GMC cab/clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblockorange · 03-25-2007, 10:38 PM

This is a 1971 GMC cab and front clip It's a three speed truck with the pedals and shifter hole in the floor. Also a 71 chevy cab they are complete inside and out seat,tank, column ect. Last chance they are going to the scrap yard! don't miss out if you need anythong off these 2 cabs $250 CASH! I do not ship small parts !!!

sorestgore · 03-25-2007, 10:51 PM

cute kid man, too bad i don't have extra cash, i'd pick that up in a second, i NEED a new cab, or at least the floor!

bigblockorange · 03-26-2007, 09:37 AM

Thanks for looking at it. Just to let you know it is complete seat, column,tank the works everything goes with it. BigBlockOrange started out 10x's worse than this cab. I didn't know it was easier to change a dash to A/C then to replace the whole floor. A lesson learned

DMARCUM123 · 03-26-2007, 04:05 PM

what about the bed

1lowdiesel · 03-26-2007, 04:17 PM

yea what about the bed??

bigblockorange · 03-27-2007, 02:09 AM

I still have the sides may let them go too! Might just sell all this stuff, can't find any girls into old Chevy anymore. You can't haul a** if you can't find it!!

bigblockorange · 03-28-2007, 02:00 AM

I have extra parts to go with the cab and clip, front frame rails and a 71 chevy cab you can pull parts off of, it has a good roof.

68caliRat · 03-28-2007, 02:49 AM

Damn I wish you were in CA with that! Shipping would kill me..

DMARCUM123 · 03-28-2007, 08:24 PM

do u have the floor

bigblockorange · 03-29-2007, 02:44 AM

Quote:

Originally Posted by DMARCUM123

do u have the floor

Sorry I used the floor.

burban70 · 03-28-2007, 10:07 PM

How long can you hold it before it needs to be picked up?

bigblockorange · 03-29-2007, 02:36 AM

Quote:

Originally Posted by burban70

How long can you hold it before it needs to be picked up?

no hurry I have it until trucks at Carlisle and it will sell, but I like the club and the members if you need it you can come up anytime and get it. No games or jokes I'd keep it if I didn't have 10 other trucks to build. My buddy drove it in Highschool and I bought it just for the floor and frame. I'm looking for a viper, yes a Mopar sorry to say. Anyone know of one for sale?

1lowdiesel · 03-29-2007, 04:12 PM

so what about the bed. pm if ya want.

bigblockorange · 03-30-2007, 01:11 AM

I bought the truck for the bed floor and frame the rest can go I sold the motor and trans. I drove the truck into the driveway. So if you need the rest let me know I do have the bedsides in the picture with the gate to sell aswell.

bigblockorange · 03-31-2007, 03:05 AM

I have other part to go with the cab and clip. I may sell a frame W/ 5 lug disc brakes

bigblockorange · 04-01-2007, 08:30 AM

good news I have a roof to go with the GMC cab of a 71 chavy The roof on the GMC cab is good if you like sunroofs

bigblockorange · 04-01-2007, 07:37 PM

I'm willing to trade!!!!!!!!!!!!!

bigblockorange · 04-03-2007, 02:45 AM

I picked up the bedsides today, if anyone needs any of these parts let me know. I may start another build soon. I got a line on a 69 GMC tow truck that needs a cab BBO

bigblockorange · 04-04-2007, 02:16 AM

doesn't anyone live near PA into old trucks?

Bowtie001 · 04-04-2007, 12:39 PM

Are you going to part out the front clip? A bunch of parts there sounds nice...

vjthibeault · 04-04-2007, 04:06 PM

sent you a pm thanks

bigblockorange · 04-05-2007, 02:16 AM

I will part the truck out if I have to what do you need?

short step · 04-05-2007, 06:22 AM

where in pa are u? how much for the 71 roof
bob

1lowdiesel · 04-05-2007, 09:12 AM

pm sent too

Bowtie001 · 04-05-2007, 10:15 AM

I'd like a price on both headlight buckets and the side pieces of the grill surround.

Thanks!

03-25-2007, 10:38 PM	#1
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	GMC cab/clip w/chevy cab,frame,bed This is a 1971 GMC cab and front clip It's a three speed truck with the pedals and shifter hole in the floor. Also a 71 chevy cab they are complete inside and out seat,tank, column ect. Last chance they are going to the scrap yard! don't miss out if you need anythong off these 2 cabs $250 CASH! I do not ship small parts !!! Attached Images Last edited by bigblockorange; 10-25-2007 at 06:20 AM. Reason: added parts

03-25-2007, 10:51 PM	#2
sorestgore Official C-10 Destroyer Join Date: Jan 2007 Location: Menomonie, WI Posts: 72	Re: GMC cab/clip cute kid man, too bad i don't have extra cash, i'd pick that up in a second, i NEED a new cab, or at least the floor! __________________ 5 miles to a gallon, and lovin it! Deceased: 1972 C10 Stepside, 350ci smallblock, Edelbrock 750 performer carb, Edelbrock Performer RPM manifold, DynaMax headers, Thrush glasspacks, flame-throwers!

03-26-2007, 09:37 AM	#3
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip Thanks for looking at it. Just to let you know it is complete seat, column,tank the works everything goes with it. BigBlockOrange started out 10x's worse than this cab. I didn't know it was easier to change a dash to A/C then to replace the whole floor. A lesson learned

03-26-2007, 04:05 PM	#4
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: GMC cab/clip what about the bed

03-26-2007, 04:17 PM	#5
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: GMC cab/clip yea what about the bed?? __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-27-2007, 02:09 AM	#6
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I still have the sides may let them go too! Might just sell all this stuff, can't find any girls into old Chevy anymore. You can't haul a** if you can't find it!!

03-28-2007, 02:00 AM	#7
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I have extra parts to go with the cab and clip, front frame rails and a 71 chevy cab you can pull parts off of, it has a good roof.

03-28-2007, 02:49 AM	#8
68caliRat Need a bigger hammer.. Join Date: Feb 2007 Location: Escondido,CA. Posts: 280	Re: GMC cab/clip Damn I wish you were in CA with that! Shipping would kill me.. __________________ 1968 GMC 3/4 LWB fleetside Custom Camper 2018 Silverado High Country 2500HD Duramax 4X4

03-28-2007, 08:24 PM	#9
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: GMC cab/clip do u have the floor

03-28-2007, 10:07 PM	#11
burban70 Registered User Join Date: Nov 2005 Location: birmingham, al Posts: 39	Re: GMC cab/clip How long can you hold it before it needs to be picked up?

03-29-2007, 04:12 PM	#13
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: GMC cab/clip so what about the bed. pm if ya want. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-30-2007, 01:11 AM	#14
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I bought the truck for the bed floor and frame the rest can go I sold the motor and trans. I drove the truck into the driveway. So if you need the rest let me know I do have the bedsides in the picture with the gate to sell aswell.

03-31-2007, 03:05 AM	#15
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I have other part to go with the cab and clip. I may sell a frame W/ 5 lug disc brakes

04-01-2007, 08:30 AM	#16
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip good news I have a roof to go with the GMC cab of a 71 chavy The roof on the GMC cab is good if you like sunroofs

04-01-2007, 07:37 PM	#17
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I'm willing to trade!!!!!!!!!!!!!



Register or Log In To remove these advertisements.

04-03-2007, 02:45 AM	#18
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I picked up the bedsides today, if anyone needs any of these parts let me know. I may start another build soon. I got a line on a 69 GMC tow truck that needs a cab BBO

04-04-2007, 02:16 AM	#19
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip doesn't anyone live near PA into old trucks?

04-04-2007, 12:39 PM	#20
Bowtie001 Project underway - finally. Join Date: Feb 2007 Location: Greenville, SC Posts: 493	Re: GMC cab/clip Are you going to part out the front clip? A bunch of parts there sounds nice... __________________ 1972 GMC Pre-resto... awaiting allocated funding.

04-04-2007, 04:06 PM	#21
vjthibeault NH Join Date: Mar 2005 Location: southern NH Posts: 50	Re: GMC cab/clip sent you a pm thanks

04-05-2007, 02:16 AM	#22
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: GMC cab/clip I will part the truck out if I have to what do you need?

04-05-2007, 06:22 AM	#23
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: GMC cab/clip where in pa are u? how much for the 71 roof bob

04-05-2007, 09:12 AM	#24
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: GMC cab/clip pm sent too __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

04-05-2007, 10:15 AM	#25
Bowtie001 Project underway - finally. Join Date: Feb 2007 Location: Greenville, SC Posts: 493	Re: GMC cab/clip I'd like a price on both headlight buckets and the side pieces of the grill surround. Thanks! __________________ 1972 GMC Pre-resto... awaiting allocated funding.

Register or Log In To remove these advertisements.