Steering wheel help/?????

[CYLFD]

I have a 72 c10 and I pulled the busted up stock wheel off and wanted to add this wheel but it will not go on. It bottoms out on the column before it hits the groves. Any suggestions is it a possibility??? Any help is much appreciated.

[GR8-68]

Looks like a 67-68 wheel.

[CYLFD]

Originally Posted by GR8-68

Looks like a 67-68 wheel.

Yeah does that mean it will not fit? I could've sworn I'd seen them on other trucks.
Posted via Mobile Device

[brihorse]

Do you have a picture of the column with the wheel off? I just changed my 68 c10 wheel for a 69 rosewood Camaro wheel with a 67-68 Camaro hub. Maybe you have a hub on the column that needs to come off because the hub is built into that 67-68 wheel you are trying to put on.

[brihorse]

This is my column with a 67-68 Camaro hub installed. My thumb is touching the hub that would have to come off if I wanted to put my 68 truck wheel back on.

[CYLFD]

Originally Posted by brihorse

Do you have a picture of the column with the wheel off? I just changed my 68 c10 wheel for a 69 rosewood Camaro wheel with a 67-68 Camaro hub. Maybe you have a hub on the column that needs to come off because the hub is built into that 67-68 wheel you are trying to put on.

I'll get one in the morning it looked like normal though. Thanks for the reply.
Posted via Mobile Device

[CYLFD]

Here is a pic without the wheel and my old wheel. Doesn't seem like the shaft slid down either.

[GR8-68]

It should fit, make sure the shaft didnt drop down in the column housing some.

[CYLFD]

Originally Posted by GR8-68

It should fit, make sure the shaft didnt drop down in the column housing some.

Thanks I'll check that tomorrow
Posted via Mobile Device