Tow hook question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72supermike · 05-18-2014, 11:08 PM

I picked up a set of tow hooks off a 72 3/4ton 4wd this weekend. One hook is a 72 extreme bend and the other is a 69-71 hook. Is it possible they were installed that way from the factory? Seems strange to have a mismatched set.

SS Tim · 05-18-2014, 11:30 PM

Was V76 FRONT TOW HOOK on the SPID?

**too much stuff** · 05-18-2014, 11:33 PM

I would doubt if it left the factory like that. Want to trade your extreme bend for a match to your other one possibly?

72supermike · 05-19-2014, 12:06 AM

I checked with the owner and he said it does have tow hooks listed on the SPID. Kinda interesting.

**Ol Blue K20** · 05-19-2014, 12:53 PM

My set was mis matched and they were listed on the spid. Also was original owner, he said he tried to warranty the "bent" one when new and the dealer told him no. I sold the 69-72 and bought a single extreme.

**undertaker72** · 05-19-2014, 01:36 PM

I have seen a couple this way usally the extreme on driver side , I assume for spring clearance , and they must of figured the pass side is a little easier , it had the straighter one

72supermike · 05-20-2014, 12:14 AM

Thanks for the info guys. Looking as though it could have been a factory install.

I contacted the owner because he had the truck listed for sale on cragislist. I saw the hooks and wanted them. He was asking $4500 for the truck and said he would separate the hooks for me. When I showed up to get them, he mentioned that he decided he wanted to keep the truck. He had just been to a car show and saw a few nice 67-72 trucks.

When I contacted him again to see about the spid having tow hooks, I also mentioned that I might one day be interested in buying the truck. It's pretty straight and original 4wd trucks that aren't beat and rusted out are getting harder to find. I told him to write my # down an put it in the glovebox. He quickly wrote back and asked what I'd pay for the truck. Well, I met with him this evening and drove the truck home. I couldn't pass up a really good deal.

The front end is really tight. Has new brakes and runs good and strong. The 4 speed pops out of 3rd but I'm sure I can figure that out. Has rust in the rockers, a little in the cab corners, and the bottom of one door. Core support and inner fenders are solid. Same with the cab supports. And just minor dings and dents here and there. I have 2 of these trucks now. Bringing the total to 5 of these trucks I've owned.

Here are some pics. Also threw in a pic of dad's new 2015 2500 gmc and the other 72.

05-18-2014, 11:08 PM	#1
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Tow hook question I picked up a set of tow hooks off a 72 3/4ton 4wd this weekend. One hook is a 72 extreme bend and the other is a 69-71 hook. Is it possible they were installed that way from the factory? Seems strange to have a mismatched set.

05-18-2014, 11:30 PM	#2
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Tow hook question Was V76 FRONT TOW HOOK on the SPID? __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

05-18-2014, 11:33 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,765	Re: Tow hook question I would doubt if it left the factory like that. Want to trade your extreme bend for a match to your other one possibly? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-19-2014, 12:06 AM	#4
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Re: Tow hook question I checked with the owner and he said it does have tow hooks listed on the SPID. Kinda interesting.

05-19-2014, 12:53 PM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,242	Re: Tow hook question My set was mis matched and they were listed on the spid. Also was original owner, he said he tried to warranty the "bent" one when new and the dealer told him no. I sold the 69-72 and bought a single extreme. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-19-2014, 01:36 PM	#6
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Tow hook question I have seen a couple this way usally the extreme on driver side , I assume for spring clearance , and they must of figured the pass side is a little easier , it had the straighter one

05-20-2014, 12:14 AM	#7
72supermike Registered User Join Date: Nov 2009 Location: Harrison, Idaho Posts: 214	Re: Tow hook question Thanks for the info guys. Looking as though it could have been a factory install. I contacted the owner because he had the truck listed for sale on cragislist. I saw the hooks and wanted them. He was asking $4500 for the truck and said he would separate the hooks for me. When I showed up to get them, he mentioned that he decided he wanted to keep the truck. He had just been to a car show and saw a few nice 67-72 trucks. When I contacted him again to see about the spid having tow hooks, I also mentioned that I might one day be interested in buying the truck. It's pretty straight and original 4wd trucks that aren't beat and rusted out are getting harder to find. I told him to write my # down an put it in the glovebox. He quickly wrote back and asked what I'd pay for the truck. Well, I met with him this evening and drove the truck home. I couldn't pass up a really good deal. The front end is really tight. Has new brakes and runs good and strong. The 4 speed pops out of 3rd but I'm sure I can figure that out. Has rust in the rockers, a little in the cab corners, and the bottom of one door. Core support and inner fenders are solid. Same with the cab supports. And just minor dings and dents here and there. I have 2 of these trucks now. Bringing the total to 5 of these trucks I've owned. Here are some pics. Also threw in a pic of dad's new 2015 2500 gmc and the other 72.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.