![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
I need a brake!
Join Date: Jul 2002
Location: Nashville, TN
Posts: 474
|
Hedman header question
Been away for quite a while! I will have to catch up with all the long timers and get to know everyone else.
![]() I bought a set of Hedman 69090 headers yesterday. The passenger side went on without a problem, but obviously the clutch z-bar is interfering with the install on the driver side. I did some more research after the fact and the 69092 set looks like possible direct fit since the #7 pipe is bent differently. Anyone have any input on the 69092's as a direct fit? Answer: Hedman 69092 headers are a direct fit if you have a 3 speed column shift. 69090 ![]() 69092 ![]()
__________________
JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10 Last edited by cheatham; 02-23-2011 at 10:17 AM. |
![]() |
![]() |
![]() |
#2 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Hedman header question
Yes, if your truck was originally a V8 (factory position), you will need the 69092's. If you are mounted on I 6 stands with your sb, you can use the 69090's....post back that info, & I will show you how I did it
![]()
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2010
Location: Bayville NJ
Posts: 385
|
Re: Hedman header question
I'd love to see pics of this install as I had the same question last week. I too am trying to find a set of headers for a 350 4 speed combo that require little or no modifications
__________________
Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org |
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Jan 2011
Location: Austin, TX
Posts: 632
|
Re: Hedman header question
Quote:
I am wondering if moving mine will make the shorty headers not run into the front cross member.... Posted via Mobile Device
__________________
www.tomthetruck.blogspot.com <-- Aka build thread. |
|
![]() |
![]() |
![]() |
#5 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: Hedman header question
If you are mounted in factory sb spot, you can run an HEI....with enough clearance to turn your fist sideways & fit it tween the dis cap & firewall. if you are in I 6 spot, that HEI will fit.....but you will play he!! slidin your fingers tween the cap & firewall(dam tight!) CrazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
![]() |
![]() |
![]() |
#6 |
The oddest Todd around
Join Date: May 2004
Location: Miami, Florida
Posts: 1,418
|
Re: Hedman header question
I got Doug Thorley Tri Y's myself.
They were the only ones I could find that would fit angled spark plug wires.
__________________
"The greatest pleasure is to vanquish your enemies and chase them before you, to rob them of their wealth and see those dear to them bathed in tears, to ride their horses and clasp to your bosom their wives and daughters." Ghengis Khan IIOY??? |
![]() |
![]() |
![]() |
#7 |
I need a brake!
Join Date: Jul 2002
Location: Nashville, TN
Posts: 474
|
Re: Hedman header question
Answer: Hedman 69092 headers are a direct fit if you have a 3 speed column shift.
Thank you to Tennessee Speed Sport Here is a bad video from the cell phone if you can play 3gp. Hedman 69092 on 1971 C10 350
__________________
JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Feb 2014
Location: West Des Moines, IA
Posts: 3
|
Re: Hedman header question
Just to clarify, you had an issue installing on a manual shift truck? I just ordered these for my '71 c10 350 Auto .. really hoping all fits well.
__________________
Dirty Gerty ![]() |
![]() |
![]() |
![]() |
#9 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: Hedman header question
3 year old thread and the OP hasn't been active since 2011.
![]() The clearance issue with headers and manual rigs is the Z bar that actuales the clutch. The auto trucks don't have a Z bar. Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
Bookmarks |
|
|