![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2004
Posts: 24
|
Door locks sticking
Sometimes my door locks on my 68 C-10 are very difficult to lock and unlock. You really have to push or pull hard. How do I fix this? I wanted to install power locks, but the installer said it took too much force to toggle the locks, and my locks would burn out the power motor very quickly.
any advice? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2003
Location: north of Phx AZ about 30 miles
Posts: 698
|
Remove your door panel and lube all of the linkages in there. It is best to remove and clean them, then lube and reinstall all the parts. You can do it with spray lube and get decent results though.
__________________
Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2004
Posts: 24
|
Thanks, walker. I'll give that a shot.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
If lubing does not help, try pushing in on the door when locking/unlocking. If pushing on the door helps, then there is a good chance the latches are worn and replacing should be considered.
Jim |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2004
Location: Penelope, Texas
Posts: 393
|
Mine was doing the same really hard to lock. I just took off the door panel and sprayed WD-40 on the lock and latch and it works great now.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|