chevy 350 block question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckincurt · 10-23-2009, 03:58 PM

i just bought a 350 off one of my dads friends but anyways iv been trying to run the #'s on it and on every webite if looked i cant find the casting of this block the casting # is V0502UPB .... the onley thing that i can find is UP with out the B at the end so idk thanks alot everyone

truckincurt · 10-23-2009, 04:59 PM

anyone?

68 TT · 10-23-2009, 06:32 PM

Quote:

Originally Posted by truckincurt

anyone?

That is the assembly line engine ID stamping not the block casting number. It tells you what plant the engine was made in what date it was built and what application it belongs to.

UPB is the application the engine was used in. I don't have any of my books at work or I would look it up for you. I'm sure there is an online source that will list the engine ID codes you need.

The casting number of the block is on the top of the bellhousing flange at the back of the block on the driver side just below the cylinder head.

truckincurt · 10-23-2009, 07:00 PM

14088548 is the number on the back of the engine i can find that online but its vag says like 84-94 i know its out of a 80 somthin plow truck thanks alot for your help

68 TT · 10-23-2009, 07:29 PM

Pretty much a 350 block is a 350 block.

Your only upgrades to the short block are if it has 4-bolt main caps or a steel crank. Many castings could be 2-bolt or 4-bolt blocks so the casting number alone will not tell you what it is. You have to pull the pan.

Heads are another story. You can get everything from 1.72 valve smog heads to 2.02 valve high performance heads and everything in between. Here the casting numbers will tell you everything.

Being a plow truck it probably has regular truck 1.94 valve heads on it that are good for about 330 to 340 hp.

truckincurt · 10-23-2009, 07:40 PM

ya just wanted to know the exact year cuz at 85 they made a slight casting change well thats what my engine teacher says and i know its a 4 bolt... just with my soon to be 383 build and the blocks needs to hold 450-500 horse and about 7000 rpms and id have to kill myself if it goes kaboom lol

truckincurt · 10-23-2009, 07:57 PM

thanks alot

pcwillsie · 10-23-2009, 10:29 PM

some 350 blocks were made with a little better metal high tin high nickle which makes a little stronger steel. to find out if your block is this better metal it will be casted under the timing chain cover.

bitchin85 · 10-23-2009, 11:33 PM

if its the better metal, whats it going to say?

pcwillsie · 10-24-2009, 12:35 AM

if I remember correctly it will have a +10 or t10 cast in it. I will look back in my notes and books to see if I can find it for sure.

cableguy0 · 10-24-2009, 12:45 AM

the block will say 010 020 under the timing cover. i seriously doubt an 80's block is going to have high nickel. trying to turn 7k rpm the least of your worries is the block. you need a good crank rods and pistons. and an excellent balance job. with a 383 you shouldnt have to turn more than 6500rpm to get that hp. so long as the heads are up to the task

10-23-2009, 03:58 PM	#1
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	chevy 350 block question i just bought a 350 off one of my dads friends but anyways iv been trying to run the #'s on it and on every webite if looked i cant find the casting of this block the casting # is V0502UPB .... the onley thing that i can find is UP with out the B at the end so idk thanks alot everyone __________________ diy or die

10-23-2009, 04:59 PM	#2
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	Re: chevy 350 block question anyone? __________________ diy or die

10-23-2009, 07:00 PM	#4
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	Re: chevy 350 block question 14088548 is the number on the back of the engine i can find that online but its vag says like 84-94 i know its out of a 80 somthin plow truck thanks alot for your help __________________ diy or die

10-23-2009, 07:29 PM	#5
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: chevy 350 block question Pretty much a 350 block is a 350 block. Your only upgrades to the short block are if it has 4-bolt main caps or a steel crank. Many castings could be 2-bolt or 4-bolt blocks so the casting number alone will not tell you what it is. You have to pull the pan. Heads are another story. You can get everything from 1.72 valve smog heads to 2.02 valve high performance heads and everything in between. Here the casting numbers will tell you everything. Being a plow truck it probably has regular truck 1.94 valve heads on it that are good for about 330 to 340 hp.

10-23-2009, 07:40 PM	#6
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	Re: chevy 350 block question ya just wanted to know the exact year cuz at 85 they made a slight casting change well thats what my engine teacher says and i know its a 4 bolt... just with my soon to be 383 build and the blocks needs to hold 450-500 horse and about 7000 rpms and id have to kill myself if it goes kaboom lol __________________ diy or die

10-23-2009, 07:57 PM	#7
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	Re: chevy 350 block question thanks alot __________________ diy or die

10-23-2009, 10:29 PM	#8
pcwillsie Registered User Join Date: Mar 2007 Location: oklahoma Posts: 118	Re: chevy 350 block question some 350 blocks were made with a little better metal high tin high nickle which makes a little stronger steel. to find out if your block is this better metal it will be casted under the timing chain cover.

10-23-2009, 11:33 PM	#9
bitchin85 Registered User Join Date: Aug 2009 Location: Lambertville MI Posts: 962	Re: chevy 350 block question if its the better metal, whats it going to say? __________________ "I'll keep my guns, money, and freedom. You can keep the "change"

10-24-2009, 12:35 AM	#10
pcwillsie Registered User Join Date: Mar 2007 Location: oklahoma Posts: 118	Re: chevy 350 block question if I remember correctly it will have a +10 or t10 cast in it. I will look back in my notes and books to see if I can find it for sure.

10-24-2009, 12:45 AM	#11
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	Re: chevy 350 block question the block will say 010 020 under the timing cover. i seriously doubt an 80's block is going to have high nickel. trying to turn 7k rpm the least of your worries is the block. you need a good crank rods and pistons. and an excellent balance job. with a 383 you shouldnt have to turn more than 6500rpm to get that hp. so long as the heads are up to the task __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.