NM WTB: Auto Brake Pedal Assembly........AGAIN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod C/10 · 11-25-2012, 10:30 PM

LOng story short I bought a pedal assembly from a member here and it did'nt have the 4 studs attached for the booster bracket. Went to dry fit it before powdercoating it and discovered the problem.......Please let me know what you have.

*mrdana60* · 11-25-2012, 11:07 PM

I m getting in a truck tomorrow and it was a auto truck. Make a offer? Would have traded you for the parts I just bought lol.

HotRod C/10 · 11-25-2012, 11:12 PM

ok, I would have too, but the seller said he was looking for the bolts and just got back with me a while ago.

*mrdana60* · 11-25-2012, 11:27 PM

Ok just let me know.

**70STOVEBOLT** · 11-26-2012, 06:30 PM

If you have a manual pedal setup, all you have to do is remove the clutch pedal from it. Also, I bolted my brake booster bracket on with the 2 studs for the manual master cylinder and there are 2 additional threaded bolt holes in the firewall for the booster bracket.

**Cash3481** · 11-26-2012, 06:59 PM

If you still need one lmk. I have an extra one out there!
Mike
Posted via Mobile Device

ScottG · 11-26-2012, 07:07 PM

I have one too. You pay shipping and it's yours.

HotRod C/10 · 11-26-2012, 08:46 PM

Nice gesture there ScottG.......send me some payment info.

**Cash3481** · 11-26-2012, 10:51 PM

Here's some pics of the deluxe pedal assembly.
Posted via Mobile Device

HotRod C/10 · 11-26-2012, 11:04 PM

thanks for the pic........im gonna see if I can remove my clutch pedal from my original set I pulled out.......may save everyone the headache that way.....except me. LOL

**Cash3481** · 11-26-2012, 11:08 PM

Quote:

Originally Posted by HotRod C/10

thanks for the pic........im gonna see if I can remove my clutch pedal from my original set I pulled out.......may save everyone the headache that way.....except me. LOL

No problem, if you need it... lmk.
Mike
Posted via Mobile Device

HotRod C/10 · 11-26-2012, 11:25 PM

Thanks Mike!

ScottG · 11-27-2012, 11:51 AM

If it doesn't work out, let me know. Will probably cost about 15 bucks to get it to you.

HotRod C/10 · 11-27-2012, 03:28 PM

Thanks Scott
Posted via Mobile Device

HotRod C/10 · 11-30-2012, 12:57 AM

Thanks to all that responded......Removing the clutch pedal was a breeze........Live and learn!

11-25-2012, 10:30 PM	#1
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	WTB: Auto Brake Pedal Assembly........AGAIN LOng story short I bought a pedal assembly from a member here and it did'nt have the 4 studs attached for the booster bracket. Went to dry fit it before powdercoating it and discovered the problem.......Please let me know what you have. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-25-2012, 11:07 PM	#2
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB: Auto Brake Pedal Assembly........AGAIN I m getting in a truck tomorrow and it was a auto truck. Make a offer? Would have traded you for the parts I just bought lol.

11-25-2012, 11:12 PM	#3
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN ok, I would have too, but the seller said he was looking for the bolts and just got back with me a while ago. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-25-2012, 11:27 PM	#4
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: WTB: Auto Brake Pedal Assembly........AGAIN Ok just let me know.

11-26-2012, 06:30 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,258	Re: WTB: Auto Brake Pedal Assembly........AGAIN If you have a manual pedal setup, all you have to do is remove the clutch pedal from it. Also, I bolted my brake booster bracket on with the 2 studs for the manual master cylinder and there are 2 additional threaded bolt holes in the firewall for the booster bracket. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-26-2012, 06:59 PM	#6
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: WTB: Auto Brake Pedal Assembly........AGAIN If you still need one lmk. I have an extra one out there! Mike Posted via Mobile Device

11-26-2012, 07:07 PM	#7
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: WTB: Auto Brake Pedal Assembly........AGAIN I have one too. You pay shipping and it's yours. __________________ '67 C20 LBW

11-26-2012, 08:46 PM	#8
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Nice gesture there ScottG.......send me some payment info. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-26-2012, 10:51 PM	#9
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: WTB: Auto Brake Pedal Assembly........AGAIN Here's some pics of the deluxe pedal assembly. Posted via Mobile Device Attached Images

11-26-2012, 11:04 PM	#10
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN thanks for the pic........im gonna see if I can remove my clutch pedal from my original set I pulled out.......may save everyone the headache that way.....except me. LOL __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-26-2012, 11:25 PM	#12
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Thanks Mike! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-27-2012, 11:51 AM	#13
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: WTB: Auto Brake Pedal Assembly........AGAIN If it doesn't work out, let me know. Will probably cost about 15 bucks to get it to you. __________________ '67 C20 LBW

11-27-2012, 03:28 PM	#14
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Thanks Scott Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-30-2012, 12:57 AM	#15
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Thanks to all that responded......Removing the clutch pedal was a breeze........Live and learn! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.