Dana 70 4X4 Axle Set.............. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toomanytoyz · 03-03-2007, 05:24 PM

Anybody need These Honker's.................

http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting

1969k10stepside · 03-03-2007, 05:33 PM

So,after hearing the negatives on the dana 60 rear,and the positives on the dana 60 front,how does the dana 70s compare,anyone?

b454rat · 03-03-2007, 05:56 PM

That front is junk. It's closed knuckle drum brake. A 60 front is stronger than that. Even if it was the open knuckle, disc brake, it isn't really THAT much stronger than a 60. It will have a bigger ring gear and the 35 spline outers. There is one of the axles in a yard here, and that is the reason it still sits there, or I would have got it by now.....The rear tho is fine, looks like it has a Powrlok...

Southedisto · 03-03-2007, 09:23 PM

Quote:

Originally Posted by b454rat

That front is junk. It's closed knuckle drum brake. A 60 front is stronger than that. Even if it was the open knuckle, disc brake, it isn't really THAT much stronger than a 60. It will have a bigger ring gear and the 35 spline outers. There is one of the axles in a yard here, and that is the reason it still sits there, or I would have got it by now.....The rear tho is fine, looks like it has a Powrlok...

X2, 70 sounds nice, but they are crappola.

1969k10stepside · 03-03-2007, 09:26 PM

So bigger isnt always better....lol

**special-K** · 03-03-2007, 09:58 PM

The Dana60/70 combo came in the M41s.They`re tougher than what`s under most every 4wd.Just not the best.The Dana70 is one tough rear end that`s hard to beat.

stan79chevy · 03-04-2007, 05:40 PM

b454rat is correct. dana 70 front is going to be heavier...drum brakes just suck...locker options are limited..gear options are limited...prices for replacement parts are going to be rediculous. you could get 60 hubs and stuff and swap it to a disk brake set up but then youve just got an expensive cobbled dana 60. dana 70 rears can be broken...i busted the pinion yoke clean off and shot pieces of the locker through the cover.

stan

1969 GMC · 03-04-2007, 07:10 PM

Quote:

Originally Posted by stan79chevy

b454rat is correct. dana 70 front is going to be heavier...drum brakes just suck...locker options are limited..gear options are limited...prices for replacement parts are going to be rediculous. you could get 60 hubs and stuff and swap it to a disk brake set up but then youve just got an expensive cobbled dana 60. dana 70 rears can be broken...i busted the pinion yoke clean off and shot pieces of the locker through the cover.

stan

While I agree with part of what you are saying, there are plenty of locker and gearing selections for Dana 70's. Anywhere from 3.07's up to 7.17. If you need more (or less) gearing than that, you need another type of axle (and perhaps some mental help

) Detroit locker, lock-right, power lock posi, arb air locker, and im sure there are more.

If you think some brake parts are tough to find for Chevy's, those front brakes will be just as much of a nightmare, not to mention if you have to replace kingpins or any other parts.

*1tonswb* · 03-04-2007, 10:49 PM

If you had a 60 front with a bent housing or if your eating front ring and pinions then it would be nice to have the 70 front to weld your 60 inner c's on. After all, the front 70 does look like its got a detroit in it.

1969 GMC · 03-04-2007, 10:56 PM

Quote:

Originally Posted by 1tonswb

If you had a 60 front with a bent housing or if your eating front ring and pinions then it would be nice to have the 70 front to weld your 60 inner c's on. After all, the front 70 does look like its got a detroit in it.

Good eyes, I didn't bother to check cuz the pic was so dark. With it lightened up, sure does look like one to me.

toomanytoyz · 03-05-2007, 01:48 PM

Same Seller Just got over $1000.00 for a Set Of 60's, Make's me feel Real Good on Getting The Deal i Got on My 60's For The Wrecker Project.........

Blue_71 · 03-06-2007, 12:36 AM

isnt the 14 bolt pretty much the same as a dana 70 rear, except the 14 bolt has a larger pinion shaft/bearing?

**special-K** · 03-06-2007, 11:05 AM

Welllll....I wouldn`t say that.You know they aren`t even made by the same companies and the design surely varies.

toomanytoyz · 03-06-2007, 11:09 AM

Just checked the Auction & seen Someone Dropped out of Bidding, Maybe someone Read This Thread, It's Down to $ 405.00 Now...........

Blue_71 · 03-06-2007, 08:23 PM

special- yup, ones a GM and ones Dana, i guess i should have worded that better

i read somewhere one time that strength for strength, and most of the specs (axle tube dimensions, axle shaft diminsions, stock brake sizes, that kinda thing) are pretty well equal between the 2, but the 14 bolt 10.5 FF had a bigger pinion. i think it may have been peterson's 4 wheel and off road maybe?

DieselEater · 03-06-2007, 08:43 PM

Well.....Here in the pullin' world, I've heard many Ford guys admit that the 14-bolt was tougher than the D70. I've also heard, like in previous posts you've probably seen that the H 072 is just as tough or tougher than the 14-bolt. We have guys in our Pullin' association pushing 800+ HP through 14-bolts every weekend at 7500+RPM and they live all day long!!!!!!! The D60 is not even considered for pullin' at this level....

GET A 14-BOLT...THEY'RE DIRT CHEAP, AND STRONG!!!!

D60 front....the aftermarket has made them VERY STOUT...

1969 GMC · 03-07-2007, 03:31 AM

Quote:

Originally Posted by Blue_71

special- yup, ones a GM and ones Dana, i guess i should have worded that better

i read somewhere one time that strength for strength, and most of the specs (axle tube dimensions, axle shaft diminsions, stock brake sizes, that kinda thing) are pretty well equal between the 2, but the 14 bolt 10.5 FF had a bigger pinion. i think it may have been peterson's 4 wheel and off road maybe?

The real difference is the 14 bolt's 3rd pinion bearing. The D70 only has 2, further apart. The Eaton also has 3. It makes it harder for the pinion gear to "walk" away from the ring gear under load.

Oh, and read Petersen's 4WOR with a grain of salt. They print up a LOT of mistakes.

**special-K** · 03-07-2007, 07:19 AM

Yeah,I read recently that the 400SBC came in 2wd trucks since 1970,for instance.

Blue_71 · 03-07-2007, 08:05 PM

so does the LD 14bolt SF 6 lug have 3 pinion bearings too?

on the "walking away from the ring gear" thing, i bet thats what happened to the D70 4:10 locker i have in the field with no ring gear teeth left

is that even worth rebuilding?

you both have a very good point about the reading with a grain of salt

**special-K** · 03-08-2007, 12:21 AM

I can`t say on the semi-floater(8 or 6 lug).I`ve never been into one myself.I have one in a`91 3/4t Suburban,though.

snj8198 · 03-16-2007, 12:49 AM

Hi Blue, the SF14 is a standard c-clip axle without the removable pinion support on the front.

03-03-2007, 05:24 PM	#1
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Dana 70 4X4 Axle Set.............. Anybody need These Honker's................. http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting

03-03-2007, 05:33 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: Dana 70 4X4 Axle Set.............. So,after hearing the negatives on the dana 60 rear,and the positives on the dana 60 front,how does the dana 70s compare,anyone?

03-03-2007, 05:56 PM	#3
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,464	Re: Dana 70 4X4 Axle Set.............. That front is junk. It's closed knuckle drum brake. A 60 front is stronger than that. Even if it was the open knuckle, disc brake, it isn't really THAT much stronger than a 60. It will have a bigger ring gear and the 35 spline outers. There is one of the axles in a yard here, and that is the reason it still sits there, or I would have got it by now.....The rear tho is fine, looks like it has a Powrlok... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

03-03-2007, 09:26 PM	#5
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: Dana 70 4X4 Axle Set.............. So bigger isnt always better....lol

03-03-2007, 09:58 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Dana 70 4X4 Axle Set.............. The Dana60/70 combo came in the M41s.They`re tougher than what`s under most every 4wd.Just not the best.The Dana70 is one tough rear end that`s hard to beat. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2007, 05:40 PM	#7
stan79chevy Registered User Join Date: Sep 2003 Location: COVINGTON GEORGIA Posts: 477	Re: Dana 70 4X4 Axle Set.............. b454rat is correct. dana 70 front is going to be heavier...drum brakes just suck...locker options are limited..gear options are limited...prices for replacement parts are going to be rediculous. you could get 60 hubs and stuff and swap it to a disk brake set up but then youve just got an expensive cobbled dana 60. dana 70 rears can be broken...i busted the pinion yoke clean off and shot pieces of the locker through the cover. stan __________________ 79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS

03-04-2007, 10:49 PM	#9
1tonswb Account Suspended Join Date: Nov 2003 Location: Oregon Posts: 300	Re: Dana 70 4X4 Axle Set.............. If you had a 60 front with a bent housing or if your eating front ring and pinions then it would be nice to have the 70 front to weld your 60 inner c's on. After all, the front 70 does look like its got a detroit in it.

03-05-2007, 01:48 PM	#11
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Dana 70 4X4 Axle Set.............. Same Seller Just got over $1000.00 for a Set Of 60's, Make's me feel Real Good on Getting The Deal i Got on My 60's For The Wrecker Project.........

03-06-2007, 11:05 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Dana 70 4X4 Axle Set.............. Welllll....I wouldn`t say that.You know they aren`t even made by the same companies and the design surely varies. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-06-2007, 11:09 AM	#14
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Dana 70 4X4 Axle Set.............. Just checked the Auction & seen Someone Dropped out of Bidding, Maybe someone Read This Thread, It's Down to $ 405.00 Now...........

03-06-2007, 08:23 PM	#15
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	Re: Dana 70 4X4 Axle Set.............. special- yup, ones a GM and ones Dana, i guess i should have worded that better i read somewhere one time that strength for strength, and most of the specs (axle tube dimensions, axle shaft diminsions, stock brake sizes, that kinda thing) are pretty well equal between the 2, but the 14 bolt 10.5 FF had a bigger pinion. i think it may have been peterson's 4 wheel and off road maybe?

03-06-2007, 08:43 PM	#16
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Dana 70 4X4 Axle Set.............. Well.....Here in the pullin' world, I've heard many Ford guys admit that the 14-bolt was tougher than the D70. I've also heard, like in previous posts you've probably seen that the H 072 is just as tough or tougher than the 14-bolt. We have guys in our Pullin' association pushing 800+ HP through 14-bolts every weekend at 7500+RPM and they live all day long!!!!!!! The D60 is not even considered for pullin' at this level.... GET A 14-BOLT...THEY'RE DIRT CHEAP, AND STRONG!!!! D60 front....the aftermarket has made them VERY STOUT...

03-07-2007, 07:19 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Dana 70 4X4 Axle Set.............. Yeah,I read recently that the 400SBC came in 2wd trucks since 1970,for instance. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-07-2007, 08:05 PM	#19
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	Re: Dana 70 4X4 Axle Set.............. so does the LD 14bolt SF 6 lug have 3 pinion bearings too? on the "walking away from the ring gear" thing, i bet thats what happened to the D70 4:10 locker i have in the field with no ring gear teeth left is that even worth rebuilding? you both have a very good point about the reading with a grain of salt

03-08-2007, 12:21 AM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Dana 70 4X4 Axle Set.............. I can`t say on the semi-floater(8 or 6 lug).I`ve never been into one myself.I have one in a`91 3/4t Suburban,though. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

03-16-2007, 12:49 AM	#21
snj8198 Registered User Join Date: Feb 2007 Location: Star Valley, WY Posts: 2,038	Re: Dana 70 4X4 Axle Set.............. Hi Blue, the SF14 is a standard c-clip axle without the removable pinion support on the front.

Register or Log In To remove these advertisements.