CA WTB 68 hood molding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rich rodriguez** · 03-09-2021, 08:36 PM

Anyone have one in good condition they want to sell?

**Ironhorse** · 03-09-2021, 10:18 PM

Have parted out several, owned several over the years and have seen a LOT of 67-72 Chevy/GMC trucks. Have NEVER seen an original hood with a factory hood molding. Do have a pic of the one you seek? I know a few trucks over the years have had a 1st Generation Monte Carlo "Chevrolet" hood strip added to the hood but it is not factory.

**Getter-Done** · 03-09-2021, 10:32 PM

I have heard of 68 having hood trim.
There are 3 members that I know that could answer this question.

Maybe they will Chime In.

Here is an old link I found to keep this going

Link: https://67-72chevytrucks.com/vboard/...7+68+hood+trim

.

**Rich rodriguez** · 03-09-2021, 10:27 PM

There very common

**Ironhorse** · 03-09-2021, 10:33 PM

Okay, on the same page now. I took your "hood molding" to be a reference to a molding strip down the center length from front to back near the windshield.

**Rich rodriguez** · 03-26-2021, 03:59 PM

Still looking

**Rich rodriguez** · 04-13-2021, 12:28 AM

Anyone? Someone has to be holding on to a NOS molding

03-09-2021, 08:36 PM	#1
Rich rodriguez Registered User Join Date: Jan 2018 Location: Stockton Ca Posts: 424	WTB 68 hood molding Anyone have one in good condition they want to sell?

03-09-2021, 10:18 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: WTB 68 hood molding Have parted out several, owned several over the years and have seen a LOT of 67-72 Chevy/GMC trucks. Have NEVER seen an original hood with a factory hood molding. Do have a pic of the one you seek? I know a few trucks over the years have had a 1st Generation Monte Carlo "Chevrolet" hood strip added to the hood but it is not factory. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-09-2021, 10:32 PM	#3
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,319	Re: WTB 68 hood molding I have heard of 68 having hood trim. There are 3 members that I know that could answer this question. Maybe they will Chime In. Here is an old link I found to keep this going Link: https://67-72chevytrucks.com/vboard/...7+68+hood+trim . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-09-2021, 10:27 PM	#4
Rich rodriguez Registered User Join Date: Jan 2018 Location: Stockton Ca Posts: 424	Re: WTB 68 hood molding There very common Attached Images

03-09-2021, 10:33 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,285	Re: WTB 68 hood molding Okay, on the same page now. I took your "hood molding" to be a reference to a molding strip down the center length from front to back near the windshield. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-26-2021, 03:59 PM	#6
Rich rodriguez Registered User Join Date: Jan 2018 Location: Stockton Ca Posts: 424	Re: WTB 68 hood molding Still looking

04-13-2021, 12:28 AM	#7
Rich rodriguez Registered User Join Date: Jan 2018 Location: Stockton Ca Posts: 424	Re: WTB 68 hood molding Anyone? Someone has to be holding on to a NOS molding



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.