Another 52 interior door panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldman3** · 02-11-2020, 05:48 PM

Hey everyone. I'm going to show how I made another door panel. This is based on the new way my son (Mark -Reaper71) and I learned from Erin. It is different and a new learning curve, but not bad. I didn't take a lot of pics because of this, new way, but it should show enough to be able to follow. If there are any question let me know...Jim

Pic #1 This is the panel I built back in May of 2019 for my friend Ed. This panel he wanted installed using screws (his call not mine). The panel had been taken off and on so may times by him and others, that it really looked bad and beyond repair. So here we go...

**oldman3** · 02-11-2020, 05:51 PM

This is Ed's door, this is NOT how you cut a door to install power windows (NOT OUR WORK).

**oldman3** · 02-11-2020, 05:56 PM

I'm going to show each pic with remarks one at a time, so it's easier to follow.
This is the 20 gauge sheet metal that was formed to door shape. The white 1/8" plastic has been glued to the panel. (Panel was sanded in area where plastic will go, then super glued applied to metal, the spray activator on plastic and held together.

**oldman3** · 02-11-2020, 05:57 PM

This is the insert piece with the plastic that will be glued to insert.

**oldman3** · 02-11-2020, 06:00 PM

Here I've set the metal insert piece into place. (earlier I had drilled 1/8" holes thru both panels to know where magnets would go.)

**oldman3** · 02-11-2020, 06:03 PM

Here the 1/8" plastic has been glued to the metal (super glue,activator) insert piece, then I will trim to the metal.

**joedoh** · 02-11-2020, 08:32 PM

unbelievable, both what passes for a power window install and for the amazing work on the door panels!

**oldman3** · 02-11-2020, 08:42 PM

Quote:

Originally Posted by joedoh

unbelievable, both what passes for a power window install and for the amazing work on the door panels!

Thanks Russ...Jim

**mongocanfly** · 02-11-2020, 09:13 PM

great work Jim...as usual

**oldman3** · 02-12-2020, 12:19 AM

Quote:

Originally Posted by mongocanfly

great wok Jim...as usual

Thanks Greg...Jim

OutlawDrifter · 02-12-2020, 04:16 PM

Jim that looks fantastic! Very well thought out!

**oldman3** · 02-12-2020, 08:05 PM

Quote:

Originally Posted by OutlawDrifter

Jim that looks fantastic! Very well thought out!

Thanks, appreciate you checking in out...Jim

MP&C · 03-01-2020, 11:46 PM

Nice work Jim!

**oldman3** · 03-02-2020, 11:00 AM

Quote:

Originally Posted by MP&C

Nice work Jim!

Robert, thank you...Jim

02-11-2020, 05:51 PM	#2
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Another 52 interior door panel This is Ed's door, this is NOT how you cut a door to install power windows (NOT OUR WORK). Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2020, 05:56 PM	#3
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Another 52 interior door panel I'm going to show each pic with remarks one at a time, so it's easier to follow. This is the 20 gauge sheet metal that was formed to door shape. The white 1/8" plastic has been glued to the panel. (Panel was sanded in area where plastic will go, then super glued applied to metal, the spray activator on plastic and held together. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2020, 05:57 PM	#4
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Another 52 interior door panel This is the insert piece with the plastic that will be glued to insert. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2020, 06:00 PM	#5
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Another 52 interior door panel Here I've set the metal insert piece into place. (earlier I had drilled 1/8" holes thru both panels to know where magnets would go.) Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2020, 06:03 PM	#6
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Another 52 interior door panel Here the 1/8" plastic has been glued to the metal (super glue,activator) insert piece, then I will trim to the metal. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2020, 05:48 PM	#1
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Another 52 interior door panel Hey everyone. I'm going to show how I made another door panel. This is based on the new way my son (Mark -Reaper71) and I learned from Erin. It is different and a new learning curve, but not bad. I didn't take a lot of pics because of this, new way, but it should show enough to be able to follow. If there are any question let me know...Jim Pic #1 This is the panel I built back in May of 2019 for my friend Ed. This panel he wanted installed using screws (his call not mine). The panel had been taken off and on so may times by him and others, that it really looked bad and beyond repair. So here we go... Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2020, 08:32 PM	#7
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: Another 52 interior door panel unbelievable, both what passes for a power window install and for the amazing work on the door panels! __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

02-11-2020, 09:13 PM	#9
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,663	Re: Another 52 interior door panel great work Jim...as usual __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 03-02-2020 at 03:22 AM.

02-12-2020, 04:16 PM	#11
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,783	Re: Another 52 interior door panel Jim that looks fantastic! Very well thought out! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

03-01-2020, 11:46 PM	#13
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,647	Re: Another 52 interior door panel Nice work Jim! __________________ Robert



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.