|
|
|
01-21-2004, 10:16 AM
|
#1 |
|
Junior Member
Join Date: Feb 2003
Location: L.I.,NY
Posts: 49
|
rear end swap
I want to change my 67 coil rear end to a 5lug. My question is what other rears will fits? Can I put a newer rear in and change the axle saddles? If I go to the junk yard what width axle am I looking for or what year am I looking for ? Forgot to mention it is a 2wd and I would like a 3:73 rear.
Thanks for the help, Pete |
|
|
|
01-21-2004, 10:31 AM
|
#2 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
A rear end from a 71 or 72 with coil spring should bolt right in and give you your 5 lugs. 73 and up are all set up for leaf springs.
Somewhere there is discussion on using 71 and up axles in your rear, but they are 3/4" wider than your present axles and you would have to make a spacer to use them.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
01-21-2004, 10:33 AM
|
#3 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
|
I would try to find a 71 or 72 truck with the coil springs. It would be a direct bolt in and I think allot of the 6cyl and some of the v8 trucks had 3.73's.
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
