Inner fenders - who makes the best one? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gigem · 09-22-2019, 01:40 PM

I need a passenger side inner fender for my 1972 GMC truck. Who makes the best one? And where is the best place to buy it? Shipping is expensive on this big bulky thing...

I don't have the time or ability to search for an original one. I need to go aftermarket.

Thanks

09-22-2019, 01:54 PM

GM makes the best ones— not hard to find good ones— even the passenger side

**71CHEVYSHORTBED402** · 09-23-2019, 08:58 PM

Quote:

Originally Posted by Martyt

GM makes the best ones— not hard to find good ones— even the passenger side

This. Don't know how easy they are to find, but they're worth the effort.

72c20customcamper · 09-24-2019, 11:23 AM

Originals are out there . I picked up a couple a few months ago. Came off a 70 burban from arizona

1972 C10 · 09-22-2019, 03:12 PM

Quote:

Originally Posted by Gigem

I need a passenger side inner fender for my 1972 GMC truck. Who makes the best one? And where is the best place to buy it? Shipping is expensive on this big bulky thing...

I don't have the time or ability to search for an original one. I need to go aftermarket.

Thanks

Try Classic Chevrolet Parts OKC, got mine there & at least freight was reasonable. I don't know if it's the best but fit well and looks right installed.

Gigem · 09-22-2019, 03:37 PM

I went ahead and got them from Summit. They are Goodmark units. Just easier, and shipping wasn't as bad as some of the other usual sites. Hope they fit OK!

1972 C10 · 09-22-2019, 06:22 PM

I would think Goodmark would, they are an Oldie in the game. Summit's freight is reasonable for you because they will probably ship from Arlington I only recently became aware that Summit carried resto parts. If you need a brkt. for your charcoal cannister, I have an extra. Shipping only, and that offer goes for anyone reading this.

toolboxchev · 09-22-2019, 11:23 PM

Try GMC Pauls, he carries a good reputation around here. If I know anything they are made by Tri-Plus.

**FirstOwner69** · 09-23-2019, 12:21 AM

Mine are Tri-Plus. They did require using a drift/punch to align some bolt holes with the fender holes. No big deal. They looked virtually identical to the original and actually weighed about a pound more.

67C10GS · 09-23-2019, 10:53 AM

i have dynacorn, they fit really well.

09-22-2019, 01:40 PM	#1
Gigem Registered User Join Date: Feb 2012 Location: Lakeway, TX Posts: 335	Inner fenders - who makes the best one? I need a passenger side inner fender for my 1972 GMC truck. Who makes the best one? And where is the best place to buy it? Shipping is expensive on this big bulky thing... I don't have the time or ability to search for an original one. I need to go aftermarket. Thanks __________________ 1972 GMC Sierra Grande (current truck) 1980 Chevy Stepside (gone) 1987 Chevy Blazer (gone) 1972 Chevelle SS Convertible (gone) 1973 Chevy Corvette (gone) 1967 Chevy Camaro (STOLEN!)

09-22-2019, 01:54 PM	#2
Martyt Guest Posts: n/a	Re: Inner fenders - who makes the best one? GM makes the best ones— not hard to find good ones— even the passenger side

09-24-2019, 11:23 AM	#4
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,641	Re: Inner fenders - who makes the best one? Originals are out there . I picked up a couple a few months ago. Came off a 70 burban from arizona Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

09-22-2019, 03:37 PM	#6
Gigem Registered User Join Date: Feb 2012 Location: Lakeway, TX Posts: 335	Re: Inner fenders - who makes the best one? I went ahead and got them from Summit. They are Goodmark units. Just easier, and shipping wasn't as bad as some of the other usual sites. Hope they fit OK! __________________ 1972 GMC Sierra Grande (current truck) 1980 Chevy Stepside (gone) 1987 Chevy Blazer (gone) 1972 Chevelle SS Convertible (gone) 1973 Chevy Corvette (gone) 1967 Chevy Camaro (STOLEN!)

09-22-2019, 06:22 PM	#7
1972 C10 Registered User Join Date: Oct 2013 Location: Amarillo, Texas Posts: 49	Re: Inner fenders - who makes the best one? I would think Goodmark would, they are an Oldie in the game. Summit's freight is reasonable for you because they will probably ship from Arlington I only recently became aware that Summit carried resto parts. If you need a brkt. for your charcoal cannister, I have an extra. Shipping only, and that offer goes for anyone reading this. __________________ 64 Chevy Suburban/Carryall 4x4 72 C10 Highlander LWB 34 Chevy 5 wdo Street Rod 64 Corvette Roadster w/AC 78 TransAm WS6 78 GMC Jimmy 2WD Slammed SOLD!

09-22-2019, 11:23 PM	#8
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Inner fenders - who makes the best one? Try GMC Pauls, he carries a good reputation around here. If I know anything they are made by Tri-Plus.

09-23-2019, 12:21 AM	#9
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,847	Re: Inner fenders - who makes the best one? Mine are Tri-Plus. They did require using a drift/punch to align some bolt holes with the fender holes. No big deal. They looked virtually identical to the original and actually weighed about a pound more.

09-23-2019, 10:53 AM	#10
67C10GS Registered User Join Date: Dec 2018 Location: Jerome, ID Posts: 77	Re: Inner fenders - who makes the best one? i have dynacorn, they fit really well. __________________ 1967 GMC C15 sb 6.0 lq4 pro daily. Named the “formula 10”



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.