Some parts off the 9 trucks I've been parting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-12-2008, 06:22 AM

Ask and I'll price, I'm headed out in the 15 degree weather to parts some more this afternoon. Thanks Randy
glove box doors $7 each
small block motor stands $29 shipped a pair, have 6 pair here
visors $15 a pair plus ship

teeitup · 02-12-2008, 06:25 AM

PS pump and brackets $30 plus ship
gauge setups $25 plus ship each, I got 6 of them here
4 barrell carb sold to Chipflyer for $20

teeitup · 02-12-2008, 06:28 AM

silver gate $25, no ship
AT crossmember $30 plus ship
2wd ps boxes $25 plus ship
4 speed high hump $20 plus ship
sway bars $40 plus ship
storage box $30 plus ship
NO SHIPPING GRILLS
grills $125 for middle one
$100 for right
$100 for left

**Classic Bowties** · 02-12-2008, 06:54 AM

I pm'ed you another needed parts list, lmk and try and keep warm out there, Cb

jay_shy · 02-12-2008, 07:05 AM

Posted interest in the mirrors in the other thread.

Jason

teeitup · 02-12-2008, 08:20 AM

CB, I'll look at it and get with you
Jay_Shy, I deleted other thread, not sure what happened there. Anyway mirror heads are not the best, probably only good for parts to fix other mirrors.
Thanks Randy

kantista · 02-12-2008, 08:26 AM

Randy,
Any rear bumber brackets for a 68 c10 swb fleet.
Thanks,
Keith

**jaros44sr** · 02-12-2008, 08:33 AM

Randy, what are you asking for a Pass. side chrome strait vent window? J.

teeitup · 02-12-2008, 08:37 AM

Kantista, Keith, sorry none of those
Jaros44sr, Jim, I got a few wings around here. I'm going to have a separate thread on them this week. Thanks Randy

jay_shy · 02-12-2008, 09:05 AM

Thanks Randy, I will pass.

Jason

bigsnookmaster · 02-12-2008, 09:25 AM

How much for the tool stowage door,or is it the whole assembly?Thanks

Guy58 · 02-12-2008, 09:50 AM

I did not see any in the pictures you posted but with 9 trucks parting out it never hurts to ask. I am looking for a jack and lug wrench for my 1967 C10. Do you have any by chance?
Thanks,
Guy

teeitup · 02-12-2008, 10:12 AM

HI Guy, sorry none of those in them, Thanks Randy

**too much stuff** · 02-12-2008, 01:39 PM

Randy, tell me more about the toolbox door. How bad is it? Also, is bruce getting a frame from you?

teeitup · 02-12-2008, 01:40 PM

Eric, its got rust on bottom as you can see, I never tried to get it opened, I didn't want to bend it up. Yes Bruce bought a longhorn frame from me.

teeitup · 02-12-2008, 01:59 PM

gauge setups are all sold to Byrd!!!
bed Tool box setup is sold Toomuchstuff!!!
C-30 emblem is sold Toomuchstuff!!
Thanks Randy

teeitup · 02-13-2008, 09:46 AM

I just parted 2 more cabs and frontends, I'll be adding more pics hopefully Tues. Thanks Randy

Dylans72 · 02-13-2008, 11:11 AM

does any of the instrument panels have the tachometer in the middle?

trippin · 02-13-2008, 12:18 PM

randy are those the metal pieces that go under the cab mounts? also how nice is the 72 grill in the middle is it scratched up? thanks steve

teeitup · 02-13-2008, 01:19 PM

Dylans72, sorry no tachs
Trippin, Steve, not sure what your talking about on metal pieces? Sorry I don't ship grills. Thanks Randy

Luvlegs · 02-13-2008, 01:20 PM

Hey Randy - no rush but I'm looking for decent headliner trim and the linkage for a T400.
You sent me one parchment arm rest with the last 72 door panels - any chance you have another one?

Is that a single white visor and what's the date code on the white seat belts?
Thanks!

teeitup · 02-13-2008, 01:24 PM

The headliner trim isn't the best. I got a turbo 400 linkage off a 67 for $30 plus shipping. Only had one arm rest with those door panels, the drivers sides are usually bad. Yes I thats a single white visor, $10 for it. The seatbelts have all been cut off, not complete. Thanks Randy

custom72c20 · 02-13-2008, 02:16 PM

Hey Randy, do you still have the gold glove box door. I'm interested, but no rush. Bump for awesome seller. Thanks

teeitup · 02-13-2008, 10:30 PM

Nick, I think thats a green one, no gold ones. Also THANKS for the KIND words!! Thanks let me know, Randy

custom72c20 · 02-18-2008, 10:08 AM

Sorry I didn't get back with you sooner, my comp was having problems. I'll take the green one in the upper left of the first pic. Can you send me a pm on where to send the money through paypal again? Thanks again.

Nick

02-12-2008, 06:22 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Some parts off the 9 trucks I've been parting Ask and I'll price, I'm headed out in the 15 degree weather to parts some more this afternoon. Thanks Randy glove box doors $7 each small block motor stands $29 shipped a pair, have 6 pair here visors $15 a pair plus ship Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-12-2008 at 11:11 AM.

02-12-2008, 06:25 AM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting PS pump and brackets $30 plus ship gauge setups $25 plus ship each, I got 6 of them here 4 barrell carb sold to Chipflyer for $20 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-12-2008 at 11:13 AM.

02-12-2008, 06:28 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting silver gate $25, no ship AT crossmember $30 plus ship 2wd ps boxes $25 plus ship 4 speed high hump $20 plus ship sway bars $40 plus ship storage box $30 plus ship NO SHIPPING GRILLS grills $125 for middle one $100 for right $100 for left Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-12-2008 at 11:09 AM.

02-12-2008, 06:54 AM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,686	Re: Some parts off the 9 trucks I've been parting I pm'ed you another needed parts list, lmk and try and keep warm out there, Cb

02-12-2008, 07:05 AM	#5
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Some parts off the 9 trucks I've been parting Posted interest in the mirrors in the other thread. Jason

02-12-2008, 08:20 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting CB, I'll look at it and get with you Jay_Shy, I deleted other thread, not sure what happened there. Anyway mirror heads are not the best, probably only good for parts to fix other mirrors. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-12-2008, 08:26 AM	#7
kantista Registered User Join Date: Jan 2008 Location: Austin, Tx Posts: 18	Re: Some parts off the 9 trucks I've been parting Randy, Any rear bumber brackets for a 68 c10 swb fleet. Thanks, Keith

02-12-2008, 08:33 AM	#8
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,693	Re: Some parts off the 9 trucks I've been parting Randy, what are you asking for a Pass. side chrome strait vent window? J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-12-2008, 08:37 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting Kantista, Keith, sorry none of those Jaros44sr, Jim, I got a few wings around here. I'm going to have a separate thread on them this week. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-12-2008, 09:05 AM	#10
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Some parts off the 9 trucks I've been parting Thanks Randy, I will pass. Jason

02-12-2008, 09:25 AM	#11
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Some parts off the 9 trucks I've been parting How much for the tool stowage door,or is it the whole assembly?Thanks __________________ greg http://community.webshots.com/user/68406Stepside

02-12-2008, 09:50 AM	#12
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: Some parts off the 9 trucks I've been parting I did not see any in the pictures you posted but with 9 trucks parting out it never hurts to ask. I am looking for a jack and lug wrench for my 1967 C10. Do you have any by chance? Thanks, Guy

02-12-2008, 10:12 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting HI Guy, sorry none of those in them, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-12-2008, 01:39 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Some parts off the 9 trucks I've been parting Randy, tell me more about the toolbox door. How bad is it? Also, is bruce getting a frame from you? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-12-2008, 01:40 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting Eric, its got rust on bottom as you can see, I never tried to get it opened, I didn't want to bend it up. Yes Bruce bought a longhorn frame from me. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-12-2008, 01:59 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting gauge setups are all sold to Byrd!!! bed Tool box setup is sold Toomuchstuff!!! C-30 emblem is sold Toomuchstuff!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-13-2008, 09:46 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting I just parted 2 more cabs and frontends, I'll be adding more pics hopefully Tues. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-13-2008, 11:11 AM	#18
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: Some parts off the 9 trucks I've been parting does any of the instrument panels have the tachometer in the middle?

02-13-2008, 12:18 PM	#19
trippin Registered User Join Date: Feb 2008 Location: bethany ct Posts: 40	Re: Some parts off the 9 trucks I've been parting randy are those the metal pieces that go under the cab mounts? also how nice is the 72 grill in the middle is it scratched up? thanks steve

02-13-2008, 01:19 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting Dylans72, sorry no tachs Trippin, Steve, not sure what your talking about on metal pieces? Sorry I don't ship grills. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-13-2008, 01:20 PM	#21
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Some parts off the 9 trucks I've been parting Hey Randy - no rush but I'm looking for decent headliner trim and the linkage for a T400. You sent me one parchment arm rest with the last 72 door panels - any chance you have another one? Is that a single white visor and what's the date code on the white seat belts? Thanks! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

02-13-2008, 01:24 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting The headliner trim isn't the best. I got a turbo 400 linkage off a 67 for $30 plus shipping. Only had one arm rest with those door panels, the drivers sides are usually bad. Yes I thats a single white visor, $10 for it. The seatbelts have all been cut off, not complete. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-13-2008, 02:16 PM	#23
custom72c20 Registered User Join Date: Oct 2006 Location: Temecula,CA Posts: 309	Re: Some parts off the 9 trucks I've been parting Hey Randy, do you still have the gold glove box door. I'm interested, but no rush. Bump for awesome seller. Thanks __________________ Nick Old pic of my 72: http://img340.imageshack.us/my.php?image=img0435co5.jpg 04 Silverado Daily Driver 68 GMC short step http://67-72chevytrucks.com/vboard/s...d.php?t=379665 "I'll beat you to the gas station!!"

02-13-2008, 10:30 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Some parts off the 9 trucks I've been parting Nick, I think thats a green one, no gold ones. Also THANKS for the KIND words!! Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 02-14-2008 at 09:59 AM.

02-18-2008, 10:08 AM	#25
custom72c20 Registered User Join Date: Oct 2006 Location: Temecula,CA Posts: 309	Re: Some parts off the 9 trucks I've been parting Sorry I didn't get back with you sooner, my comp was having problems. I'll take the green one in the upper left of the first pic. Can you send me a pm on where to send the money through paypal again? Thanks again. Nick __________________ Nick Old pic of my 72: http://img340.imageshack.us/my.php?image=img0435co5.jpg 04 Silverado Daily Driver 68 GMC short step http://67-72chevytrucks.com/vboard/s...d.php?t=379665 "I'll beat you to the gas station!!"

Register or Log In To remove these advertisements.