what are these called? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67sss** · 03-16-2009, 10:27 PM

No prizes offered for the correct answer!

Joe67 · 03-16-2009, 10:29 PM

Blinker fluid tank retainers

**LockDoc** · 03-16-2009, 10:37 PM

-
Those are check straps to control engine roll. The humped bracket bolts to the frame rail and the cable fastens to it and bolts to the engine.

LockDoc

Longhorn Man · 03-16-2009, 10:39 PM

yep, that was installed per a recall for broken motor mounts

**67sss** · 03-16-2009, 10:59 PM

thanks

stockish shawn · 03-16-2009, 11:02 PM

what years and engine options, Ive had three a 68 69 & 70 never seen them before but it makes sense

Critter · 03-16-2009, 11:06 PM

I just pulled a set off of my 69 parts truck...350/th400 1/2ton lwb. I think alot of people probably pulled them off years ago when the motor was rebuilt. Plus if you use the new interlocking style motor mounts, you don't need them anyway.

dwcsr · 03-16-2009, 11:08 PM

late 60's early 70's. That was a short lived recall until they redesigned the motor mount to the safety mount and then that was the replacement part. If you had a linkage type gas pedal you got that strap setup. Cable type pedals did'nt have the WOT problem.

03-16-2009, 10:27 PM	#1
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	what are these called? No prizes offered for the correct answer! Attached Images

03-16-2009, 10:29 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: what are these called? Blinker fluid tank retainers __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

03-16-2009, 10:37 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,648	Re: what are these called? - Those are check straps to control engine roll. The humped bracket bolts to the frame rail and the cable fastens to it and bolts to the engine. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-16-2009, 10:39 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: what are these called? yep, that was installed per a recall for broken motor mounts

03-16-2009, 10:59 PM	#5
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	Re: what are these called? thanks

03-16-2009, 11:02 PM	#6
stockish shawn Registered User Join Date: Mar 2009 Location: paso robles ca. Posts: 20	Re: what are these called? what years and engine options, Ive had three a 68 69 & 70 never seen them before but it makes sense

03-16-2009, 11:06 PM	#7
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: what are these called? I just pulled a set off of my 69 parts truck...350/th400 1/2ton lwb. I think alot of people probably pulled them off years ago when the motor was rebuilt. Plus if you use the new interlocking style motor mounts, you don't need them anyway. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

03-16-2009, 11:08 PM	#8
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: what are these called? late 60's early 70's. That was a short lived recall until they redesigned the motor mount to the safety mount and then that was the replacement part. If you had a linkage type gas pedal you got that strap setup. Cable type pedals did'nt have the WOT problem.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.