I Need To Buy Now 4wd Frame Pieces! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 02-22-2008, 02:38 AM

See project forum and you will see why I need them now. I need the following:

205 transfer case crossmember
2 piece drive shaft carrier bearing crossmember
"J" shaped exhaust hangar
4wd power steering box core for exchange
sbc power steering pump and brackets for sbc with short pump

Frame is painted and I reaaly need to find the pieces to keep moving foward. Thanks

454_72_4X4 · 02-22-2008, 04:20 AM

I've got a crossmember out of a Blazer with a 4 speed and 205. I think it kinda rough though.
Goin to check out your build thread now.

Musclerodz · 02-22-2008, 10:45 AM

Quote:

Originally Posted by 454_72_4X4

I've got a crossmember out of a Blazer with a 4 speed and 205. I think it kinda rough though.
Goin to check out your build thread now.

If it is rough I will have to pass. This truck is too nice.

**jerry moss** · 02-22-2008, 11:02 AM

if you're going with a 205 instead of a rockwell t-221 you don't need the carrier bearing. '70 on up with the 205 used a one piece rear shaft.

Musclerodz · 02-22-2008, 12:54 PM

Quote:

Originally Posted by jerry moss

if you're going with a 205 instead of a rockwell t-221 you don't need the carrier bearing. '70 on up with the 205 used a one piece rear shaft.

I have a one piece drive shaft in it now. All I want the crossmember for is chassis rigidity.

Musclerodz · 02-22-2008, 09:25 PM

Bill, I checked my Blazer this morning and that one is correct. Let me know how you want paid.

Mike

454_72_4X4 · 02-22-2008, 12:29 PM

Quote:

Originally Posted by Musclerodz

If it is rough I will have to pass. This truck is too nice.

Yea, that's what I was thinkin.
If nothin else shows up I can get some pics and you can judge it.
I'm sure somebody here has a nice one though.

TTT for ya.

billsbowtie · 02-22-2008, 06:52 AM

is this what you need $50.00 plus about $20.00 for shipping.
if 454-72-4wd can't help you.

billsbowtie · 02-22-2008, 06:53 AM

pic.2

Musclerodz · 02-22-2008, 10:41 AM

Bill, what is that out of? Looks close but not correct. I think that may be the crossmember for a SM20/Rockwell set up?

billsbowtie · 02-23-2008, 12:35 AM

sending paypal info .

teeitup · 02-23-2008, 12:43 AM

Mike, I have a 4x4 box for $25 plus shipping. Thanks Randy

Musclerodz · 02-23-2008, 07:24 AM

Quote:

Originally Posted by teeitup

Mike, I have a 4x4 box for $25 plus shipping. Thanks Randy

Do you have pump and brackets as well? Shipping to 73109

Mike

billsbowtie · 02-23-2008, 08:41 AM

mike i may have and extra pump and brackets but not a 4wd steering box. if randy don't have one. are you useing the pump for a core? if you send paypal for the crossmember i can ship it out tomarrow.

Musclerodz · 02-23-2008, 09:33 AM

Quote:

Originally Posted by billsbowtie

mike i may have and extra pump and brackets but not a 4wd steering box. if randy don't have one. are you useing the pump for a core? if you send paypal for the crossmember i can ship it out tomarrow.

I will paypal first thing in the morning, I don't like to do it from my laptop.

Mike

billsbowtie · 02-23-2008, 09:53 AM

ok sounds good. i just thought you maybe wanting it soon and i have to ship some other stuff tomarrow and could go ahead and send it out also.

teeitup · 02-23-2008, 06:12 PM

Mike, sorry no pump and brackets right now. I'll get a quote after work, I got to take the box off a partial frame I have here. Thanks Randy

Musclerodz · 02-23-2008, 09:09 PM

Quote:

Originally Posted by billsbowtie

ok sounds good. i just thought you maybe wanting it soon and i have to ship some other stuff tomarrow and could go ahead and send it out also.

paypal sent

meathead95 · 02-24-2008, 04:04 AM

is this the exhaust bracket you need? 48 shipped. pm sent

Musclerodz · 02-25-2008, 10:02 AM

Quote:

Originally Posted by meathead95

is this the exhaust bracket you need? 48 shipped. pm sent

Nope, it literally looks like a hook. I will post another pic monday

billsbowtie · 02-24-2008, 06:34 AM

i shipped your part today i will pm you the tracking #.

meathead95 · 02-25-2008, 10:17 AM

i probably have it if i can see a pic of what you need

Musclerodz · 02-26-2008, 04:03 AM

search wtb exhaust bracket. It will pull the pic. Otherwise it will be Monday.

02-22-2008, 02:38 AM	#1
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	I Need To Buy Now 4wd Frame Pieces! See project forum and you will see why I need them now. I need the following: 205 transfer case crossmember 2 piece drive shaft carrier bearing crossmember "J" shaped exhaust hangar 4wd power steering box core for exchange sbc power steering pump and brackets for sbc with short pump Frame is painted and I reaaly need to find the pieces to keep moving foward. Thanks __________________ Mike Redpath Last edited by Musclerodz; 02-22-2008 at 09:27 PM.

02-22-2008, 04:20 AM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: I Need To Buy Now 4wd Frame Pieces! I've got a crossmember out of a Blazer with a 4 speed and 205. I think it kinda rough though. Goin to check out your build thread now. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

02-22-2008, 11:02 AM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,913	Re: I Need To Buy Now 4wd Frame Pieces! if you're going with a 205 instead of a rockwell t-221 you don't need the carrier bearing. '70 on up with the 205 used a one piece rear shaft. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-22-2008, 09:25 PM	#6
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: I Need To Buy Now 4wd Frame Pieces! Bill, I checked my Blazer this morning and that one is correct. Let me know how you want paid. Mike __________________ Mike Redpath

02-22-2008, 06:52 AM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: I Need To Buy Now 4wd Frame Pieces! is this what you need $50.00 plus about $20.00 for shipping. if 454-72-4wd can't help you. __________________ i have 67/72 chevy truck parts f/s.

02-22-2008, 06:53 AM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: I Need To Buy Now 4wd Frame Pieces! pic.2 __________________ i have 67/72 chevy truck parts f/s.

02-22-2008, 10:41 AM	#10
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: I Need To Buy Now 4wd Frame Pieces! Bill, what is that out of? Looks close but not correct. I think that may be the crossmember for a SM20/Rockwell set up? __________________ Mike Redpath

02-23-2008, 12:35 AM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: I Need To Buy Now 4wd Frame Pieces! sending paypal info . __________________ i have 67/72 chevy truck parts f/s.

02-23-2008, 12:43 AM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: I Need To Buy Now 4wd Frame Pieces! Mike, I have a 4x4 box for $25 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-23-2008, 08:41 AM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: I Need To Buy Now 4wd Frame Pieces! mike i may have and extra pump and brackets but not a 4wd steering box. if randy don't have one. are you useing the pump for a core? if you send paypal for the crossmember i can ship it out tomarrow. __________________ i have 67/72 chevy truck parts f/s.

02-23-2008, 09:53 AM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: I Need To Buy Now 4wd Frame Pieces! ok sounds good. i just thought you maybe wanting it soon and i have to ship some other stuff tomarrow and could go ahead and send it out also. __________________ i have 67/72 chevy truck parts f/s.

02-23-2008, 06:12 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: I Need To Buy Now 4wd Frame Pieces! Mike, sorry no pump and brackets right now. I'll get a quote after work, I got to take the box off a partial frame I have here. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-24-2008, 04:04 AM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: I Need To Buy Now 4wd Frame Pieces! is this the exhaust bracket you need? 48 shipped. pm sent Attached Images __________________ 72 2wd blazer 72 swb 4x4 Last edited by meathead95; 02-24-2008 at 08:51 AM.

02-24-2008, 06:34 AM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: I Need To Buy Now 4wd Frame Pieces! i shipped your part today i will pm you the tracking #. __________________ i have 67/72 chevy truck parts f/s.

02-25-2008, 10:17 AM	#22
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: I Need To Buy Now 4wd Frame Pieces! i probably have it if i can see a pic of what you need __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

02-26-2008, 04:03 AM	#23
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: I Need To Buy Now 4wd Frame Pieces! search wtb exhaust bracket. It will pull the pic. Otherwise it will be Monday. __________________ Mike Redpath Last edited by Musclerodz; 02-26-2008 at 04:05 AM.

Register or Log In To remove these advertisements.