Where to buy - Push on door seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AUS64c10 · 03-16-2016, 06:03 AM

I know Precision Restoration Parts is now making push on door seals for 63 -66 c10's that don't need to be glued like the original ones but does any one know where to buy these from? I can't find them for sale anywhere.

Ronw435 · 03-16-2016, 07:03 AM

1997 Honda Civic. I believe a two door. There are threads on here about it. Fits like a glove!!

**PGSigns** · 03-16-2016, 07:35 AM

One of the vendors here had them listed a while back.
Jimmy

**Chevy Fleetside** · 03-16-2016, 10:04 AM

GMC Paul's has them.

**lolife99** · 03-16-2016, 10:06 AM

Quote:

Originally Posted by AUS64c10

I know Precision Restoration Parts is now making push on door seals for 63 -66 c10's that don't need to be glued like the original ones but does any one know where to buy these from? I can't find them for sale anywhere.

Just give them a call,...
http://precisionrestorationparts.com/nt-579-news.html

**Precision Parts** · 03-16-2016, 10:44 AM

Quote:

Originally Posted by AUS64c10

I know Precision Restoration Parts is now making push on door seals for 63 -66 c10's that don't need to be glued like the original ones but does any one know where to buy these from? I can't find them for sale anywhere.

There are a few vendors on this forum that sell them. You could start with GMC Pauls. He should have them in stock.

Thanks
Derek

61K10 · 03-16-2016, 12:52 PM

are they like the Honda ones? similar without the extra inside flap? anybody installed these on their tk? I have the Honda ones on my 61 and are a little short.

**Precision Parts** · 03-16-2016, 01:17 PM

Quote:

Originally Posted by 61K10

are they like the Honda ones? similar without the extra inside flap? anybody installed these on their tk? I have the Honda ones on my 61 and are a little short.

The one on the left is for the 60-66, the one on the right is for the 67-72 which shows the correct molded corner for these trucks.

These are both showing on Mike Losh's trucks. People have been extremely happy with the ease and fit of these parts. You could check out our Instagram feed below to see some of the customer's that have them on their trucks.

Derek

luvbowties · 03-16-2016, 01:30 PM

I've never used them, but check around for forum feedback/recommendation: only 1 instance I saw them used, if truck sat for 20 minutes, the top part would fall into your face, yet feel pretty secure when threaded back on. This set was v-e-r-r-r-y soft, and could have been a quite inferior design(?).
Sam

WOLFMANmike · 03-16-2016, 04:14 PM

Quote:

Originally Posted by luvbowties

I've never used them, but check around for forum feedback/recommendation: only 1 instance I saw them used, if truck sat for 20 minutes, the top part would fall into your face, yet feel pretty secure when threaded back on. This set was v-e-r-r-r-y soft, and could have been a quite inferior design(?).
Sam

so the honda ones are still the best fit and best at staying on then ?

chevy_mike · 03-16-2016, 06:53 PM

Quote:

Originally Posted by WOLFMANmike

so the honda ones are still the best fit and best at staying on then ?

Work great on my panel.

vince1 · 03-17-2016, 07:46 PM

I think I got mine from an 06 Honda civic 2dr. $4 at Pick n Pull half price sale. They sure are a lot better than the expensive crap I got from one of the vendors.

AUS64c10 · 03-17-2016, 09:52 PM

We don't have the that model of honda civic in australia so it's not really an option for me and if i have to buy new i thinks its best to get some made to suit the truck.

WOLFMANmike · 03-18-2016, 06:17 AM

Quote:

Originally Posted by AUS64c10

We don't have the that model of honda civic in australia so it's not really an option for me and if i have to buy new i thinks its best to get some made to suit the truck.

Ebay ? Online for that Honda civic .... I've see the seals on ebay . EBay delivers world wide

karlbenz · 03-18-2016, 03:52 PM

The seals off a square body are perfect length but the doors don't want to shut right

BigSix · 03-18-2016, 06:10 PM

The rockauto glue-on seals work nice. For about a week you have to really slam them but then they fit super nice and tight.

03-16-2016, 06:03 AM	#1
AUS64c10 Registered User Join Date: Feb 2013 Location: Melbourne, Australia Posts: 88	Where to buy - Push on door seals I know Precision Restoration Parts is now making push on door seals for 63 -66 c10's that don't need to be glued like the original ones but does any one know where to buy these from? I can't find them for sale anywhere.

03-16-2016, 07:03 AM	#2
Ronw435 Registered User Join Date: Apr 2014 Location: Fate, Texas ( About 35 miles east of Dallas) Posts: 318	Re: Where to buy - Push on door seals 1997 Honda Civic. I believe a two door. There are threads on here about it. Fits like a glove!!

03-16-2016, 07:35 AM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Where to buy - Push on door seals One of the vendors here had them listed a while back. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

03-16-2016, 10:04 AM	#4
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,781	Re: Where to buy - Push on door seals GMC Paul's has them. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

03-16-2016, 12:52 PM	#7
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Where to buy - Push on door seals are they like the Honda ones? similar without the extra inside flap? anybody installed these on their tk? I have the Honda ones on my 61 and are a little short. __________________ 1961 chevy K10 my build is------------61K10 build

03-16-2016, 01:30 PM	#9
luvbowties Registered User Join Date: Feb 2009 Location: southeasternfoothillsofusa Posts: 1,557	Re: Where to buy - Push on door seals I've never used them, but check around for forum feedback/recommendation: only 1 instance I saw them used, if truck sat for 20 minutes, the top part would fall into your face, yet feel pretty secure when threaded back on. This set was v-e-r-r-r-y soft, and could have been a quite inferior design(?). Sam

03-17-2016, 07:46 PM	#12
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,169	Re: Where to buy - Push on door seals I think I got mine from an 06 Honda civic 2dr. $4 at Pick n Pull half price sale. They sure are a lot better than the expensive crap I got from one of the vendors.

03-17-2016, 09:52 PM	#13
AUS64c10 Registered User Join Date: Feb 2013 Location: Melbourne, Australia Posts: 88	Re: Where to buy - Push on door seals We don't have the that model of honda civic in australia so it's not really an option for me and if i have to buy new i thinks its best to get some made to suit the truck.

03-18-2016, 03:52 PM	#15
karlbenz Registered User Join Date: Nov 2008 Location: kannapolis, nc Posts: 526	Re: Where to buy - Push on door seals The seals off a square body are perfect length but the doors don't want to shut right __________________ 2000 c3500 utility bed 7.4l 5sp manual old body style. Cab and chassis 1964 GMC K10 383cu in/sm465/twin stick np205 1965 Chevy C60

03-18-2016, 06:10 PM	#16
BigSix Registered User Join Date: Mar 2014 Location: MD/VA/PA Or Inbetween Posts: 413	Re: Where to buy - Push on door seals The rockauto glue-on seals work nice. For about a week you have to really slam them but then they fit super nice and tight.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.