KS Pre Mothers Day sale 67-72 truck parts

[teeitup]

These are ALL used parts, this is all the parts I have right now, if there isn't a pic of part I don't have it. (EDIT) I did forget to get pics of steering columns, blazer gas tank straps and 7 inch 6 lug ralley wheel and 2 4x4 blazer rearends) Sorry for some bad pics, its dark in my storade building and my camera is broke (can only see half the pic when taking it). I just returned from swap meet and this is all that is left. It is getting into my busy time of year at my real job so I thought I'd run one more add to try to clean out some more parts, its also getting hard to find trucks around here anymore to part. I will try to price parts best I can, as you will see there is alot of parts to try to price. I will take pay pal if you pay the fees, for this one period of time, I usually only take money orders. I ship fed ex and USPS and charge what they charge me. ASK ALL questions in thread. I can better pics of a part if you'd like, just ask, then I will give 24 hours for you to respond then go to next buyer. I'll do group purchases to try to clean out some parts. Thanks Randy

(1+2)Bucket seats and extra foam, no brackets $225 plus shipping
3) drivers door, not bad, no ship $30
4) 67 hood, not bad, no ship $30, hatch isn't the best $50 no ship,
5) rear blazer 4x4 drive shafts $20 plus ship (one sold), also K20 rear drive shaft $60 plus ship, 67-68 front grill rock guards

[teeitup]

1) 68-71 ARM REST AND 72 DRIVERS ARM REST
2) 4X4 trans frame bracket, partial heat shields and tubes
3) dual front stablizer shock setup for 4x4, fan clutch
4) tach, not our years and gas pedal setup
5) big block brake booster vent hoses

[teeitup]

1) 2 Big block ac brackets and cab heat shield
2) 4x4 clutch linkage, 4x4 transfer case mount, 4x4 transfer case shifter pin, sport mirror brackets, spare tire holder nuts
3) 67-68 alt brackets, 67-70 mirror brackets, single fan pulley, 2 big block dipsticks
4) taillight and blackup light housings, and 69-70 turn signals housings
5) 2 transmission speedo gear reducers, 67-68 horn cap (sold), 67 emergency brake cover, double groove fan pulley, 400 emblems (one pair sold)

[teeitup]

1) misc small block AC brackets, I almost complete set
2) 4 good AC controls. tailgate chrome pieces (2 sold), 67-70 gas pedal trim, 71-72 grill emblem chrome, 69-70 hood emblem (sold), tool box trim
3) 4 broken AC controls, all have one broken arm, AC control brackets, fan switch
4) 4 speed shifter rings, 4 core upper and lower rad holders (lowers sold),
5) steering column shaft, 4 speed shifter (sold), power gide shift linkage, 69 chevy manual, new steering box arm,

[pimpston65]

Originally Posted by teeitup

1) 68-71 ARM REST AND 72 DRIVERS ARM REST
2) 4X4 trans frame bracket, partial heat shields and tubes
3) dual front stablizer shock setup for 4x4, fan clutch
4) tach, not our years and gas pedal setup
5) big block brake booster vent hoses

how much for the tach,brake booster plug and hose, green speaker plug,red radio power wire? 48180 thks can u post a better pic of the tack front and back please and thank u...

[teeitup]

1) valve cover sets, small bock power sterring pump with one bracket, it does not have the rear bracket that goes to the moutor mount
2) driver side small block exhaust manifolds, 305 V6 exhaust manifolds
3) small block motor stands, I6 motor stands, 71-72 turn signal housings (sold), one upper front bumper bracket, speedo
4) headlight switches. wiper switches, 67 ign switch no key, ash trays
5) speaker brackets

[teeitup]

1) lighter deletes
2) 72 door handle latch
3) ign spacers, bat holddowns, hand throttle pieces
4) tailgate band letters
5) AC switches, heater switches, misc cargo light stuff

[teeitup]

1) speaker wires
2) dual horn wires
3) horn caps
4) shifter handles
5) misc steering column pieces

[teeitup]

1) clutch blockoff covers
2) 67 knobs (sold) and radio chrome pieces
3) visor clips
4) jam vents, glove box door latches, 72 door screws
5) turbo 400 kickdown switch, 4 speed shifter knobs

[teeitup]

1) brake and gas pedal trim
2) sidemarkers
3) tower hose clamps
4) misc
5) misc

[haskell]

Originally Posted by teeitup

1) valve cover sets, small bock power sterring pump with one bracket, it does not have the rear bracket that goes to the moutor mount
2) driver side small block exhaust manifolds, 305 V6 exhaust manifolds
3) small block motor stands, I6 motor stands, 71-72 turn signal housings (sold), one upper front bumper bracket, speedo
4) headlight switches. wiper switches, 67 ign switch no key, ash trays
5) speaker brackets

Do you still have the two ash trays? I would take both going to 46240. Please pm with my other request.

Thanks,

[cxune]

Lots of stuff!

How much for a taillight lens for a '71 GMC fleetside- cheapest one that isn't cracked or bubbled? ..shipped to 77375.

Thanks-

[teeitup]

1) misc
2) radio wiring
3) horn guts
4) wiper knobs
5) headlight knobs

[teeitup]

1) 307 throttle cable holder, steering column wire connector
2) Shroud clips
3) cigarette lighter assemblies (2 good ones sold and 67 lighter sold)
4) cig lighter wiring
5) lens

[teeitup]

1) radio non AC patch
2) gmc pieces
3) stepside pieces
4) glove box doors
5) 72 door panel

[teeitup]

1) kent moore specail tools (sold)
2) lugnuts
3) speakers for cores
4) defrost vents
5) tailgate hinges and trunions

[teeitup]

1) door and window cranks
2) misc trim
3) visors
4) HEI's
5) torque convertor covers

[rjmose]

how much are you asking for the turn signal assemblies in pic # 13 top right ? thanks ramose

[JimH2828]

I'm interested in:
1) Blue Chevy bowtie - if it's a 69\70 hood type.
2) 1x glove box lock with holder bracket and screw.
3) 2x blue rear view mirror clip.
4) There aren't any blue rear bench seat arm rests in the container, is there?

Price and better pics please.

Thanks
JimH2828

[JimH2828]

Your were not kidding, the pics keep coming. I'm adding to my list
5) Is that nicer T-3 headlight a 12V, 7", 3 prong (low and high beam) bulb?
6) Do you have any of those small plastic boot covers that go over the end of the seat belt metal ends, were the bolt goes through? Interested in blue and black.
7) Chrome steering column gear indicator with clear plastic and white lettering gears with two screws........for automatic TH350, looking for the L2 and L1 labeling

Thanks
JimH2828

[ztk123]

Are those bright red dash defrost vents pictured in the bucket? If so are they red on the top surface as well. Do you happen to have any red ac vent/balls available?
Thanks,
Mike
Posted via Mobile Device

[teeitup]

Maddoxdb, here are belts $27 shipped plus pay pal fee

[teeitup]

2 belts are frayed

[CUSTOM/10]

Randy;

Do you have a very nice set of paint divider trim pieces. Something that has no dents, and if polished up would look like new ?

Gary

[cudaman]

Randy: Back again
Post #18 photo, 4 & 5 has two chrome trim strips, that I think go on the top of the door panels on a blazer/jimmy. do you still have them?