Pick & Pull in N. Ala. *71 Cheyenne* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 01-26-2006, 10:53 PM

Parting out complete running, driving 71 lwb Cheyenne. Cab, sheetmetal, and tailgate are rusty but lots of good parts. Will ship small stuff. Located in NW Alabama. Here's a list. Anything else, just ask. Shipping cost will be added.
Joshua

1. 350 4 bolt motor - runs good $400 complete
2. 3.08 open rear $150, front disc set up $125
3. power steering complete set up $175
4. power brake set up $75
5. ALL a/c parts (everyting!) $350
6. automatic trans conversion, everything but trans. $150

GABE310 · 01-26-2006, 11:06 PM

How much for just the linkage for the tranny.

**68350** · 01-27-2006, 12:02 AM

How much for vent windows(if tinted), marker lights, glovebox(if still has sticker on it), chrome dash knobs, lighter, a/c control, door panels??

Jetmech727 · 01-27-2006, 12:41 AM

I need the steel inner door panels if they are in good shape. pm me with price

Jetmech727 · 01-27-2006, 12:42 AM

still thinking about the power steering

al's71gmc · 01-27-2006, 04:08 AM

How much for the exterior mirrors? What condition are they in? Shipping to 89316? Thanks, Al

**JQ-72** · 01-29-2006, 11:13 AM

I'm back - been working all weekend!
Gabe - rather not break up the coulmn parts just yet.
68350 - tinted vent windows (not broken) $30 pr. - 4 marker lights $10 - dash knobs $5 - lighter $5 - a/c panel (top lever broken) $20 door panels (real nice) $40 pr.
Jetmech - pm sent
Al - mirrors are averaged used condition, pass mirror is missing $20

al's71gmc · 01-29-2006, 09:52 PM

JQ Is that $20 shipped? If so I'll take it. Also interested in the lower trim piece on the driver door, if it's in decent shape. PM me with payment info. Thanks, Al

bigblockc10 · 01-29-2006, 10:03 PM

how much to ship the power brake set-up to 18966

woodridge · 01-29-2006, 10:44 PM

JQ, PM'd you.

**w314speed** · 01-30-2006, 05:15 AM

PM sent!

**w314speed** · 01-30-2006, 05:23 AM

Are the lower cab moldings at rear glass in good shape/no dents? Price? Thanks, Dan

al's71gmc · 01-30-2006, 07:49 AM

I'll take the mirror for sure. Skip the trim piece. If 68350 doesn't take the dash knobs and lighter, I'd like those too. PM me with my total, please. Do you take paypal?
Thanks, Al

al's71gmc · 02-01-2006, 09:01 AM

I'd love to buy the complete a/c setup, but I've got too many other things higher on the priority list

here's a ttt for ya
Al

lutherb69 · 02-02-2006, 01:59 AM

Will you sell the dash and AC/Heater control if so how much with shipping to 01731 Hanscom AFB Mass.

EyeH8the24 · 02-02-2006, 06:54 AM

what kind of shape is the bed in?

gostranger · 02-02-2006, 07:27 AM

if the bed is some thing you are going to cut up i need the rear taillight area passenger side and the tail light bucket let me know and hit me with a price thanks alot

01-26-2006, 10:53 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,615	Pick & Pull in N. Ala. 71 Cheyenne Parting out complete running, driving 71 lwb Cheyenne. Cab, sheetmetal, and tailgate are rusty but lots of good parts. Will ship small stuff. Located in NW Alabama. Here's a list. Anything else, just ask. Shipping cost will be added. Joshua 1. 350 4 bolt motor - runs good $400 complete 2. 3.08 open rear $150, front disc set up $125 3. power steering complete set up $175 4. power brake set up $75 5. ALL a/c parts (everyting!) $350 6. automatic trans conversion, everything but trans. $150 Attached Images

01-26-2006, 11:06 PM	#2
GABE310 Registered User Join Date: Mar 2001 Location: SOUTHERN,CA Posts: 429	Re: Pick & Pull in N. Ala. 71 Cheyenne How much for just the linkage for the tranny. __________________ 68 CHEVY SWB 95 HARLEY DAVIDSON NOSTALGIA 68 CAMARO CONV 65 CHEVELLE CONV 39 CHEVY CABOVER

01-27-2006, 12:02 AM	#3
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Pick & Pull in N. Ala. 71 Cheyenne How much for vent windows(if tinted), marker lights, glovebox(if still has sticker on it), chrome dash knobs, lighter, a/c control, door panels?? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

01-27-2006, 12:41 AM	#4
Jetmech727 Registered User Join Date: Sep 2004 Location: Indianapolis,IN Posts: 148	Re: Pick & Pull in N. Ala. 71 Cheyenne I need the steel inner door panels if they are in good shape. pm me with price __________________ "When cows laugh, does milk come out of their nose?"

01-27-2006, 12:42 AM	#5
Jetmech727 Registered User Join Date: Sep 2004 Location: Indianapolis,IN Posts: 148	Re: Pick & Pull in N. Ala. 71 Cheyenne still thinking about the power steering __________________ "When cows laugh, does milk come out of their nose?" Last edited by Jetmech727; 01-27-2006 at 12:48 AM.

01-27-2006, 04:08 AM	#6
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Pick & Pull in N. Ala. 71 Cheyenne How much for the exterior mirrors? What condition are they in? Shipping to 89316? Thanks, Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

01-29-2006, 11:13 AM	#7
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,615	Re: Pick & Pull in N. Ala. 71 Cheyenne I'm back - been working all weekend! Gabe - rather not break up the coulmn parts just yet. 68350 - tinted vent windows (not broken) $30 pr. - 4 marker lights $10 - dash knobs $5 - lighter $5 - a/c panel (top lever broken) $20 door panels (real nice) $40 pr. Jetmech - pm sent Al - mirrors are averaged used condition, pass mirror is missing $20

01-29-2006, 09:52 PM	#8
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Pick & Pull in N. Ala. 71 Cheyenne JQ Is that $20 shipped? If so I'll take it. Also interested in the lower trim piece on the driver door, if it's in decent shape. PM me with payment info. Thanks, Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

01-29-2006, 10:03 PM	#9
bigblockc10 Registered User Join Date: Feb 2003 Location: Holland Pa. Posts: 76	Re: Pick & Pull in N. Ala. 71 Cheyenne how much to ship the power brake set-up to 18966 __________________ 1970 C10 Stepside (soon to be a 68 w/PS/PB/S&W back-half narrowed F**D 9inch w/Discs) 66 427/435 corvette motor (hopefully 871 Blower) 66 M21 4 speed (swapped in a built TH400) 31/16.5/15 Mickeys (soon to be 29.5X18.5X15 MT) 1972 C10 Stepside Pro-Street 1988 bed 3" Top Chop Custom Red Pearl paint w/overlapping Ghost Flames P/S P/W P/B P/DL P/door open Everything Shaved Frenched antenna 461CI BBC BDS Blower 1100 Dynoed HP TH400 Super Heavy Duty Full Back-Half Narrowed 12 Bolt 4:10

01-29-2006, 10:44 PM	#10
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Pick & Pull in N. Ala. 71 Cheyenne JQ, PM'd you. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-30-2006, 05:15 AM	#11
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Pick & Pull in N. Ala. 71 Cheyenne PM sent!

01-30-2006, 05:23 AM	#12
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Pick & Pull in N. Ala. 71 Cheyenne Are the lower cab moldings at rear glass in good shape/no dents? Price? Thanks, Dan

01-30-2006, 07:49 AM	#13
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Pick & Pull in N. Ala. 71 Cheyenne I'll take the mirror for sure. Skip the trim piece. If 68350 doesn't take the dash knobs and lighter, I'd like those too. PM me with my total, please. Do you take paypal? Thanks, Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

02-01-2006, 09:01 AM	#14
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Pick & Pull in N. Ala. 71 Cheyenne I'd love to buy the complete a/c setup, but I've got too many other things higher on the priority list here's a ttt for ya Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

02-02-2006, 01:59 AM	#15
lutherb69 Registered User Join Date: Oct 2005 Location: Langley AFB, Va (Army) Posts: 124	Re: Pick & Pull in N. Ala. 71 Cheyenne Will you sell the dash and AC/Heater control if so how much with shipping to 01731 Hanscom AFB Mass.



Register or Log In To remove these advertisements.

02-02-2006, 06:54 AM	#16
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: Pick & Pull in N. Ala. 71 Cheyenne what kind of shape is the bed in?

02-02-2006, 07:27 AM	#17
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: Pick & Pull in N. Ala. 71 Cheyenne if the bed is some thing you are going to cut up i need the rear taillight area passenger side and the tail light bucket let me know and hit me with a price thanks alot

Register or Log In To remove these advertisements.