Parting t-boned 1972 Stepside AC SWB 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MattP · 03-25-2009, 07:23 AM

My truck was t-boned sitting in my driveway and I am parting out what is left.

Black stepside fender with marker reflector. It is in above average shape for a 37 year old piece of steel. Some surface rust on the inside. No rust through. $200 obo

Cab mounted AC components. Heater A/C Box, Evaporator, Heater core, Blower, all inside cab components. Some of the ducting will need to be replaced. No condenser, drier, compressor, high pressure lines. $500 obo

Tail lights for Step side including brackets. $50 obo

Chains for Stepside tailgate. $25 obo

Passenger side step with support bracket. Surface rust removed with electrolysis. $30 obo

Front clip complete. Fenders, Hood, 72 grill and surround, core support (brand new and painted with POR15). These are 37 years old. Light surface rust only, but still in pretty good shape. $500 obo. Would prefer to sell complete.

SWB 4X4 rolling chassis with driver side mangled cab and clean title. Frame matches cab VIN. Original 4:10 posi axle in the rear and non matching drum axle in the front. Frame is completely straight and complete. This was a Nevada truck so the frame is in really good shape. $1000

If you would like pics please email pinionblack at yahoo com.

Local pickup preferred, but will ship 64118

oldschooler · 03-25-2009, 07:41 AM

If you decide to split up the front. I might be interested in the fenders. Also shipping might be an issue. Hope you sell it whole, but wanted to jump in just in case. If you were closer I would take the whole thing. Later, Rich

teeitup · 03-25-2009, 08:26 AM

Could I get some pics of the whole truck, might be interested in it all. Thanks Randy

**special-K** · 03-25-2009, 09:06 AM

That sucks your truck got hit.It hurts to sell what once was a nice truck in pieces because of such a thing.
Which side is the good side?I`m interested in the side step and support.I have two for one side and none for the other.I have to check.

Scott Johnson · 03-25-2009, 01:33 PM

I would like the transfer case adapter if it has a TH 350.

drivingslow · 03-25-2009, 01:48 PM

Sorry to hear about your truck getting t-boned.

If you are parting out completely...

Do you have the transmission linkage for a column shift - 350 automatic linkage?

Someone placed a B&M MEGASHIFTER into my 1972 Chevy C20 small block - which I still use as a daily driver, slowly restoring.

I really wanted to return the shifter to the original column, to bring it back to stock.

Thanks...

If anyone else has a tip or the linkage, please let me know.

I was overseas for awhile, gone for sometime, and cannot post a new thread now.

jay_shy · 03-25-2009, 07:09 PM

rear bumper brackets if original?

price + shipping to 16635

Jason

Beatcoaster · 03-26-2009, 12:56 AM

Got a gauge cluster with or without tach that happen to make it through the accident?

**bigdon-70blazer** · 03-26-2009, 08:25 AM

Steering wheel?

vasquezmrysvll · 03-26-2009, 06:13 PM

ignition switch with spacer?

**special-K** · 03-26-2009, 09:02 PM

Hello?

otsenre · 03-26-2009, 09:45 PM

72 4x4 accelerator cable

**rockc** · 03-27-2009, 02:21 PM

I am interested in the frame. Was it a automtic tranny?

pinnedcr250f · 03-30-2009, 01:11 AM

Do you still have the inner and outer grill? If so how much?

ckexswb · 03-30-2009, 10:56 AM

How about a 4x4 shifter knob.

bowtiegreg · 03-30-2009, 11:47 AM

In need of steering column, have ya got one in decent shape? Sorry for your loss, had one of my own, but no need for those details. Good luck!

Beatcoaster · 03-30-2009, 11:51 AM

I take it MattP doesn't visit often?

tools39hotrod · 04-02-2009, 08:27 AM

hey im here in independence mo and looking for a rt side stepside fenderif you have one jtuell@fortosage.net

teeitup · 04-02-2009, 12:20 PM

I've emailed him but still have not heard from him

STOCKISH · 04-02-2009, 01:42 PM

Good Luck. Seems like a bit of a trend here lately.

meathead95 · 04-03-2009, 08:44 AM

pm sent

charlesratcliff39 · 04-03-2009, 06:37 PM

Would like to buy the drivers stepside fender, shipping to Sheridan , Arkansas 72150 ?

Jtrux · 04-03-2009, 06:50 PM

Jeopardy theme song in the background...

oldschooler · 04-04-2009, 04:53 AM

he was just on here yesterday evening.

pinnedcr250f · 04-15-2009, 06:00 PM

Do you have the AC brackets?

03-25-2009, 07:23 AM	#1
MattP Registered User Join Date: Jan 2006 Location: Kansas City Posts: 3	Parting t-boned 1972 Stepside AC SWB 4x4 My truck was t-boned sitting in my driveway and I am parting out what is left. Black stepside fender with marker reflector. It is in above average shape for a 37 year old piece of steel. Some surface rust on the inside. No rust through. $200 obo Cab mounted AC components. Heater A/C Box, Evaporator, Heater core, Blower, all inside cab components. Some of the ducting will need to be replaced. No condenser, drier, compressor, high pressure lines. $500 obo Tail lights for Step side including brackets. $50 obo Chains for Stepside tailgate. $25 obo Passenger side step with support bracket. Surface rust removed with electrolysis. $30 obo Front clip complete. Fenders, Hood, 72 grill and surround, core support (brand new and painted with POR15). These are 37 years old. Light surface rust only, but still in pretty good shape. $500 obo. Would prefer to sell complete. SWB 4X4 rolling chassis with driver side mangled cab and clean title. Frame matches cab VIN. Original 4:10 posi axle in the rear and non matching drum axle in the front. Frame is completely straight and complete. This was a Nevada truck so the frame is in really good shape. $1000 If you would like pics please email pinionblack at yahoo com. Local pickup preferred, but will ship 64118

03-25-2009, 07:41 AM	#2
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Parting t-boned 1972 Stepside AC SWB 4x4 If you decide to split up the front. I might be interested in the fenders. Also shipping might be an issue. Hope you sell it whole, but wanted to jump in just in case. If you were closer I would take the whole thing. Later, Rich

03-25-2009, 08:26 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Could I get some pics of the whole truck, might be interested in it all. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-25-2009, 09:06 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Parting t-boned 1972 Stepside AC SWB 4x4 That sucks your truck got hit.It hurts to sell what once was a nice truck in pieces because of such a thing. Which side is the good side?I`m interested in the side step and support.I have two for one side and none for the other.I have to check. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-25-2009 at 02:17 PM.

03-25-2009, 01:33 PM	#5
Scott Johnson Junior Member Join Date: Feb 2003 Location: Louisiana Posts: 281	Re: Parting t-boned 1972 Stepside AC SWB 4x4 I would like the transfer case adapter if it has a TH 350. __________________ 71 C10 Step Daily Driver 72 K10 Suburban Work in Progress www.louisianaclassictruckclub.com

03-25-2009, 01:48 PM	#6
drivingslow Registered User Join Date: Jan 2007 Location: New Jersey Posts: 76	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Sorry to hear about your truck getting t-boned. If you are parting out completely... Do you have the transmission linkage for a column shift - 350 automatic linkage? Someone placed a B&M MEGASHIFTER into my 1972 Chevy C20 small block - which I still use as a daily driver, slowly restoring. I really wanted to return the shifter to the original column, to bring it back to stock. Thanks... If anyone else has a tip or the linkage, please let me know. I was overseas for awhile, gone for sometime, and cannot post a new thread now. Last edited by drivingslow; 03-25-2009 at 01:48 PM.

03-25-2009, 07:09 PM	#7
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Parting t-boned 1972 Stepside AC SWB 4x4 rear bumper brackets if original? price + shipping to 16635 Jason Last edited by jay_shy; 03-25-2009 at 07:11 PM.

03-26-2009, 12:56 AM	#8
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Got a gauge cluster with or without tach that happen to make it through the accident?

03-26-2009, 08:25 AM	#9
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Steering wheel?

03-26-2009, 06:13 PM	#10
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting t-boned 1972 Stepside AC SWB 4x4 ignition switch with spacer? __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-26-2009, 09:02 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Hello? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-26-2009, 09:45 PM	#12
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: Parting t-boned 1972 Stepside AC SWB 4x4 72 4x4 accelerator cable

03-27-2009, 02:21 PM	#13
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 633	Re: Parting t-boned 1972 Stepside AC SWB 4x4 I am interested in the frame. Was it a automtic tranny? __________________ 72 chevy 3/4 ton 4X4

03-30-2009, 01:11 AM	#14
pinnedcr250f Registered User Join Date: Mar 2009 Location: phx,az Posts: 21	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Do you still have the inner and outer grill? If so how much? __________________ John 71 Chevy C10 02 Chevy Dmax 06 Yahama Rhino:

03-30-2009, 10:56 AM	#15
ckexswb 67-72=-5 Join Date: Jun 2007 Location: calif/ beach Posts: 807	Re: Parting t-boned 1972 Stepside AC SWB 4x4 How about a 4x4 shifter knob.



Register or Log In To remove these advertisements.

03-30-2009, 11:47 AM	#16
bowtiegreg Registered User Join Date: Feb 2008 Location: Dripping Springs, Texas Posts: 3	Re: Parting t-boned 1972 Stepside AC SWB 4x4 In need of steering column, have ya got one in decent shape? Sorry for your loss, had one of my own, but no need for those details. Good luck!

03-30-2009, 11:51 AM	#17
Beatcoaster 69 Fleetside Join Date: Mar 2009 Location: Lake Stevens, WA Posts: 333	Re: Parting t-boned 1972 Stepside AC SWB 4x4 I take it MattP doesn't visit often?

04-02-2009, 08:27 AM	#18
tools39hotrod Registered User Join Date: Mar 2008 Location: independence, mo Posts: 1	Re: Parting t-boned 1972 Stepside AC SWB 4x4 hey im here in independence mo and looking for a rt side stepside fenderif you have one jtuell@fortosage.net

04-02-2009, 12:20 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting t-boned 1972 Stepside AC SWB 4x4 I've emailed him but still have not heard from him __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2009, 01:42 PM	#20
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Good Luck. Seems like a bit of a trend here lately. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

04-03-2009, 08:44 AM	#21
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Parting t-boned 1972 Stepside AC SWB 4x4 pm sent __________________ 72 2wd blazer 72 swb 4x4

04-03-2009, 06:37 PM	#22
charlesratcliff39 Registered User Join Date: Mar 2009 Location: Sheridan , Arkansas Posts: 279	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Would like to buy the drivers stepside fender, shipping to Sheridan , Arkansas 72150 ?

04-03-2009, 06:50 PM	#23
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Jeopardy theme song in the background... __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

04-04-2009, 04:53 AM	#24
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Parting t-boned 1972 Stepside AC SWB 4x4 he was just on here yesterday evening.

04-15-2009, 06:00 PM	#25
pinnedcr250f Registered User Join Date: Mar 2009 Location: phx,az Posts: 21	Re: Parting t-boned 1972 Stepside AC SWB 4x4 Do you have the AC brackets? __________________ John 71 Chevy C10 02 Chevy Dmax 06 Yahama Rhino:

Register or Log In To remove these advertisements.