CA Various 60-66 Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**argonaut** · 08-27-2013, 01:51 AM

Got some leftover parts. All prices do not include shipping.
Parts are located in Long Beach, CA.

steering column to firewall plate - $20

brake pedal and hanger bracket - $20

cowl heater block off plate - $20

SM420 4 speed transmission bearings and seals, all new - $100

steel bellhousing, fork, covers - $100

stepside lower cab plates and hardware - $40

small rear glass, defect in one corner - $30

small rear slider, one pane with minor crack (and a sweet american flag decal that I sported back in high school!) - $50

292 passenger side mount bracket - $50

1/2 ton coil springs, front cut 1 coil, rears stock - $30/pair

64-66 heater tube - $20

D52 front calipers, remanufactured units, 7/16 fittings, installed for setup on my 14 bolt, but never used, like new - $40 each, $75 pair

used big block water pump, working condition when swapped for a high flow aluminum unit - $20

steel small block water neck - $5

11" clutch disk, 10-spline, bought from napa, but went with a 12" instead, 100% new - $30

64-66 doors, bare, very straight and free from bondo, but the usual rusty bottoms/corners, great base for patch panels - $30 each

68lowburb · 11-17-2013, 11:39 PM

doors still available ?

**argonaut** · 11-18-2013, 12:55 AM

They sure are.

1964Chevy · 02-09-2014, 09:47 PM

Is the cowl side heater plate still available?

1963c-10 · 02-10-2014, 11:11 AM

Any chance you'd sell the bellhousing covers separate?

oem4me · 02-10-2014, 12:23 PM

Interested in slider. Got a pic of the crack? PM me if you want.

1963c-10 · 02-14-2014, 02:24 PM

Quote:

Originally Posted by 1963c-10

Any chance you'd sell the bellhousing covers separate?

????

truckeroy · 02-10-2014, 07:00 PM

Interested in front and rear spring sets. Total cost shipped to 62565?
Thanks, Roy

**argonaut** · 02-13-2014, 02:17 AM

Hey guys. I still have all the parts except I think my dad took the springs. I just got back into town so I'll get photos of the slider when it's light out.

**argonaut** · 02-17-2014, 01:09 AM

Pulled out the parts and a few boxes today, but I'm travelling for work again this week, will get shipping prices Friday.

1964 Chevy, The cowl-heater block-off plate is yours. I'll get the shipping price on Friday.

1963C-10, I'll glady sell you just the covers. Will get you shipping price on Friday if you give me your zip code.

oem4me, here are a couple better pics of the slider.

Leroy-B1 · 02-17-2014, 07:44 AM

Are the calipers the same as 72 Chevy truck?

1963c-10 · 02-17-2014, 11:06 AM

Im in Fayetteville NC 28306. Thanks

oem4me · 02-17-2014, 03:17 PM

Passing on the slider for now. Thank you.

*Barney 66* · 02-18-2014, 02:53 PM

Ill take the doors! I am in San Diego and can drop the cash off on Thursday or Friday or Saturday, Let me know what is good for you.

Thanks Barney
619-942-0565

*Barney 66* · 03-14-2014, 01:46 PM

Quote:

Originally Posted by Barney 66

Ill take the doors! I am in San Diego and can drop the cash off on Thursday or Friday or Saturday, Let me know what is good for you.

Thanks Barney
619-942-0565

I asked to buy the doors weeks ago!!!!!!! still have not heard back!!!!!!!!!! I bought some other ones. If you are going to post parts for sale you should respond to the guys wanting them.. I Suggest you take your post down and try craigslist. Def will ignore anymroe posts of anything you have.

bigcowl-imp · 02-28-2014, 09:38 AM

Still have the cowl-heater block-off plate ?? i sent u a pm a couple weeks ago.

**chevy_man5** · 02-28-2014, 11:04 AM

How much for shipping the slider to a business at 83642?

Bigru · 02-28-2014, 04:22 PM

Did you sell the doors and the heater block off plate?

**chevy_man5** · 03-12-2014, 03:30 PM

Bump to check on slider.

No worries if you are busy, just wanted to check in on it.

BA Mustang · 03-12-2014, 09:53 PM

Still have the cowl plate?

ramos13131 · 03-12-2014, 11:34 PM

Do u still have the I'm looking for driver side what the condition of the door

bigcowl-imp · 03-13-2014, 07:15 AM

I asked about the cowl plate about a month ago and he still has not answered a pm about it.... but yet he is here about every other day.....

**argonaut** · 03-14-2014, 05:32 AM

We can close the thread if it would be proper. I'm traveling for work every week so not able to ship stuff very easily right now. Sorry for wasting anyone's time. Unless you aren't in a hurry for parts.

**chevy_man5** · 03-14-2014, 10:05 AM

Quote:

Originally Posted by argonaut

We can close the thread if it would be proper. I'm traveling for work every week so not able to ship stuff very easily right now. Sorry for wasting anyone's time. Unless you aren't in a hurry for parts.

I'm in no hurry, was just checking in.

chevy_mike · 03-14-2014, 02:32 PM

Quote:

Originally Posted by argonaut

We can close the thread if it would be proper. I'm traveling for work every week so not able to ship stuff very easily right now. Sorry for wasting anyone's time. Unless you aren't in a hurry for parts.

Closing thread per OP suggestion.

Anyone waiting responses, PM the OP.

08-27-2013, 01:51 AM	#1
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Various 60-66 Parts Got some leftover parts. All prices do not include shipping. Parts are located in Long Beach, CA. steering column to firewall plate - $20 brake pedal and hanger bracket - $20 cowl heater block off plate - $20 SM420 4 speed transmission bearings and seals, all new - $100 steel bellhousing, fork, covers - $100 stepside lower cab plates and hardware - $40 small rear glass, defect in one corner - $30 small rear slider, one pane with minor crack (and a sweet american flag decal that I sported back in high school!) - $50 292 passenger side mount bracket - $50 1/2 ton coil springs, front cut 1 coil, rears stock - $30/pair 64-66 heater tube - $20 D52 front calipers, remanufactured units, 7/16 fittings, installed for setup on my 14 bolt, but never used, like new - $40 each, $75 pair used big block water pump, working condition when swapped for a high flow aluminum unit - $20 steel small block water neck - $5 11" clutch disk, 10-spline, bought from napa, but went with a 12" instead, 100% new - $30 64-66 doors, bare, very straight and free from bondo, but the usual rusty bottoms/corners, great base for patch panels - $30 each __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 02-17-2014 at 01:12 AM.

11-17-2013, 11:39 PM	#2
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Various 60-66 Parts doors still available ?

11-18-2013, 12:55 AM	#3
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Various 60-66 Parts They sure are. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-09-2014, 09:47 PM	#4
1964Chevy Registered User Join Date: Jan 2012 Location: Denton, Texas Posts: 92	Re: Various 60-66 Parts Is the cowl side heater plate still available? __________________ If your strength is small, don't carry heavy burdens. If your words are worthless, don't give advice. Chinese Proverb

02-10-2014, 11:11 AM	#5
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Various 60-66 Parts Any chance you'd sell the bellhousing covers separate? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-10-2014, 12:23 PM	#6
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: Various 60-66 Parts Interested in slider. Got a pic of the crack? PM me if you want.

02-10-2014, 07:00 PM	#8
truckeroy Registered User Join Date: Oct 2013 Location: Shelbyville, IL Posts: 111	Re: Various 60-66 Parts Interested in front and rear spring sets. Total cost shipped to 62565? Thanks, Roy __________________ 1948 Chevy 1/2T 1964 Chevy 1/2T stepside short bed 1939 Pontiac coupe Street Rod 2005 GMC 1/2T short bed

02-13-2014, 02:17 AM	#9
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Various 60-66 Parts Hey guys. I still have all the parts except I think my dad took the springs. I just got back into town so I'll get photos of the slider when it's light out. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-17-2014, 01:09 AM	#10
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Various 60-66 Parts Pulled out the parts and a few boxes today, but I'm travelling for work again this week, will get shipping prices Friday. 1964 Chevy, The cowl-heater block-off plate is yours. I'll get the shipping price on Friday. 1963C-10, I'll glady sell you just the covers. Will get you shipping price on Friday if you give me your zip code. oem4me, here are a couple better pics of the slider. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

02-17-2014, 07:44 AM	#11
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: Various 60-66 Parts Are the calipers the same as 72 Chevy truck?

02-17-2014, 11:06 AM	#12
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Various 60-66 Parts Im in Fayetteville NC 28306. Thanks __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-17-2014, 03:17 PM	#13
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: Various 60-66 Parts Passing on the slider for now. Thank you.

02-18-2014, 02:53 PM	#14
Barney 66 Account Suspended Join Date: Jan 2014 Location: san diego, California Posts: 130	Re: Various 60-66 Parts Ill take the doors! I am in San Diego and can drop the cash off on Thursday or Friday or Saturday, Let me know what is good for you. Thanks Barney 619-942-0565

02-28-2014, 09:38 AM	#16
bigcowl-imp Registered User Join Date: Nov 2013 Location: Mi. Posts: 121	Re: Various 60-66 Parts Still have the cowl-heater block-off plate ?? i sent u a pm a couple weeks ago.

02-28-2014, 11:04 AM	#17
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Various 60-66 Parts How much for shipping the slider to a business at 83642? __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread Last edited by chevy_man5; 03-12-2014 at 03:27 PM.



Register or Log In To remove these advertisements.

02-28-2014, 04:22 PM	#18
Bigru Registered User Join Date: Mar 2013 Location: Missouri City, Tx Posts: 321	Re: Various 60-66 Parts Did you sell the doors and the heater block off plate? __________________ 1965 Short Fleet http://67-72chevytrucks.com/vboard/s...d.php?t=637478 1983 Short Fleet (Under construction for my 13 year old son) 2008 GMC Denali 2012 Harley Roadglide Follow me on Instagram: Ru_django

03-12-2014, 03:30 PM	#19
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Various 60-66 Parts Bump to check on slider. No worries if you are busy, just wanted to check in on it. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

03-12-2014, 09:53 PM	#20
BA Mustang Registered User Join Date: Feb 2014 Location: usa Posts: 14	Re: Various 60-66 Parts Still have the cowl plate?

03-12-2014, 11:34 PM	#21
ramos13131 Registered User Join Date: Nov 2013 Location: Laguna Niguel ca Posts: 3	Re: Various 60-66 Parts Do u still have the I'm looking for driver side what the condition of the door

03-13-2014, 07:15 AM	#22
bigcowl-imp Registered User Join Date: Nov 2013 Location: Mi. Posts: 121	Re: Various 60-66 Parts I asked about the cowl plate about a month ago and he still has not answered a pm about it.... but yet he is here about every other day.....

03-14-2014, 05:32 AM	#23
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Various 60-66 Parts We can close the thread if it would be proper. I'm traveling for work every week so not able to ship stuff very easily right now. Sorry for wasting anyone's time. Unless you aren't in a hurry for parts. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

Register or Log In To remove these advertisements.