AL Cutting up 65 cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mack B · 01-21-2018, 11:35 PM

Cab is rusty in all the usual places, but if you happen to need an uncommon piece or section I may can help you out. I just don’t want to scrap anything that someone may be able to use. $15.00+shipping per section. I’ll gladly take pictures of anything you need, if you see any thing else of interest just ask. I will probably not be able to cut any areas until weekends. Thanks for looking!

**DPowers** · 01-21-2018, 11:40 PM

Sail panels?

Mack B · 01-22-2018, 12:22 AM

Quote:

Originally Posted by DPowers

Sail panels?

There is one, but the finish on it is horrendous. I don't think its salvageable.

**DPowers** · 01-22-2018, 11:16 PM

Quote:

Originally Posted by Mack B

There is one, but the finish on it is horrendous. I don't think its salvageable.

So the one on the cab and the one in the floor of the cab are the same?
I may still be interested pending pics when you get the time.
My email is dwanepowers@att.net if that is easier.

Mack B · 01-22-2018, 11:47 PM

Quote:

Originally Posted by DPowers

So the one on the cab and the one in the floor of the cab are the same?
I may still be interested pending pics when you get the time.
My email is dwanepowers@att.net if that is easier.

No sir, the one in the cab was the earlier style and someone cut the portion that wraps around the cab off....with an axe it appeared

I couldn’t find it but pretty sure it’s been recycled.

The passenger side one is in better shape than I remember. It’s straight, but does have pretty deep scratches around the bottom. $30.00+shipping?

Edit: I’m wrong there was a third sail panel, that was different and butchered. The one in the cab was the right style but was cut up as well....still gone eitherway.

**ScottH** · 01-22-2018, 12:59 AM

can u post a pic of the center hump?

thanks

**pimpston65** · 01-22-2018, 01:03 AM

how bout both A pliars? can you cut the whole section from the bottom hinge hole area down. including both inside and outside the cab?

**pimpston65** · 01-22-2018, 01:12 AM

all this area.

MikeG. · 01-22-2018, 09:32 AM

Dash ?

Mack B · 01-22-2018, 11:59 AM

Quote:

Originally Posted by MikeG.

Dash ?

It’s got rust in the corners

Mack B · 01-22-2018, 11:49 AM

Quote:

Originally Posted by pimpston65

all this area.

Absolutely. It’s not perfect. There is some rust at the seam where the rocker meets the pillar. The kickpanel area inside is non existent.

**pimpston65** · 01-22-2018, 03:09 PM

Quote:

Originally Posted by Mack B

Absolutely. It’s not perfect. There is some rust at the seam where the rocker meets the pillar. The kickpanel area inside is non existent.

thank you for the photos. shes a bit too rough for my project...

Mack B · 01-22-2018, 12:01 PM

Quote:

Originally Posted by ScottH

can u post a pic of the center hump?

thanks

Absolutely!

jasons · 01-22-2018, 08:30 PM

I'd take the center section of the dash. How much to ship to zip 68924?

Mack B · 01-22-2018, 10:34 PM

Quote:

Originally Posted by jasons

I'd take the center section of the dash. How much to ship to zip 68924?

While not completely hacked up, the radio hole has been trimmed about an 1/8” see pic. If this isn’t a deal breaker tell me how much of the dash you want and I’ll get you a quote.

jasons · 01-23-2018, 09:37 AM

Quote:

Originally Posted by Mack B

While not completely hacked up, the radio hole has been trimmed about an 1/8” see pic. If this isn’t a deal breaker tell me how much of the dash you want and I’ll get you a quote.

I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.

Mack B · 01-23-2018, 07:56 PM

Quote:

Originally Posted by jasons

I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.

Mikeg did ask about the whole dash first, I thought the condition would have turned him away so I am sorry to jumble everything up. If he doesn't say he wants it by Friday, I'll cut the center out for you.

**aotte1** · 01-27-2018, 01:05 AM

Big back window install adhesive and tools

**aotte1** · 01-27-2018, 01:09 AM

Tools

Mack B · 01-28-2018, 08:58 PM

Quote:

Originally Posted by jasons

I think I can work with that. I'd take from the instrument panel opening to the glove box opening and a few inches on the top. Kind of like this, a couple more inches to each side would be good.

I got this cut out. Of course I made things worse by cutting into the ashtray bracket. If you still want it, its $30.00 to your door

jasons · 01-29-2018, 08:53 AM

I'll take it. What's your paypal info?

Quote:

Originally Posted by Mack B

I got this cut out. Of course I made things worse by cutting into the ashtray bracket. If you still want it, its $30.00 to your door

Inkfamous-13 · 04-01-2019, 03:47 PM

how much for roof? I need the center of outside and inside I bought one with a 70 douche bag pop up sunroof and have got a power moon roof and skin from a car but depending on price might just put back to stock

**DPowers** · 01-23-2018, 12:18 AM

Thanks, but the best I could do would be $25.00 shipped. If the rectangular brackets that are on the cab are there, I would do go $30 shipped for the brackets and the one sail panel.

Mack B · 01-23-2018, 12:41 AM

Quote:

Originally Posted by DPowers

Thanks, but the best I could do would be $25.00 shipped. If the rectangular brackets that are on the cab are there, I would do go $30 shipped for the brackets and the one sail panel.

I need the brackets for my project, but I will get the panel to your door for $30.00

**DPowers** · 01-28-2018, 10:19 PM

Quote:

Originally Posted by Mack B

I need the brackets for my project, but I will get the panel to your door for $30.00

Thanks and understand-will pass.

01-21-2018, 11:35 PM	#1
Mack B Registered User Join Date: Apr 2012 Location: L.ower A.labama Posts: 518	Cutting up 65 cab Cab is rusty in all the usual places, but if you happen to need an uncommon piece or section I may can help you out. I just don’t want to scrap anything that someone may be able to use. $15.00+shipping per section. I’ll gladly take pictures of anything you need, if you see any thing else of interest just ask. I will probably not be able to cut any areas until weekends. Thanks for looking! Attached Images

01-21-2018, 11:40 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: Cutting up 65 cab Sail panels? __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-22-2018, 12:59 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Cutting up 65 cab can u post a pic of the center hump? thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-22-2018, 01:03 AM	#7
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Cutting up 65 cab how bout both A pliars? can you cut the whole section from the bottom hinge hole area down. including both inside and outside the cab? Attached Images Last edited by pimpston65; 01-22-2018 at 01:11 AM.

01-22-2018, 01:12 AM	#8
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Cutting up 65 cab all this area. Attached Images

01-22-2018, 09:32 AM	#9
MikeG. Registered User Join Date: Oct 2012 Location: Bastrop,TX Posts: 136	Re: Cutting up 65 cab Dash ?

01-22-2018, 08:30 PM	#14
jasons not enough hours in the day Join Date: Jan 2009 Location: Axtell, NE Posts: 550	Re: Cutting up 65 cab I'd take the center section of the dash. How much to ship to zip 68924? __________________ 65 K-10 Short Step 68 C-50 70 K-5 85 K-10 & piles of spare parts

01-27-2018, 01:05 AM	#18
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: Cutting up 65 cab Big back window install adhesive and tools Attached Images

01-27-2018, 01:09 AM	#19
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: Cutting up 65 cab Tools Attached Images

04-01-2019, 03:47 PM	#22
Inkfamous-13 Registered User Join Date: Feb 2017 Location: Lake los angeles, CA Posts: 132	Re: Cutting up 65 cab how much for roof? I need the center of outside and inside I bought one with a 70 douche bag pop up sunroof and have got a power moon roof and skin from a car but depending on price might just put back to stock __________________ 'yeah I just had it painted' me: " dam man that thing looks like a side of beef" or "dam bro looks like a sack of walnuts" or the ever so smart ass: " well at least it's a friendly color, it waves as you drive by" first Boss's famous words "I dont know anyone who can see both sides at the same time" Just my 2 event's, tho nobody Carr's, sincerely AssHoleExtraordinaire.....

01-23-2018, 12:18 AM	#23
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: Cutting up 65 cab Thanks, but the best I could do would be $25.00 shipped. If the rectangular brackets that are on the cab are there, I would do go $30 shipped for the brackets and the one sail panel. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.