Drip Rails Leaking - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1STtimePRo'71 · 10-01-2005, 03:39 PM

Can somebody direct me to a thread on redoing the caulking in the drip rails. Mine have been leaking for some time now and need to do some reading first before I wreck something. Oh and speaking of wrecking things, how do I remove my interior door handles and window cranks CORRECTLY without wrecking those too?

**pjmoreland** · 10-01-2005, 04:04 PM

Here's a thread I saved:

http://67-72chevytrucks.com/vboard/s....php3?t=167024

1STtimePRo'71 · 10-01-2005, 04:15 PM

Thanks for that link, anybody know anything about removing the interior door handles so that I can redo my doors?

larry may · 10-01-2005, 04:23 PM

Auto parts stores sell kd BRAND NAME TOOLS. There is a pliers flat type that will enable you to get in between the panel and the window and door handle to remove the retainer clips. .

1STtimePRo'71 · 10-01-2005, 05:23 PM

Ok I think I know what your talking about. Thanks

55chevy · 10-01-2005, 09:07 PM

I have a can/bottle opener, I bent the pointy can opener end up into a J, it works good to reach that retainer clip.

chevymad · 10-01-2005, 10:30 PM

You can also take a shop rag and drag it behind the window crank. If you drag it in the right direction it will snag the end of the clip and pull it out.

69 Short Fleet · 10-02-2005, 02:03 AM

When you reinstall the handles install the small "c-clips first then push the handles on, makes it way easier. Doug

OhioDan · 10-02-2005, 05:56 AM

Found this on e-bay. Ya might wanna check your local parts store, they probably sell the same thing?

http://cgi.ebay.com/ebaymotors/67-72...04367265QQrdZ1

Hope this helps?

1STtimePRo'71 · 10-02-2005, 09:00 AM

Great Info Guys thanks alot!

muddpile · 10-02-2005, 03:08 PM

I have that exact tool Ohio Dan posted. Works awesome!

1STtimePRo'71 · 10-02-2005, 03:11 PM

I bought one this morning off evilbay.

10-01-2005, 03:39 PM	#1
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Drip Rails Leaking Can somebody direct me to a thread on redoing the caulking in the drip rails. Mine have been leaking for some time now and need to do some reading first before I wreck something. Oh and speaking of wrecking things, how do I remove my interior door handles and window cranks CORRECTLY without wrecking those too? __________________ -Cory 1967 2 Wheel Chevy

10-01-2005, 04:15 PM	#3
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Thanks for that link, anybody know anything about removing the interior door handles so that I can redo my doors? __________________ -Cory 1967 2 Wheel Chevy

10-01-2005, 05:23 PM	#5
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Ok I think I know what your talking about. Thanks __________________ -Cory 1967 2 Wheel Chevy

10-01-2005, 09:07 PM	#6
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	I have a can/bottle opener, I bent the pointy can opener end up into a J, it works good to reach that retainer clip. __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer

10-01-2005, 10:30 PM	#7
chevymad Registered User Join Date: Jan 2001 Location: skamokawa, WA, USA Posts: 527	You can also take a shop rag and drag it behind the window crank. If you drag it in the right direction it will snag the end of the clip and pull it out. __________________ 70 C10 long fleet, 355/200 4r, 6 lug disc conversion, 3" drop 70 gmc changed to 67/8 chevy, 454 with voodoo cam, th400, all 74 running gear.. in progress

10-01-2005, 04:04 PM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,789	Here's a thread I saved: http://67-72chevytrucks.com/vboard/s....php3?t=167024

10-01-2005, 04:23 PM	#4
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Auto parts stores sell kd BRAND NAME TOOLS. There is a pliers flat type that will enable you to get in between the panel and the window and door handle to remove the retainer clips. .

10-02-2005, 02:03 AM	#8
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	When you reinstall the handles install the small "c-clips first then push the handles on, makes it way easier. Doug

10-02-2005, 05:56 AM	#9
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Removing Window Cranks and Handles Found this on e-bay. Ya might wanna check your local parts store, they probably sell the same thing? http://cgi.ebay.com/ebaymotors/67-72...04367265QQrdZ1 Hope this helps? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

10-02-2005, 09:00 AM	#10
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Great Info Guys thanks alot! __________________ -Cory 1967 2 Wheel Chevy

10-02-2005, 03:08 PM	#11
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	I have that exact tool Ohio Dan posted. Works awesome! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

10-02-2005, 03:11 PM	#12
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I bought one this morning off evilbay. __________________ -Cory 1967 2 Wheel Chevy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.