|
|
|
09-08-2005, 02:18 PM
|
#1 |
|
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
axleshaft questions
Alright, I have a 6 lug 67 C10. I just picked up an axle for it with 3.08 gears, so I can actually drive it faster than 60 mph (it has 3.73's now). The problem is that the axle that I bought is a 5 lug. Are the axle shafts interchangeable between the two? I believe it's the same axle. the new one is from a 69-70 C10 with a 350 V8. If not, can I get 5 lug hubs from an aftermarket company for the front end?
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
|
|
|
09-08-2005, 02:33 PM
|
#2 |
|
Registered User
Join Date: Jul 2005
Location: DFW
Posts: 463
|
Unless somebody knows specifically, you'll need to measure the axles. Both should be 30 spline so as long as they're they same length you can swap your 6 lugs back in.
If you want to go 5 lug up front you'll be better off just getting a disc brake kit with new 5 lug spindles or swapping your front susp for one from a factory disc truck. |
|
|
|
|
09-08-2005, 03:04 PM
|
#3 |
|
It's a catastrophic success.
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
5 lug axles are longer than the 6 lug axles.If you convert a 6 to 5 it makes the drums stick out 3/4" so it wears wrong on the brake shoes.a 6 in a 5 will cause the drum to rub the backing plate.
Id leave it 5 and do a front disk swap from a 71'up |
|
|
|
|
09-08-2005, 02:57 PM
|
#4 |
|
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,746
|
I doubt that your new axle is 69-70. 69-70 should still have 6 lug. 5 lug axles are probably 3/4" longer than your 6 lug axles.
__________________
 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
