Exhaust out the side? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tomsC10R · 01-16-2004, 08:48 PM

Does anyone have any pictures of a 67-72 with the exhaust exiting out the side of the truck in front of the rear tires?

Right now my exhaust exits out the back, but the pipes go under the axle housing -- I don't really like that. The truck has lowering blocks and there's not much room with the F*ord 9".

What does everyone have for a cross over? Any h H-pipes or X-pipes? Where do you have them? Right now my exhaust runs right along the frame rails, I'm not sure where the best place would be to run a cross over?

Thanks

*rage'nrat638* · 01-16-2004, 08:54 PM

cross over.....they say make a mark on the exhaust pipe with a crayon....where it stops melting...or burning off is where you want the crossover at

before the rear wheels is fine...all a matter of choice

ROAD DOG · 01-16-2004, 09:04 PM

I don;t have a pic but thats how my set up is right now!!

ckenwright · 01-16-2004, 09:06 PM

I've always wanted to use the x-pipe, with a NASCAR type side exit before the back wheels. I think the long flat exhaust exit from the side looks really good.

JoetheMobster · 01-16-2004, 09:09 PM

I put mine out the side! Mine used to have it going out the back, but the muffler was rusted all to hell.

I'll try and dig out some pictures!

tomsC10R · 01-16-2004, 09:26 PM

Rage,
Thanks for the tip!!

Road Dog,
Get that camera out

Ckenwright,
That's exactly how I was thinking of doing mine. Were you thinking of exiting it on one side or both sides?

Joe,
Thanks for looking for the pictures

Right now my exhaust (by the way I did not do this

) is leaning up against the trailing arms and very close to the drive shaft.

Thanks for all the feedback!!

ckenwright · 01-16-2004, 09:27 PM

Tomsc10r

I was thinking both sides. I like a balanced truck.

tomsC10R · 01-16-2004, 09:30 PM

Quote:

Originally posted by ckenwright
Tomsc10r

I was thinking both sides. I like a balanced truck.

Me too

jay-dawg · 01-16-2004, 09:35 PM

I wanna do this too except coming from under the steps. Let's see those pics.

Jay

jef5150 · 01-16-2004, 09:43 PM

sorry about the pic quality............ jeff

jay-dawg · 01-16-2004, 09:49 PM

jeff...that's your truck???? I think I have that pic from a couple years ago. can you draw a diagram of how you ran the pipes? Thats exactly how I want it....except with square camaro pipes at the end.

jef5150 · 01-16-2004, 10:19 PM

Quote:

heres 1....(not mine)

sorry not mine.......jeff

special70gmc · 01-16-2004, 10:23 PM

jere you go............-kyle

special70gmc · 01-16-2004, 10:24 PM

2

CG · 01-16-2004, 10:26 PM

the exhaust with the small meg tips on the red truck looks great...second look maybe those arent megs...still looks great though

1969 GMC · 01-16-2004, 10:53 PM

when i get some money (will i ever?) i'd like to run mine out the side, with some DF 40 series flows, so i can hear my exhaust bounce off things next to me (cars, trees, etc)

tomsC10R · 01-16-2004, 11:28 PM

Quote:

Originally posted by 1969 GMC
when i get some money (will i ever?) i'd like to run mine out the side, with some DF 40 series flows, so i can hear my exhaust bounce off things next to me (cars, trees, etc)

That's what I was thinking too

Make sure people are awake when I'm passing em on the freeway.

tomsC10R · 01-16-2004, 11:29 PM

Thanks for the pictures!! Keep em coming

D-Money · 01-17-2004, 02:53 AM

This pics was taken a few years ago before i started tearing my truck apart

D-Money · 01-17-2004, 02:55 AM

Here is another angle

stelth2002 · 01-17-2004, 03:45 AM

Thats how mine is and i like it that way. Sounds good and isnt to loud for me

D-Money · 01-17-2004, 04:02 AM

Another pic

Blue Beard · 01-17-2004, 11:25 AM

Rember this will change the back pressure on the engine.........need to retune.......................

WB72 · 01-17-2004, 12:42 PM

Heres an interesting site about exhaust

Exhaust web site

Hope this helps.

tomsC10R · 01-17-2004, 01:20 PM

D-Money,
thanks for the pics. That's a sweet truck!!!!!!!

Blue Beard,
I'm going to be tuning until I'm blue in the face, I just bought efi.

WB72,
thanks for the website.

01-16-2004, 08:48 PM	#1
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Exhaust out the side? Does anyone have any pictures of a 67-72 with the exhaust exiting out the side of the truck in front of the rear tires? Right now my exhaust exits out the back, but the pipes go under the axle housing -- I don't really like that. The truck has lowering blocks and there's not much room with the F*ord 9". What does everyone have for a cross over? Any h H-pipes or X-pipes? Where do you have them? Right now my exhaust runs right along the frame rails, I'm not sure where the best place would be to run a cross over? Thanks __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

01-16-2004, 09:04 PM	#3
ROAD DOG Top of the foodchain Join Date: Oct 2003 Location: 3.5 miles from Mile Hi Stadium Posts: 127	I don;t have a pic but thats how my set up is right now!! __________________ 1970 K-10 4x4 1975 Jeep CJ-5 4x4 1990 Jeep XJ 4x4 Smell the Magic!

01-16-2004, 09:09 PM	#5
JoetheMobster Listening since '86 Join Date: Sep 2001 Location: Canada Posts: 1,799	I put mine out the side! Mine used to have it going out the back, but the muffler was rusted all to hell. I'll try and dig out some pictures! __________________ 2007 Saturn Aura - hey it WAS a GM product

01-16-2004, 09:26 PM	#6
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Rage, Thanks for the tip!! Road Dog, Get that camera out Ckenwright, That's exactly how I was thinking of doing mine. Were you thinking of exiting it on one side or both sides? Joe, Thanks for looking for the pictures Right now my exhaust (by the way I did not do this ) is leaning up against the trailing arms and very close to the drive shaft. Thanks for all the feedback!! __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

01-16-2004, 09:35 PM	#9
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	I wanna do this too except coming from under the steps. Let's see those pics. Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

01-16-2004, 08:54 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	cross over.....they say make a mark on the exhaust pipe with a crayon....where it stops melting...or burning off is where you want the crossover at before the rear wheels is fine...all a matter of choice

01-16-2004, 09:06 PM	#4
ckenwright Registered User Join Date: May 2003 Location: Phoenix, AZ Posts: 104	I've always wanted to use the x-pipe, with a NASCAR type side exit before the back wheels. I think the long flat exhaust exit from the side looks really good.

01-16-2004, 09:27 PM	#7
ckenwright Registered User Join Date: May 2003 Location: Phoenix, AZ Posts: 104	Tomsc10r I was thinking both sides. I like a balanced truck.

01-16-2004, 09:43 PM	#10
jef5150 Inline 69 Join Date: Apr 2003 Location: valleysprings,california Posts: 1,018	heres 1....(not mine) sorry about the pic quality............ jeff Attached Images

01-16-2004, 09:49 PM	#11
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	jeff...that's your truck???? I think I have that pic from a couple years ago. can you draw a diagram of how you ran the pipes? Thats exactly how I want it....except with square camaro pipes at the end. __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

01-16-2004, 10:23 PM	#13
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	jere you go............-kyle Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2004, 10:24 PM	#14
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	2 Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2004, 10:26 PM	#15
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,846	the exhaust with the small meg tips on the red truck looks great...second look maybe those arent megs...still looks great though

01-16-2004, 10:53 PM	#16
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	when i get some money (will i ever?) i'd like to run mine out the side, with some DF 40 series flows, so i can hear my exhaust bounce off things next to me (cars, trees, etc) __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

01-16-2004, 11:29 PM	#18
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Thanks for the pictures!! Keep em coming __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.



Register or Log In To remove these advertisements.

01-17-2004, 02:53 AM	#19
D-Money Registered User Join Date: Dec 2003 Location: CA Posts: 315	This pics was taken a few years ago before i started tearing my truck apart Attached Images __________________ 1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon.

01-17-2004, 02:55 AM	#20
D-Money Registered User Join Date: Dec 2003 Location: CA Posts: 315	Here is another angle Attached Images __________________ 1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon.

01-17-2004, 03:45 AM	#21
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Thats how mine is and i like it that way. Sounds good and isnt to loud for me __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

01-17-2004, 04:02 AM	#22
D-Money Registered User Join Date: Dec 2003 Location: CA Posts: 315	Another pic Attached Images __________________ 1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon.

01-17-2004, 11:25 AM	#23
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Rember this will change the back pressure on the engine.........need to retune....................... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-17-2004, 12:42 PM	#24
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Heres an interesting site about exhaust Exhaust web site Hope this helps. __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

01-17-2004, 01:20 PM	#25
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	D-Money, thanks for the pics. That's a sweet truck!!!!!!! Blue Beard, I'm going to be tuning until I'm blue in the face, I just bought efi. WB72, thanks for the website. __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

Register or Log In To remove these advertisements.