Free - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rchdrm · 10-18-2006, 10:47 PM

I just finished the disk brake conversion for the money pit and have some parts left to get rid of.

Anyone close to Garland TX that want the drum brakes, a arms (upper and lower) spindals off of a 68.
I also have the springs and stock spindals off of a 73 or 74 all 1/2 ton the 73 was heavy duty.
Let me know.

shaneschevys · 10-19-2006, 01:18 AM

Do you ever come to the ft worth area?

rchdrm · 10-20-2006, 08:12 PM

ttt

msgross · 10-20-2006, 10:36 PM

are they 6 lug drum on the front, can I pay you for shipping if they are useable? PM me if so... or pics to msgross@hotmail.com

rchdrm · 10-21-2006, 08:21 AM

yes it is a 6 lug set up and i will get pics

HUEVUDO · 10-21-2006, 11:59 AM

I need to exact same set up as you. how much did it all cost you?

rchdrm · 10-21-2006, 04:04 PM

purchased 2 1/2 drop spindals off a board member for $125. I purchased a front crossmember off of another board member $175. (later model 73 or 74 1/2 ton heavy duty.)
Bought all the bushings, calipers, rotors, pads, hoses,tie rod ends, pittman arm and all the other ball joints from O'Reily's for $200
New bumpers from Chevy duty upper and lower for $50

A buddy helped me press the old ball joints and bushings out and back in for free.

Taking the front end apart and putting it back together with my sons help Priceless.

rchdrm · 10-21-2006, 04:27 PM

pics of the parts.

10-18-2006, 10:47 PM	#1
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Free I just finished the disk brake conversion for the money pit and have some parts left to get rid of. Anyone close to Garland TX that want the drum brakes, a arms (upper and lower) spindals off of a 68. I also have the springs and stock spindals off of a 73 or 74 all 1/2 ton the 73 was heavy duty. Let me know.

10-19-2006, 01:18 AM	#2
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Free Do you ever come to the ft worth area? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

10-20-2006, 08:12 PM	#3
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Re: Free ttt

10-20-2006, 10:36 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Free are they 6 lug drum on the front, can I pay you for shipping if they are useable? PM me if so... or pics to msgross@hotmail.com

10-21-2006, 08:21 AM	#5
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Re: Free yes it is a 6 lug set up and i will get pics

10-21-2006, 11:59 AM	#6
HUEVUDO Registered User Join Date: Aug 2005 Location: Texas Posts: 239	Re: Free I need to exact same set up as you. how much did it all cost you?

10-21-2006, 04:04 PM	#7
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Re: Free purchased 2 1/2 drop spindals off a board member for $125. I purchased a front crossmember off of another board member $175. (later model 73 or 74 1/2 ton heavy duty.) Bought all the bushings, calipers, rotors, pads, hoses,tie rod ends, pittman arm and all the other ball joints from O'Reily's for $200 New bumpers from Chevy duty upper and lower for $50 A buddy helped me press the old ball joints and bushings out and back in for free. Taking the front end apart and putting it back together with my sons help Priceless.

10-21-2006, 04:27 PM	#8
rchdrm The start of the $ pit! Join Date: Jul 2005 Location: garland, Tx Posts: 153	Re: Free pics of the parts. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.