selling off street strip project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 09-12-2005, 10:52 PM

I hate to do it but I have decided to sell off the street strip truck Parts to finish the Drag Truck I need to invetory it all and take some pics but I'll try to Run down some of it!

Autometer Tach $80.00
Autometer Speedo $80.00
Several Autometer Gauges

New Tinted (in the glass tinted) side windows w/vents and Rear Glass $225.00 would be hard to ship

Nine inch Ford Rearend nodular center section Aluminum pinion support 35 spline spool New Moser Axles large drive studs new housing ends new 4.30 gears sandblasted housing New Strange Engineering 4 Piston Disc brake kit $1900.00

Factory Truck tilt for a floor shifter $400.00

Fleetside short bed with new aftermarket (thicker) tailgate $600.00

I have 3 short bed frames 2 are trailing arm one is leaf spring $150.00 Ea

Like new windsheild $75.00

2 small block complete motors (buildable) $200.00 each

Turbo 400 (buildable) $100.00

15x10 Centerline Telestars with 28x12.5 Mickey Thompson Sportsman Pro's $250.00

71 Air Cab has had lots of body work done needs more $500.00

Djm Tubular Upper and Lower Control Arms 2.5inches of drop come with new coilsprings and shocks $500.00

Hal Coilovers Rear Adjustable $250.00 W/springs

New Kirkey Aluminum Seat $75.00

S&W Prebent Roll Cage Kit it's either 8 or 10 point can't remember $250.00

Many more small parts!

djracer · 09-12-2005, 10:54 PM

I forgot a complete 454 carb to pan fresh for $1500.00 It needs to be assembled can be bought for less apart!

**Tim Christian** · 09-12-2005, 10:56 PM

I would like to buy back the tilt. Give me a ring. Thanks Tim

70short/step · 09-12-2005, 11:08 PM

I would like the autometer gauges. Pics please!

djracer · 09-12-2005, 11:07 PM

Tim
Butter expressed some interest I'll call him first then you!

Thanks
Kevin

P.S. I have a buddy that want to get with you on some parts for his son's truck!

djracer · 09-12-2005, 11:11 PM

70 Short Step

I'll try to post pics of them tomorrow and find out exactly what I have!

mkundo · 09-13-2005, 12:06 AM

I would like to purchase the 9" N housing if your going to seperate. Also looking for a Detriot Locker for the same, 31 spline.
Thanks MK

Mad Dog · 09-13-2005, 08:13 AM

details on the 454 parts? Please and thank you...

68 short step · 09-13-2005, 08:22 AM

im instrested in the control arms. can you get pics please.

**ScottH** · 09-13-2005, 10:10 AM

Can u send pics of the bed? -> SDELVY55@aol.com

Thanks.

aitch · 09-13-2005, 11:49 AM

I'm interested in the tinted back glass. Possibly 9" parts if you break up the package.

djracer · 09-13-2005, 12:08 PM

2 new Goodmark Aftermarket doors $500.00

1 16 gal plastic fuel cell with sender, line and fuel filter $120.00

**w314speed** · 09-13-2005, 12:15 PM

Is the windshield original or a replacement? Any discoloration/cloudy around the edge?
Is it tinted? Shipping to 30127

mkundo · 09-13-2005, 03:28 PM

Have you made any discessions about breaking up the 9" ford rear?

meathead95 · 09-13-2005, 04:44 PM

details on the 454 please.

AesC10s · 09-13-2005, 05:59 PM

i migt be interested in the centerline rims with the m/t tires, but i would like to see some pics please. AAron

djracer · 09-13-2005, 06:15 PM

Sorry guys i'm in a hurry right now here are several pics!

Tinted glass is gone!

Tilt is gone.

Winsheild is gone (I broke it)

I added two sets of rear bumper brkts one still in the box $25.00 and $35.00.

Pretty new Chrome front bumper $100.00 with lights and brkts

Custom Console with cup holders $100.00

Dash plate and matching glovebox $75.00

2 Grant Steering Wheels $50.00ea

Turbo 350 Buildable $50.00

Autometer Shift lite uses interchangable Chips $50.00

6Lug aluminum wheels with centercaps and lugs $200.00

djracer · 09-13-2005, 06:19 PM

parts parts and more parts

djracer · 09-13-2005, 06:21 PM

More Parts

tomatocity · 09-13-2005, 06:50 PM

Sway bars! Tell me about the sway bars. Do you have all the brackets? shipped to 95820.

luisduran · 09-14-2005, 12:12 AM

put me in line for the gauges and console.thanks

djracer · 09-13-2005, 06:25 PM

More And More Parts

djracer · 09-13-2005, 06:26 PM

parts is parts

djracer · 09-13-2005, 06:28 PM

parts

djracer · 09-13-2005, 06:40 PM

Pics

09-12-2005, 10:52 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	selling off street strip project I hate to do it but I have decided to sell off the street strip truck Parts to finish the Drag Truck I need to invetory it all and take some pics but I'll try to Run down some of it! Autometer Tach $80.00 Autometer Speedo $80.00 Several Autometer Gauges New Tinted (in the glass tinted) side windows w/vents and Rear Glass $225.00 would be hard to ship Nine inch Ford Rearend nodular center section Aluminum pinion support 35 spline spool New Moser Axles large drive studs new housing ends new 4.30 gears sandblasted housing New Strange Engineering 4 Piston Disc brake kit $1900.00 Factory Truck tilt for a floor shifter $400.00 Fleetside short bed with new aftermarket (thicker) tailgate $600.00 I have 3 short bed frames 2 are trailing arm one is leaf spring $150.00 Ea Like new windsheild $75.00 2 small block complete motors (buildable) $200.00 each Turbo 400 (buildable) $100.00 15x10 Centerline Telestars with 28x12.5 Mickey Thompson Sportsman Pro's $250.00 71 Air Cab has had lots of body work done needs more $500.00 Djm Tubular Upper and Lower Control Arms 2.5inches of drop come with new coilsprings and shocks $500.00 Hal Coilovers Rear Adjustable $250.00 W/springs New Kirkey Aluminum Seat $75.00 S&W Prebent Roll Cage Kit it's either 8 or 10 point can't remember $250.00 Many more small parts! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-12-2005, 10:54 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	I forgot a complete 454 carb to pan fresh for $1500.00 It needs to be assembled can be bought for less apart! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-12-2005, 11:08 PM	#4
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	I would like the autometer gauges. Pics please! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

09-12-2005, 11:07 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Tim Butter expressed some interest I'll call him first then you! Thanks Kevin P.S. I have a buddy that want to get with you on some parts for his son's truck! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-12-2005, 11:11 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	70 Short Step I'll try to post pics of them tomorrow and find out exactly what I have! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-12-2005, 10:56 PM	#3
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I would like to buy back the tilt. Give me a ring. Thanks Tim

09-13-2005, 12:06 AM	#7
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	I would like to purchase the 9" N housing if your going to seperate. Also looking for a Detriot Locker for the same, 31 spline. Thanks MK

09-13-2005, 08:13 AM	#8
Mad Dog Registered User Join Date: Jun 2005 Location: Independence MO Posts: 87	details on the 454 parts? Please and thank you... __________________ 72 C10 longbed 5/7 drop, Telstars, 350/th400(for now) 69 Chevelle SS396 (427/th400) 88 K5 on 35's (355/700R4/208)

09-13-2005, 08:22 AM	#9
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	im instrested in the control arms. can you get pics please.

09-13-2005, 10:10 AM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Can u send pics of the bed? -> SDELVY55@aol.com Thanks.

09-13-2005, 11:49 AM	#11
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	I'm interested in the tinted back glass. Possibly 9" parts if you break up the package. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

09-13-2005, 12:08 PM	#12
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	2 new Goodmark Aftermarket doors $500.00 1 16 gal plastic fuel cell with sender, line and fuel filter $120.00 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 12:15 PM	#13
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Is the windshield original or a replacement? Any discoloration/cloudy around the edge? Is it tinted? Shipping to 30127

09-13-2005, 03:28 PM	#14
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Have you made any discessions about breaking up the 9" ford rear?

09-13-2005, 04:44 PM	#15
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	details on the 454 please. __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

09-13-2005, 05:59 PM	#16
AesC10s Chevy truck addict Join Date: Apr 2005 Location: Thornton Colorado Posts: 825	i migt be interested in the centerline rims with the m/t tires, but i would like to see some pics please. AAron

09-13-2005, 06:15 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	pics for now Sorry guys i'm in a hurry right now here are several pics! Tinted glass is gone! Tilt is gone. Winsheild is gone (I broke it) I added two sets of rear bumper brkts one still in the box $25.00 and $35.00. Pretty new Chrome front bumper $100.00 with lights and brkts Custom Console with cup holders $100.00 Dash plate and matching glovebox $75.00 2 Grant Steering Wheels $50.00ea Turbo 350 Buildable $50.00 Autometer Shift lite uses interchangable Chips $50.00 6Lug aluminum wheels with centercaps and lugs $200.00 Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 06:19 PM	#18
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	More stuff parts parts and more parts Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 06:21 PM	#19
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Parts More Parts Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 06:50 PM	#20
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	Sway bars! Tell me about the sway bars. Do you have all the brackets? shipped to 95820. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

09-14-2005, 12:12 AM	#21
luisduran Registered User Join Date: Mar 2005 Location: Tinley Park Il. Posts: 144	gauges put me in line for the gauges and console.thanks

09-13-2005, 06:25 PM	#22
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Parts More And More Parts Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 06:26 PM	#23
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	parts parts is parts Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 06:28 PM	#24
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	parts for days parts Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-13-2005, 06:40 PM	#25
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Bed Pics Pics Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.