CA Dummy Filler Neck/Tank Delete for 67-72 Trucks with Removed In-Cab Tank

[pjmoreland]

10/24/2024 Update - None available at this time. Two people are currently on the waiting list. I will make more when I have five people. Please contact me if you'd like to be added to the waiting list.

I can be reached at dummyfillernecks@gmail.com or send me a PM.

*******PRICING*******
Standard Unit $120 + $10.40 USPS Flat Rate Shipping
Accepted payment methods: Zelle, CashApp or Money Order
********************


Here's a video that shows the filler neck on my truck.

This is a blank filler neck that fills the hole left behind in the cab when the stock tank is eliminated, allowing you to retain the original look, and avoids the need to patch and repaint the cab. The parts have been sprayed with two-part epoxy satin black paint.

Included in the kit:

-Filler neck, shortened, 2-1/4" diameter
-Clamping Plate
-Cab grommet, 67-70 style (fits 71-72 cabs as well), made in USA
-Pan-head screws for clamping plate
-Pan-head screws for increased clamping (not usually necessary)

Installation instructions can be found here.

Note: you will need to provide your own 67-70 non-EEC gas cap, such as Stant 10623 available at O'Reilly for $9. I got my cap from GMCPauls. EDIT - Member D.B successfully used an OE 71-72 grommet with his dummy filler neck. EDIT2 - 71-72 caps do work after all.

As an option, the clamping plate is designed to have an AC power outlet connected to it for people who have an inverter in their truck and want a convenient way to plug external items into it. It's designed to work with Journeyman Pro HJP-5279 (not included). In order to install the outlet, a blanking plug must be removed from the clamping plate (drilling required), and the two mounting holes must be tapped to #8-32. Also, the four clamping plate screw holes must have 100° countersinks added so that 100° flat head screws can be used (not provided). Instructions can be found here.

Overall, I am pleased with the way these dummy filler necks turned out, and I am picky. Please note though that there are some minor cosmetic flaws such as small lumps from the brazing done on the original filler necks I purchased. Some of the welds inside the filler neck are not as clean as others, but the welds are completely hidden inside and are fully functional. There are a few very minor thin spots in the paint as well as the occasional slight orange peel, but the portion that shows from the outside of the truck is very nice. It isn't possible to get complete paint coverage on the inside of the filler neck due to the shape of the opening.

Also, please note that I tested the design on my truck, and it fit quite well. There could be variations from one truck to the next that might influence how snugly the dummy filler neck fits in the grommet. Included are four jacking screws that will allow the fit to be tightened up, if necessary.

[KQQL IT]

What's your paypal address?
Might get me motivated on removing the cab tank.

[pjmoreland]

Originally Posted by KQQL IT

What's your paypal address?
Might get me motivated on removing the cab tank.

A box of new parts is a good motivator! PM sent.

[Truckin Fool]

Hi Patrick.They look fantastic. I’m in for one. I’ll send you payment through PayPal later today. Dan

[justKIDn]

Yep, I'm in.

[Hidesertchevy]

I’m in, send me your payment info
Posted via Mobile Device

[SShadow1971]

I'll get a USPS Money order out to you when i get your address. Thank you .

[xabichin67]

Sign Me Up!!!!!

PM me your Paypal info.

Thanks

[BigBird05]

They look fantastic.

[pjmoreland]

Originally Posted by BigBird05

They look fantastic.

Thank you

[Thundarr]

I'm in. Perfect timing.
I recently pulled the in cab tank and just got my Boyd remote tank mounted.

Please send PM. PayPal, Venmo or Zelle?

[Thundarr]

Originally Posted by pjmoreland

Excellent. PM sent

Payment Sent!
I may have missed it above, but can you tell me which 110v outlet will fit the knock out opening?

[pjmoreland]

Originally Posted by Thundarr

Payment Sent!
I may have missed it above, but can you tell me which 110v outlet will fit the knock out opening?

Journeyman Pro HJP-5279

[68Blu]

I'm in send me your PayPal please and I'll have it right over.

[deron1]

Not sure where I sit in line. Please send me Venmo or PayPal payment info if I'm on the current list.

Thank you!!
Deron

[deron1]

Disregard my last, I actually can read. I see I'm number 5. Let me know where to send PayPal payment and I'll do it ASAP.

Thanks again!

[Truckin Fool]

Hey Patrick,Payment has been sent.Thanks for making these. They are really trick. ( I haven’t used that word in awhile, but it really fits.) Dan

[pjmoreland]

Originally Posted by Truckin Fool

Hey Patrick,Payment has been sent.Thanks for making these. They are really trick. ( I haven’t used that word in awhile, but it really fits.) Dan

Haha, thanks, and payment received.

[HWY-STAR]

Hello there Mr Pj.
Your dummy filler necks look really nice, good idea. I was just thinking, how many sawed off filler necks would it take to make an even up trade for one of your custom made one's??
You may already have more than you need??
Like I said , just a thought.

[AllGoNoShow]

I still want it. Please send me paypal address and I will get you money ASAP.

[jollymon02]

I'm in at #20. Also, I'll take the handmade if no others are interested.

[67C10Step]

Super! Let me send you a PM on info.

[MDFarms]

Patrick looks like another 15 wouldn't hurt. I had to push you for the first run I will motivate you for the second run. The list for a second go around looks good now and it will grow before they are finished. If your only making 11 can you serialize them in case they become collector piece in the future? I think I was lucky number #01 and would like it sent in a nicely hand crafted silk lined box. Lol

Thanks for taking on the project.
Chad

[54Caddy]

I would like one

[pjmoreland]

Originally Posted by 54Caddy

I would like one

Ok, cool. I'll add you to the list. Thanks.