Stuck shackle bolt help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevylemon · 01-09-2017, 06:15 AM

68 c30 how do I remove the rear, greasable, shackle bolts?

I've let it soak in pb blaster, used a torch, and a bfh. Won't budge.

**special-K** · 01-09-2017, 09:51 AM

Thin cutting wheel on a mini-grinder between hanger and shackle. It's tight and I have ended up cutting into the hanger a bit, then welded up. I have tried a sawzall with the best blades out there and let me tell you, don't even bother. Those are some hardass bolts!

El Dorado Jim · 01-10-2017, 11:29 PM

Quote:

Originally Posted by special-K

Thin cutting wheel on a mini-grinder between hanger and shackle. It's tight and I have ended up cutting into the hanger a bit, then welded up. I have tried a sawzall with the best blades out there and let me tell you, don't even bother. Those are some hardass bolts!

I have done it this way also

hamjet · 01-09-2017, 10:12 AM

Also, if you have a cutting torch setup you can heat the heck out of it and try turning the end of the shackle bolt thats sticking out with a pipe wrench..

Coley · 01-09-2017, 12:50 PM

...built tough to last, 45 years+ on....lol.
Not necessarily good news today tho' unfortunately

Coley

chevylemon · 01-10-2017, 10:49 PM

Originally to take it out was that one Allen pin and bump it out? Might just have to cut it out and use grade 10 bolts

**Steeveedee** · 01-10-2017, 11:40 PM

Quote:

Originally Posted by chevylemon

Originally to take it out was that one Allen pin and bump it out? Might just have to cut it out and use grade 10 bolts

Can you provide a reliable link to the description of Grade 10 bolts?

chevylemon · 01-12-2017, 09:44 AM

Quote:

Originally Posted by Steeveedee

Can you provide a reliable link to the description of Grade 10 bolts?

Metric grade 10.9 or your sae grade 8 are equivalent http://www.tessco.com/yts/customerse...bolt_grade.pdf

El Dorado Jim · 01-12-2017, 05:14 PM

I have only heard of grade 2,5 and 8 bolts unless you are talking aircraft grade or something like that, grade 8 is all you need.....do you know how to tell the different grades?

01-09-2017, 06:15 AM	#1
chevylemon Registered User Join Date: Feb 2016 Location: lebanon Posts: 9	Stuck shackle bolt help! 68 c30 how do I remove the rear, greasable, shackle bolts? I've let it soak in pb blaster, used a torch, and a bfh. Won't budge.

01-09-2017, 09:51 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: Stuck shackle bolt help! Thin cutting wheel on a mini-grinder between hanger and shackle. It's tight and I have ended up cutting into the hanger a bit, then welded up. I have tried a sawzall with the best blades out there and let me tell you, don't even bother. Those are some hardass bolts! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-09-2017, 10:12 AM	#4
hamjet Registered User Join Date: Apr 2013 Location: South Westerlo, New York Posts: 1,325	Re: Stuck shackle bolt help! Also, if you have a cutting torch setup you can heat the heck out of it and try turning the end of the shackle bolt thats sticking out with a pipe wrench.. __________________ Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.

01-09-2017, 12:50 PM	#5
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Stuck shackle bolt help! ...built tough to last, 45 years+ on....lol. Not necessarily good news today tho' unfortunately Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

01-10-2017, 10:49 PM	#6
chevylemon Registered User Join Date: Feb 2016 Location: lebanon Posts: 9	Re: Stuck shackle bolt help! Originally to take it out was that one Allen pin and bump it out? Might just have to cut it out and use grade 10 bolts

01-12-2017, 05:14 PM	#9
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Stuck shackle bolt help! I have only heard of grade 2,5 and 8 bolts unless you are talking aircraft grade or something like that, grade 8 is all you need.....do you know how to tell the different grades?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.