|
06-17-2003, 06:30 PM | #1 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Stuff for sale
First up is a headlamp switch out of a 70 chevy...pretty sure they are all the same. CST/Cheyenne style bright trim on knob. The rehostat (dash light brightness controller) is very picky...dash lights will work on highest setting.
$10 to your door. I can't stand to just throw this away...original, kinda brittle, yellowed... 2 bucks shipped Power steering pump from '70 3/4 ton Chevy w/350 and A/C. Stock style, not a later pump. Worked fine a couple years ago when removed, didn't leak either. however, since it has sat for about 2 1/2 years or so, it may well leak. Has a small dent in body. $15 plus shipping Factory "fuel tank delete plate" from a bigger truck...'70 C/40 bobtail truck. Put your fuel tank under the bad and do the body work later. Sand blasted and painted high gloss black. Very mild pitting in the metal. SOLD!! and the front... 622 gold vinyl trim defroster vents. The picture shos a bit more color than is really there, but there are no cracks or chips... coupld be painted to match (or contrast) your dash or vinyl color with normal spray paint. One left, one right. SOLD!! More to come.... see first reply. Last edited by Longhorn Man; 06-18-2003 at 03:33 PM. |
06-17-2003, 06:31 PM | #2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Rear view mirror from a '92 S-10 blazer with map lights. Glues on windshield like a '72, just drill a small hole in top of cab and run power and ground wire to the back wall of cab and then wire to the fuse box. Pretty cool conversion. Mounting 'nub' included. Black plastic body with perfect mirror glass.
SOLD!! Shift indicator from '70 non-tilt truck. Bright body with some small pitting, shined up pretty good though. The P RNDL2L1 window is clear/no fogging and the lettering is 99% there. The very top of a couple letters are missing. POINTER IS NOT INCLUDED, NOR FIBER OPTIC CABLE. SOLD!! Van side marker lights. All 4, direct bolt on, smooth apearance, and more light emmited. One rear lens is not quite as shiney as the rest, other than that, they are in perfect shape. SOLD!! It's worth a shot on here... It works, no antena. Uniden PRO 510 C.B. SOLD!! Speedo & fuel guage. nice needle color (I might have re-painted the needles, they've been in my basement for a while now) No rust, nice and shiney. Out of a C/40 bobtail truck('70). The lenses on the fuel guage are not the same as our trucks. One says tandom locke, and low air I think on the other lens. Would work fine, just instead of BRAKE when you run low on fluid, it'll say something else. I'm sure the lens could be chainged...but I wouldn't know how. I think it's rivited together? 24139 miles showing if it matters. SOLD!! [img] CST/Cheyenne style rear marker lights. Black paint on outer edges kinda faded/worn, other than that, good condition. SOLD!! PLEASE READ!! 1. payable by cash (if you wanna mail cash), money order, postal money order, or check only...I have no pay pall or anyother online pay thing. 2. Please respond on this thread so I can tell who wants what first. PMs will be ignored on these items (as will e-mails) onless you reserve your spot on this thread, and then PM me. 3. I can hold onto something for you (by request) for a reasonable amount of time. Last edited by Longhorn Man; 06-22-2003 at 12:02 PM. |
06-17-2003, 06:51 PM | #3 |
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
I'll take the gas tank delete plate and CB. Thanks, Pm me with details.
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
06-17-2003, 06:56 PM | #4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Sweet...I figured the C.B. would end up gettin thrown away.
PM sent. |
06-17-2003, 07:43 PM | #5 |
Registered User
Join Date: Jan 2001
Location: Poulsbo, W.A.
Posts: 44
|
Andy i'll take the Shift indicator email me or pm me with payment info kevin
__________________
kevins67gmc Poulsbo,WA |
06-17-2003, 08:24 PM | #6 |
Senior Member
Join Date: Feb 2003
Location: WIS
Posts: 1,752
|
parts
I'll take the lighted mirror & cheyenne marker lights. Where do I send the $25 to ?.......Zoomy
|
06-17-2003, 08:51 PM | #7 |
Glowing since 1978
Join Date: Mar 2001
Location: Lusby,MD,USA
Posts: 532
|
I'll take the defroster vents. I pretty sure they will work on my 69 C20 A/C truck. If you know differently let me know. Thanks again for the fiber optic information. I fixed it between rain drops. Send me the information on where to send the money. E-mail is ddsmith60@comcast.net.
__________________
66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper |
06-18-2003, 03:31 PM | #8 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Keven and zoom...PMs sent.
ddsmith, you have main...and the vents are good for AC or non A/C trucks. Anyone else? |
06-18-2003, 03:41 PM | #9 | |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
i know i passed last time you had a set, but you couldnt find me a set of original alt brackets could you? my rigged job isnt acting to safe will the originals work with headers?
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
06-18-2003, 04:31 PM | #10 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Originals will work with headers, (original 69 and up anyways) however, I have NEVER seen any in junk yards since coming up to Ohio. The ones I sold last time were actially off the blue longhorn. I was holding onto them for the famed "one day...when i do one up right..."
Who was I foolin? Trust me..if i see one, i will grab it. |
06-18-2003, 05:42 PM | #11 | |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
it's starting to look to me like i'll be getting a chrome long water pump and 73+ brackets
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
06-18-2003, 05:55 PM | #12 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Why chrome???!!?
|
06-18-2003, 06:17 PM | #13 | |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
cause chrome's cool! hehe, if you look in my avatar ive already got the chrome t-chain cover and valve covers, might as well go the rest of the way (minus oil pan, im not pullin that fricken engine again!!)
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
06-18-2003, 08:51 PM | #14 |
Registered User
Join Date: Mar 2003
Location: Meansville, Georgia
Posts: 218
|
van marker lights
would you take $15 shipped for the van marker lights? if so, i'm interested. let me know either way. thanks.
__________________
68 SWB Stepside 72 Cheyenne 20 72 SWB Fleetside 72 Suburban 72 2wd Blazer |
06-19-2003, 03:38 PM | #15 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
tripp...sure thing man...I'm flexable. PM coming...
|
06-19-2003, 05:14 PM | #16 |
I had a V-8
Join Date: May 2003
Location: Phoenix AZ
Posts: 1,116
|
I would like the gas gauge/speedometer. The $20. includes shipping?? If I read correctly, the speedo and gas gauge worked, to your knowledge?? Let me know.
Thanks, Nick
__________________
1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE. |
06-19-2003, 08:31 PM | #17 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Nick, I know for a fact the speedo does work. The fuel guage...I was told it did, can not gurrante it.
20 bucks is in fact with the shipping. Let me know if you are still interested...you have dibs. |
06-20-2003, 02:21 AM | #18 |
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
Hey, I must have screwed up or something because I lost all my Pm's. Could you PM me your address again, please. I also need the amount for the filler plug and CB. Thanks
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
06-20-2003, 11:38 PM | #19 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
LeRoy...PM sent.
Anyone interested in the remaining items? |
06-21-2003, 01:45 AM | #20 | |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
how "kinda brittle" we talking here on the dome lamp lens? i just reliezed tonight that mines cracked pretty good... looks like they couldnt figure out how to get it off and just punched a hole in it
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
06-22-2003, 10:57 AM | #22 |
Senior Member
Join Date: May 2002
Location: hamilton,ohio,usa
Posts: 1,499
|
Hey neighbor!!!
do you have any brackets for the power steering pump? if so, i'll take it in Hamilton, Oh. Let me know Big Blue |
06-22-2003, 12:01 PM | #23 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
moesburb got the speedo & fuel guage.
big blue...no I don't have any of the brackets. I sold them a year ago or so. (I knew I shouldn't have seperated the pump from the brackets) |
Bookmarks |
|
|