Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-23-2011, 06:56 PM | #1 |
8848stro
Join Date: Mar 2010
Location: Halifax,pa
Posts: 63
|
71 outside door handles
Does anyone know if the holes to bolt handles on are on an angle?I have bought 2 sets and the holes are on a 45 degree angle.This does not make sense because the handles are already angled.I would think the the bolt holes would be straight because the inside of door panel is straight.If you try to put bolts on the angled handles the bolts are crooked.These handles i bought weremade in Taiwan.Any ideas-or am i missing something!
|
09-23-2011, 07:12 PM | #2 |
Project Junkie! Fishing Poor!!
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: 71 outside door handles
That should be correct. The washer needs to stay parallel to the casting. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
09-23-2011, 07:29 PM | #3 |
8848stro
Join Date: Mar 2010
Location: Halifax,pa
Posts: 63
|
Re: 71 outside door handles
So in other words-the washer will be parallel but the bolt will be on an angle?
|
09-23-2011, 11:17 PM | #4 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,745
|
Re: 71 outside door handles
67 doors and handles were different.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
09-24-2011, 03:48 PM | #5 |
8848stro
Join Date: Mar 2010
Location: Halifax,pa
Posts: 63
|
Re: 71 outside door handles
So does anybody know where i can get correct handles?
|
09-24-2011, 04:19 PM | #6 |
Roadtrip!
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,745
|
Re: 71 outside door handles
Is there a chance you have 67 doors? The 67 handles had bolts going straight in and the doors had a plate in there to accept them. I don't think the 67 handles are reproed at all. I believe all the aftermarket handles would be the 68-72 style. (angle bolts.)
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
09-26-2011, 03:56 PM | #7 |
Registered User
Join Date: Sep 2011
Location: Greencastle, IN
Posts: 132
|
Re: 71 outside door handles
Both bolts are at a slight angle to be flush with the door stamping. You should have no issues bolting these right in.
|
09-26-2011, 08:55 PM | #8 |
8848stro
Join Date: Mar 2010
Location: Halifax,pa
Posts: 63
|
Re: 71 outside door handles
OK-these look like the angle is not bad-they should work.Found out i can maybe stud it and bend with the angled handles.If this doesnt work i`ll be in touch!Thank you for the input!
|
Bookmarks |
|
|