235s on 2in lowered C-10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chip46wis · 07-08-2008, 10:11 AM

I am lowering my 69 step about 2in---anyone have experience with running 235s in front? Will they rub or not?

I should add these will be on a stock ralleye truck rim 8in

**raggedjim** · 07-08-2008, 10:20 AM

Probably not, but what is the series? 75's are tall, 35's are short...

Rg

chip46wis · 07-08-2008, 10:42 AM

Sorry---should have mentioned that-----235 75 r 15 thanks

**raggedjim** · 07-08-2008, 11:21 AM

That will put your tire diameter at just under 29" you should be fine, I have a 4" drop in the front with a 28" tire.

Good luck, Rg

bowtieboy93 · 07-08-2008, 03:24 PM

Correct me if im wrong, but factory diameter was 27.1" and had lots of roomin the wheels
if you have a 2 in drop your fine
it'll take alot more that that for them to rub

PanelDeland · 07-08-2008, 05:11 PM

I'm running235-70-15's with a 2 1/2 spindle drop.I'm not rubbing but I haven't put the inner fenders back in it yet.

chip46wis · 07-08-2008, 08:07 PM

Thank you!!!!! I love bigger tires!!

cparman · 07-08-2008, 08:22 PM

I will try and post a pic or two of my 69. I put 2 1/2"
drop spindles on it with a set of 6 lug rallys 15x8.
255/70r15 did not rub. put 225/70r15 on it, but I think I like the other tires on it better. I will go take a oic or two and try and post them in a few

I personally think that when I did the disc brakes it has pushed the wheels out from under the fenders. I am planning to send the wheels to TRUE DESIGN WHEEL CO. have them change the offset by an inch. I think I will like that better. Had them do a couple of set of Buick Grand National wheels, and they truned out sweet!!

cparman · 07-08-2008, 08:39 PM

ok here's the pics. I HOPE. I took these in my play room. It was getting dark, and hopefully it will rain tonight.

chip46wis · 07-14-2008, 07:32 AM

Thank all of you! Cparman-nice pics of a beautiful truck!!!! thanks

68_chop_top · 07-14-2008, 09:25 AM

I run 255R60x17 with 2 1/2" drop spindles with 2" lowering springs and have no problems.

70rs/ss · 07-15-2008, 04:30 PM

BTW the disc brake swap does move the wheel out about an inch or so. I ran 275/60/15 on all four with a 2-4 drop and had no issues with a 15X8 rim. I was looking for a decent 17" tire size for my 2wd Blazer. I put 3/4 ton suspension under it and bought hummer 2 8-lug 17x8.5" wheels for it and was wondering how much tire I could fit under it. Was looking at a 275/60/17 but it was like 30-31"s tall! How tall are the 255/60/17s??

68_chop_top · 07-15-2008, 04:34 PM

255/60/17 are 29" tall

70rs/ss · 07-15-2008, 04:45 PM

Quote:

Originally Posted by 68_chop_top

255/60/17 are 29" tall

Thanks!

Bob 68327 · 07-15-2008, 05:54 PM

I'm runnin them on the front of mine with lots of drop and I have yet to rub them so you should be fine !!!

kcjones · 07-16-2008, 05:43 PM

Bob 68327, whatcha got in the rear?

Bob 68327 · 07-16-2008, 09:18 PM

Quote:

Originally Posted by kcjones

Bob 68327, whatcha got in the rear?

275/60/15 on 15x11 Ralleys

chevymad · 07-17-2008, 02:01 AM

I run 275/60r15s on 15x10 wheels on all 4 corners. This is with a 3" drop spring and disc brake conversion. No rubbing at all ever.

07-08-2008, 10:11 AM	#1
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	235s on 2in lowered C-10? I am lowering my 69 step about 2in---anyone have experience with running 235s in front? Will they rub or not? I should add these will be on a stock ralleye truck rim 8in Last edited by chip46wis; 07-08-2008 at 10:21 AM.

07-08-2008, 10:20 AM	#2
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,592	Re: 235s on 2in lowered C-10? Probably not, but what is the series? 75's are tall, 35's are short... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

07-08-2008, 10:42 AM	#3
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Re: 235s on 2in lowered C-10? Sorry---should have mentioned that-----235 75 r 15 thanks

07-08-2008, 11:21 AM	#4
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,592	Re: 235s on 2in lowered C-10? That will put your tire diameter at just under 29" you should be fine, I have a 4" drop in the front with a 28" tire. Good luck, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

07-08-2008, 03:24 PM	#5
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Re: 235s on 2in lowered C-10? Correct me if im wrong, but factory diameter was 27.1" and had lots of roomin the wheels if you have a 2 in drop your fine it'll take alot more that that for them to rub __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4

07-08-2008, 05:11 PM	#6
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 235s on 2in lowered C-10? I'm running235-70-15's with a 2 1/2 spindle drop.I'm not rubbing but I haven't put the inner fenders back in it yet. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

07-08-2008, 08:07 PM	#7
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Re: 235s on 2in lowered C-10? Thank you!!!!! I love bigger tires!!

07-08-2008, 08:22 PM	#8
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: 235s on 2in lowered C-10? I will try and post a pic or two of my 69. I put 2 1/2" drop spindles on it with a set of 6 lug rallys 15x8. 255/70r15 did not rub. put 225/70r15 on it, but I think I like the other tires on it better. I will go take a oic or two and try and post them in a few I personally think that when I did the disc brakes it has pushed the wheels out from under the fenders. I am planning to send the wheels to TRUE DESIGN WHEEL CO. have them change the offset by an inch. I think I will like that better. Had them do a couple of set of Buick Grand National wheels, and they truned out sweet!! Last edited by cparman; 07-08-2008 at 08:41 PM.

07-08-2008, 08:39 PM	#9
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: 235s on 2in lowered C-10? ok here's the pics. I HOPE. I took these in my play room. It was getting dark, and hopefully it will rain tonight. Attached Images

07-14-2008, 07:32 AM	#10
chip46wis Registered User Join Date: Dec 2004 Location: Central Wisconsin Posts: 1,317	Re: 235s on 2in lowered C-10? Thank all of you! Cparman-nice pics of a beautiful truck!!!! thanks

07-14-2008, 09:25 AM	#11
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: 235s on 2in lowered C-10? I run 255R60x17 with 2 1/2" drop spindles with 2" lowering springs and have no problems. __________________ Mine is chopped, has a clutch, and a big block.

07-15-2008, 04:30 PM	#12
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 235s on 2in lowered C-10? BTW the disc brake swap does move the wheel out about an inch or so. I ran 275/60/15 on all four with a 2-4 drop and had no issues with a 15X8 rim. I was looking for a decent 17" tire size for my 2wd Blazer. I put 3/4 ton suspension under it and bought hummer 2 8-lug 17x8.5" wheels for it and was wondering how much tire I could fit under it. Was looking at a 275/60/17 but it was like 30-31"s tall! How tall are the 255/60/17s??

07-15-2008, 04:34 PM	#13
68_chop_top Registered User Join Date: May 2008 Location: Granbury, TEXAS Posts: 250	Re: 235s on 2in lowered C-10? 255/60/17 are 29" tall __________________ Mine is chopped, has a clutch, and a big block.

07-15-2008, 05:54 PM	#15
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: 235s on 2in lowered C-10? I'm runnin them on the front of mine with lots of drop and I have yet to rub them so you should be fine !!! Attached Images __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

07-16-2008, 05:43 PM	#16
kcjones I wish I was a cowboy Join Date: Apr 2008 Location: Rohnert Park, CA Posts: 409	Re: 235s on 2in lowered C-10? Bob 68327, whatcha got in the rear? __________________ -Kris Met list: Cyclone,Wilson,TranzAm,extd56,hotrodhomi,mnky30,Rokcrln,Brad,JerryJones(well, his truck anyway).



Register or Log In To remove these advertisements.

07-17-2008, 02:01 AM	#18
chevymad Registered User Join Date: Jan 2001 Location: skamokawa, WA, USA Posts: 527	Re: 235s on 2in lowered C-10? I run 275/60r15s on 15x10 wheels on all 4 corners. This is with a 3" drop spring and disc brake conversion. No rubbing at all ever. __________________ 70 C10 long fleet, 355/200 4r, 6 lug disc conversion, 3" drop 70 gmc changed to 67/8 chevy, 454 with voodoo cam, th400, all 74 running gear.. in progress

Register or Log In To remove these advertisements.