-2021, 06:24 AM

I like it. $693 though. About how much I paid for the truck. Money pit.

**special-K** · 10-25-2021, 07:00 AM

I didn't know about them. No loss

RustyBucket · 10-25-2021, 10:36 AM

People have been swapping '67-'68 frt. caps onto '69-'72's for years....

Davidf · 10-25-2021, 10:49 AM

So many items backordered! I need a new in cab fuel tank and can't get it.

**kwmech** · 10-25-2021, 12:05 PM

Interesting, never seen that. That is one of the reasons 68 is my favorite year.

67C10Step · 10-25-2021, 01:04 PM

Quote:

Originally Posted by Davidf

So many items backordered! I need a new in cab fuel tank and can't get it.

Wish you were closer. I am about pull the one out of my 67 that has a brand new sending unit in it. Probably not good enough for a show truck but for just about anything short of that it would work. Nothing wrong with it, just went with rear mounted tank.

Never saw the slant hood for a 69-70, if it were a good product I could see where it would make those trucks stand out.

weq92f · 10-25-2021, 01:40 PM

.

It might look wonky to some folk without the 67-68 grille though.

-klb

71c10RDU · 10-27-2021, 02:12 PM

Quote:

Originally Posted by Davidf

So many items backordered! I need a new in cab fuel tank and can't get it.

I have the in cab fuel tank out of my 71. I'm located in NC though.

indymachinist · 10-25-2021, 03:38 PM

I too had never seen that before. I have seen people doing custom work to make their hood look like that, but not a purchasable custom like that.

I think its cool. The tall flat front of the hoods on the 69-72 is one of my least favorite parts.

**3757chevy** · 10-25-2021, 11:49 PM

...chapster started another thread on this tonight. ..http://67-72chevytrucks.com/vboard/s...wpost&t=827237 ...But there has been people making them out of two hoods for years... http://67-72chevytrucks.com/vboard/s...d.php?t=244455

chapster · 10-27-2021, 01:36 AM

Sorry guy's,
I didn't mean to start another thread on same topic as Rusty's. I did a search and nothing came up.

I was thinking of making my own but this would save a lot of time depending on fitment.

RustyBucket · 10-27-2021, 11:18 AM

Quote:

Originally Posted by 3757chevy

...chapster started another thread on this tonight. ..http://67-72chevytrucks.com/vboard/s...wpost&t=827237 ...But there has been people making them out of two hoods for years... http://67-72chevytrucks.com/vboard/s...d.php?t=244455

3757chevy, is the hood on the orange truck in your post from LMC or a one off custom made from two hoods by a GOOD BODYMAN?
Probably wishful thinking to hope that the LMC hood would be good enough to paint and install without a lot of fitting and bodywork.

**3757chevy** · 10-27-2021, 10:59 PM

Quote:

Originally Posted by RustyBucket

3757chevy, is the hood on the orange truck in your post from LMC or a one off custom made from two hoods by a GOOD BODYMAN?
Probably wishful thinking to hope that the LMC hood would be good enough to paint and install without a lot of fitting and bodywork.

That picture is something I found and downloaded on the subject back in 2018. It is a picture that someone took in 2009. It is a custom made , but I know no more than that.

CastIron · 10-27-2021, 01:50 PM

I may be wrong, but I thought that 69-72 GMCs could use the 67-68 hood if some trim was changed. GMC fenders were the same from 68-72. Is this correct?

**raggedjim** · 10-28-2021, 11:22 AM

Quote:

Originally Posted by CastIron

I may be wrong, but I thought that 69-72 GMCs could use the 67-68 hood if some trim was changed. GMC fenders were the same from 68-72. Is this correct?

This is correct. The top piece of trim on the grill can be swapped with a 67-68 top bar. You also need the 67-68 hood latch, but it's an easy change for the GMC's.

jjzepplin · 10-28-2021, 04:14 AM

Backorder me one!

10-24-2021, 11:54 PM	#1
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	I guess EVERYBODY knew this but me... SLANT NOSE hood for '69-'72 from LMC. Who's got one & how is it? I see they're $500 and backordered. I tried the search a couple of ways and didn't see a thread about 'em. https://www.lmctruck.com/1967-72-che...72-custom-hood SLANT NOSE HOOD FOR '69 -'72.... I thought it was a pretty BIG DEAL, I've had '67-'68's & have two "square fronts" currently. I like the slant nose much better.... maybe not $1000 better for two of them.... but maybe if they're nicely turned out. __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!! Last edited by RustyBucket; 10-25-2021 at 10:26 AM.

10-25-2021, 06:24 AM	#2
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: I guess EVERYBODY knew this but me... I like it. $693 though. About how much I paid for the truck. Money pit. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 Last edited by jjzepplin; 10-28-2021 at 04:28 AM.

10-25-2021, 07:00 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: I guess EVERYBODY knew this but me... I didn't know about them. No loss __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-25-2021, 10:36 AM	#4
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	Re: I guess EVERYBODY knew this but me... People have been swapping '67-'68 frt. caps onto '69-'72's for years.... Attached Images __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

10-25-2021, 10:49 AM	#5
Davidf Registered User Join Date: Nov 2014 Location: Austin Posts: 749	Re: I guess EVERYBODY knew this but me... So many items backordered! I need a new in cab fuel tank and can't get it.

10-25-2021, 12:05 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,593	Re: I guess EVERYBODY knew this but me... Interesting, never seen that. That is one of the reasons 68 is my favorite year.

10-25-2021, 01:40 PM	#8
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,151	Re: I guess EVERYBODY knew this but me... . It might look wonky to some folk without the 67-68 grille though. -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

10-25-2021, 03:38 PM	#10
indymachinist Registered User Join Date: Jun 2015 Location: Indanapolis, IN Posts: 603	Re: I guess EVERYBODY knew this but me... I too had never seen that before. I have seen people doing custom work to make their hood look like that, but not a purchasable custom like that. I think its cool. The tall flat front of the hoods on the 69-72 is one of my least favorite parts. __________________ -Curt My 1968 Chevy shortbed stepside build

10-25-2021, 11:49 PM	#11
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,021	Re: I guess EVERYBODY knew this but me... ...chapster started another thread on this tonight. ..http://67-72chevytrucks.com/vboard/s...wpost&t=827237 ...But there has been people making them out of two hoods for years... http://67-72chevytrucks.com/vboard/s...d.php?t=244455 Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

10-27-2021, 01:36 AM	#12
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: I guess EVERYBODY knew this but me... Sorry guy's, I didn't mean to start another thread on same topic as Rusty's. I did a search and nothing came up. I was thinking of making my own but this would save a lot of time depending on fitment. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

10-27-2021, 01:50 PM	#15
CastIron Registered User Join Date: May 2013 Location: Oregon Posts: 329	Re: I guess EVERYBODY knew this but me... I may be wrong, but I thought that 69-72 GMCs could use the 67-68 hood if some trim was changed. GMC fenders were the same from 68-72. Is this correct?

10-28-2021, 04:14 AM	#17
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: I guess EVERYBODY knew this but me... Backorder me one! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.