WTB: NEED axle backing plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shelby987 · 02-28-2006, 10:07 PM

Need the axle backing plate and brake hardware (springs, adjuster, clips, etc) for a 70 3/4t front axle....d44hd....I am aware its a one year axle....but if someone can help it would be appreciated.
PM me, or reply here.....thanks!

da-burb · 03-01-2006, 12:26 AM

I should have what you need. I have a 70 3/4 ton front axle. Any idea on how involved the removal is? The ax is out of the truck and stored in pallet racking in the shed. At least that part is easy.

Chris H · 03-01-2006, 02:59 PM

Quote:

Originally Posted by da-burb

I should have what you need. I have a 70 3/4 ton front axle. Any idea on how involved the removal is? The ax is out of the truck and stored in pallet racking in the shed. At least that part is easy.

C'mon now, you know you are just going to have Mrs. Da-Burb do all the hard work anyways!!

I wish I had some pallet racking...

shelby987 · 03-01-2006, 08:52 AM

Honestly, I would guess 5~10 mins with the right tools.....just tore mine down to the spindle the other day, you need to pull the cap off of the locking hub (6 allen head bolts), pull the snap ring off of the stub of the axle to get the locking hub off, unbolt the locking hub (6 9/16 bolts) and remove assembly. After that there will be (2) axle nuts seperated by a lock washer (I rented the tool from a murray's autoparts store, it came in a kit of 5 or 6). Once the hub if off there are (6) bolts holding on the backing plate, and I would assume the brake line needs to be pulled......any idea on asking price? shipping to 48198?
Thanks

mrein3 · 03-01-2006, 02:27 PM

36 year old Minnesota front end? I'm guessing the fire wrench is coming out for some fastener to get the backing plate off.

A couple of years ago I put the front disk brakes off a 1971 Minnesota Monte Carlo on my Chevelle. I wanted to paint or replace the backing plates. I had the spindles still on the car, the largest breaker bar I own, and I still couldn't budge the backing plate hardware.

I ended up wire wheeling them, por-15ing them, and leaving them attached.

da-burb · 03-02-2006, 12:34 AM

ChrisH.....Mrs Da-burb has really been slacking in the wrench spinning department. Now in her second semester of higher learning leaves little time for her in the shop. ps pallet racking....it isn't going to be long now.........

Matt(mrein) this isn't even a MN front end. I had to import this from Indiana. It doesn't look too bad at all.

Shelby, I will take a look at it this weekend and PM you shortly.

02-28-2006, 10:07 PM	#1
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	WTB: NEED axle backing plate Need the axle backing plate and brake hardware (springs, adjuster, clips, etc) for a 70 3/4t front axle....d44hd....I am aware its a one year axle....but if someone can help it would be appreciated. PM me, or reply here.....thanks! __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

03-01-2006, 12:26 AM	#2
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: WTB: NEED axle backing plate I should have what you need. I have a 70 3/4 ton front axle. Any idea on how involved the removal is? The ax is out of the truck and stored in pallet racking in the shed. At least that part is easy. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

03-01-2006, 08:52 AM	#4
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: WTB: NEED axle backing plate Honestly, I would guess 5~10 mins with the right tools.....just tore mine down to the spindle the other day, you need to pull the cap off of the locking hub (6 allen head bolts), pull the snap ring off of the stub of the axle to get the locking hub off, unbolt the locking hub (6 9/16 bolts) and remove assembly. After that there will be (2) axle nuts seperated by a lock washer (I rented the tool from a murray's autoparts store, it came in a kit of 5 or 6). Once the hub if off there are (6) bolts holding on the backing plate, and I would assume the brake line needs to be pulled......any idea on asking price? shipping to 48198? Thanks __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

03-01-2006, 02:27 PM	#5
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	Re: WTB: NEED axle backing plate 36 year old Minnesota front end? I'm guessing the fire wrench is coming out for some fastener to get the backing plate off. A couple of years ago I put the front disk brakes off a 1971 Minnesota Monte Carlo on my Chevelle. I wanted to paint or replace the backing plates. I had the spindles still on the car, the largest breaker bar I own, and I still couldn't budge the backing plate hardware. I ended up wire wheeling them, por-15ing them, and leaving them attached. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

03-02-2006, 12:34 AM	#6
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: WTB: NEED axle backing plate ChrisH.....Mrs Da-burb has really been slacking in the wrench spinning department. Now in her second semester of higher learning leaves little time for her in the shop. ps pallet racking....it isn't going to be long now......... Matt(mrein) this isn't even a MN front end. I had to import this from Indiana. It doesn't look too bad at all. Shelby, I will take a look at it this weekend and PM you shortly. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.